RS-1_instruction manual.pdf - 第315页

Part 1 Basic Operat ion Chapter3 D aily maintenance 3- 23 Where to clean Fan motor filter Cleaning frequency : Every half year How to clean Clean the fan motor filter 1) Chec k to see if the fan mo tor cov er (filter) at…

Part 1 Basic Operation Chapter3 Daily maintenance

3-22

Where to clean

VCS unit

Cleaning frequency:

Every week

How to clean

Cleaning of the top side of the VCS

Tools to be used:

Waste cloth

Recommended solution:

IPA

1) Check to see if there is any foreign substance such as dust on the top side (window and LED) of the

VCS.

If there is, clean the top side of the VCS with dry waste cloth or gauze and blow off the stains stuck

to the LED with air.

Window

LED

Part 1 Basic Operation Chapter3 Daily maintenance

3-23

Where to clean

Fan motor filter

Cleaning frequency:

Every half year

How to clean

Clean the fan motor filter

1) Check to see if the fan motor cover (filter) attached before and after the center cover that is located

on the bottom of the inside of the machine is not stained.

2) When the filter is remarkably stained (attachment of dirt or dust), remove the fan motor and remove

the dirty. (Pull out the cover for removal.)

3) If it is difficult to eliminate the dirt of the filter or the filter is damaged, replace it with the filter of the

following part No.

Fan motor filter (5-filter set)

Part No.

HM001010020

Part 1 Basic Operation Chapter3 Daily maintenance

3-24

Where to clean

Cutter blade

Cleaning frequency:

Every six months

How to clean

Cleaning of the cutter blade

Tools to be used: Paint brush

Grease to be used:

6459 grease

* To clean the blade, be sure to wear stab-resistant gloves.

1) Be sure to turn off the power of the machine before cleaning the cutter blade.

2) Wear stab-resistant gloves, and then clean the blade with waste cloth or similar material.

(Apply alcohol to the blade to wipe off deteriorated grease also.)

Cutter unit

Locations to clean and apply grease

WARNING

Since the cutter blade is exposed, never touch it with your bare hand.

Movable blade

Fixed blade

Clean.