RS-1_instruction manual.pdf - 第996页

Part 2 D etaile d Descript ion of E ach Functi on Chapter 12 Handling th e Optional Device s 12 - 112 12.16.3 Flowchart When you att ach a nozz le on a head manu ally, follow the proc edure below. No . Flowchart Remarks …

100%1 / 1058
Part 2 Detailed Description of Each Function Chapter 12 Handling the Optional Devices
12-111
12.16.2.1 Removing a diffuser (only when you select a nozzle 7111)
If you use the manual nozzle attachment function when a nozzle 7111 (40211594) is selected,
remove three fixing screws shown in the figure below, and then remove the diffuser from the
LNC120 sensor.
If you do not remove the diffuser, select a nozzle 7111L (40249881).
WARNING
To avoid any accident caused by sudden activation of the
machine, turn off the power.
Diffuser
LNC120 sensor
Part 2 Detailed Description of Each Function Chapter 12 Handling the Optional Devices
12-112
12.16.3 Flowchart
When you attach a nozzle on a head manually, follow the procedure below.
No.
Flowchart
Remarks
1
Refer to Chapter 8 “Machine Setup” of the
Instruction Manual.
2
Insert a nozzle until it is locked.
3
Refer to Chapter 2 “Production” of the
Instruction Manual
4
(See Section 4.4.1.)
5
Refer to Chapter 2 “Production” of the
Instruction Manual
6
Refer to Chapter 8 “Machine Setup” of the
Instruction Manual.
7
(See Section 4.4.2.)
8
Refer to Chapter 4 “Creating a Production
Program” of the Instruction Manual.
9
Refer to Chapter 2 “Production” of the
Instruction Manual
10
Refer to Chapter 2 “Production” of the
Instruction Manual
11
Refer to Chapter 2 “Production” of the
Instruction Manual
12
Perform inspections at the regular
intervals.
(Refer to Chapter 3 “Maintenance” of the
Instruction Manual.)
Manually attach a nozzle on a head.
Turn on the power.
Fix the adjacent heads.
Enable the manual nozzle attachment function.
Assign nozzles.
Load the nozzle data.
Create/edit a production program.
Daily inspection
Return to the origin.
Production
Finish the production.
Turn off the power.
Part 2 Detailed Description of Each Function Chapter 12 Handling the Optional Devices
12-113
When you attach a nozzle on a head manually for the second time and thereafter, follow the
procedure below.
No.
Flowchart
Remarks
1
Push the nozzle into the head until it is
locked.
2
Refer to Chapter 2 “Production” of the
Instruction Manual.
3
Refer to Chapter 2 “Production” of the
Instruction Manual.
4
Refer to Chapter 4 “Creating a Production
Program” of the Instruction Manual.
5
Refer to Chapter 2 “Production” of the
Instruction Manual.
6
Refer to Chapter 2 “Production” of the
Instruction Manual.
7
Refer to Chapter 2 “Production” of the
Instruction Manual.
8
Perform inspections at the regular
intervals.
(Refer to Chapter 3 “Maintenance” of the
Instruction Manual.)
Finish the production.
Turn off the power.
Create/edit a production program.
Check the manual nozzle attachment condition.
Turn on the power.
Production
Daily inspection
Return to the origin.