RS-1_instruction manual.pdf - 第313页
Part 1 Basic Operat ion Chapter3 D aily maintenance 3- 21 Where to clean OCC (Po larizing filter) Cleaning frequency : Every week How to clean Cleaning of dust an d/or a f oreign s ubstance from the OCC (polari zed filte…
Part 1 Basic Operation Chapter3 Daily maintenance
3-20
Where to clean
Exchange trolley
Cleaning frequency:
Every week
How to clean
Cleaning of dust and/or a foreign substance from the feeder
bank
Tool to be used:
Brush and/or cleaner
1) Clean the overall feeder exchange trolley on regular basis.
In addition, clean the feeder bank with a cleaner or similar device if there is a foreign substance
such as a chip on it before attaching a feeder such as a tape feeder on it.
2) Check to see if there is no foreign substances such as a chip around the “bank locating pin” (both
sides
<For an electric feeder>
1) Before inserting a feeder exchange trolley into the main unit, clean off the topside of the bank lifter
with a cleaner or other tool if there is any foreign substance such as a chip component on the
topside of the bank lifter.
2) Check to see if there is no foreign substance such as a chip component around the “bank locating
pins” (on both sides) also.
3) Check to see if there is no foreign substance such as a chip component around [O-Ring] (right-hand
side) also.
Where to clean
Bank lifter
Cleaning frequency:
Every week
How to clean
Cleaning of dust and/or a foreign substance from the topside
of the bank lifter
Tool to be used:
Brush and/or cleaner
Bank locating pin (on both sides)
Bank lifter L
O-ring
Bank lifter R
Bank locating pin (on both sides)
Part 1 Basic Operation Chapter3 Daily maintenance
3-21
Where to clean
OCC (Polarizing filter)
Cleaning frequency:
Every week
How to clean
Cleaning of dust and/or a foreign substance from the OCC
(polarized filter)
Tool to be used:
Air gun
1) Check to see if there is no dust and/or foreign substance on the polarizing filter of the OCC. If there
is any, remove it with an air gun or like.
Polarizing filter
Part 1 Basic Operation Chapter3 Daily maintenance
3-22
Where to clean
VCS unit
Cleaning frequency:
Every week
How to clean
Cleaning of the top side of the VCS
Tools to be used:
Waste cloth
Recommended solution:
IPA
1) Check to see if there is any foreign substance such as dust on the top side (window and LED) of the
VCS.
If there is, clean the top side of the VCS with dry waste cloth or gauze and blow off the stains stuck
to the LED with air.
Window
LED