RS-1_instruction manual.pdf - 第798页

Part 2 D etaile d Descript ion of E ach Functi on Chapter 9 M anual Control 9- 26 <Ele ctr ic DTS> 1) Origin When you pres s the <EXEC> but ton, the D TS returns t o the origin. 2) Su ppl y Req uest This butt…

Part 2 Detailed Description of Each Function Chapter 9 Manual Control

9-25

Electric stick feeder

E Stick N

E Stick W

Electric DTS

(2) Control item

Select a control item by radio button and exert control by the <EXEC> button.

Selectable control items vary depending on the device type.

When the selected feeder is a double lane feeder, select a lane by the combo box.

1) Initialize

Enter “Origin offset” and press the <EXEC> button, and a return-to-origin operation is

performed.

For the RF **mm feeder, this button cannot be selected.

2) One-pitch feed forward (backward)

Enter “Correction” and press the <EXEC> button, and a one-pitch feed

forward/backward operation is performed.

3) Feed designated distance

Enter “Feed distance” and press the <EXEC> button, a feed designated distance

operation is performed.

For the RF **mm feeder, this button cannot be selected.

4) Step feed forward (backward)

Select the <EXEC> button, and a step feed operation is performed.

For the RF **mm feeder, this button cannot be selected.

1) One-pitch Feed Forward

When you select the <EXEC> button, the machine feeds a stick forward by one pitch.

Part 2 Detailed Description of Each Function Chapter 9 Manual Control

9-26

1) Origin

When you press the <EXEC> button, the DTS returns to the origin.

2) Supply Request

This button puts the DTS in the state for supplying the machine with components (you can

open the cover).

When the DTS can supply the machine with components, you cannot return the DTS to the

origin, or pull a tray from the DTS.

3) Speed High 2/Speed High/Speed Low

Select the speed at which a tray is pulled out from the DTS with one of these buttons.

4) Tray A/Tray B/Tray A/B

When you select the <EXEC> button, the DTS starts pulling out a tray at the selected speed.

If the selected tray has been pulled out already when you execute the <Tray A> or the <Tray

B> button, the DTS does not pull out the corresponding tray.

(3) Setting

When the electric feeder or electric stick feeder is connected, the <Set> button is enabled.

When you press the <Set> button, the profile setting dialog of the selected feeder is

displayed. After selecting a feed speed or tape type by the combo box, press the <EXEC>

button. When “Electric bank connected” or “Feeder connected” is set to “Not connected,”

the <EXEC> button cannot be operated.

Part 2 Detailed Description of Each Function Chapter 9 Manual Control

9-27