RS-1_instruction manual.pdf - 第809页

Part 2 D etaile d Descript ion of E ach Functi on Chapter 9 M anual Control 9- 37 9.6.6 Serv o statu s When you se lect [Other ] - [ Servo stat us] in the menu , the serv o status dialog appears. (1) Servo statusT he cur…

100%1 / 1058
Part 2 Detailed Description of Each Function Chapter 9 Manual Control
9-36
9.6.5.1 Sensor information
When you press the <Sensor information> button in the driver status dialog, the sensor
information dialog appears.
The status of the origin nearness sensor and limit sensor are displayed as ON/OFF, and the
thermistor temperature information is displayed numerically.
9.6.5.2 Axis feedback position information
When you press the <Axis feedback position information> button in the driver status dialog, the
axis fed back position information appears.
Part 2 Detailed Description of Each Function Chapter 9 Manual Control
9-37
9.6.6 Servo status
When you select [Other] - [Servo status] in the menu, the servo status dialog appears.
(1) Servo statusThe current condition of each servo is displayed here.
A unit at which a servo error occurs is displayed in red.
When you move the cursor over a unit icon or each sensor icon, the corresponding tool hint
appears on the screen.
Unit
Y axis right
Amplifier
Motor
Limit sensor plus/minus
Y axis left
Amplifier
Motor
Limit sensor plus/minus
X axis
Amplifier
Motor
Limit sensor plus/minus
Theta 1 to Theta 4
Z1 to Z8, ZA
Position board
Part 2 Detailed Description of Each Function Chapter 9 Manual Control
9-38
9.6.7 Component verification
When you select the [CVS control] command from the “Other” menu, the dialog box for indicating
the servo condition appears on the screen.
This dialog box is displayed only when the machine is equipped with a CVS option.
(1) Status
The measurement result is displayed here after measurement finishes.
(2) Move XY to measuring position
The head specified with one of these buttons is moved in the XY direction.
(3) Control item
Select the desired control item with the corresponding radio button.
1) Meas. Capacitor
The capacity of a capacitor component is measured. Press the [MEAS.] button and
the [MODE] button for control.
2) Meas. of diode
The polarity of a diode component is measured. Press the [MEAS.] button and the
[MODE] button for control.
3) Meas. of resistor
The resistance value of the resistor component is measured. Press the [MEAS.]
button and the [MODE] button for control.