RS-1_instruction manual.pdf - 第85页
Part 1 B asic O peration Chapter 1 Overv iew of the Machine 1- 67 Configuration of the function buttons The funct ion butt ons as well a s the menus ar e displ ayed in the Oper ation are a and the Infor mation area of th…
Part 1 Basic Operation Chapter 1 Overview of the Machine
1-66
(7) Menu organization of the Self Check screen
No. Operation area Sub menu
1
Stain check
CAL Block Mark
Filter stain
VCS stain
2
Head Offset
Head Offset
Laser/sensor height
Vacuum
3 VCS offset
VCS offset
Multi-recognition offset
4 ATC Slide Plate ATC Slide Plate
Part 1 Basic Operation Chapter 1 Overview of the Machine
1-67
Configuration of the function buttons
The function buttons as well as the menus are displayed in the Operation area and the Information
area of the RS-1/1R screen.
(1) Function buttons in the Operation area
The function buttons are allocated in the Operation area as shown below.
No. Icon Name Overview
1
Unit control
If the quick control operation can be performed from the application
that is started up at the present, the machine starts the quick control
operation.
2
Teaching
If a teaching operation can be performed from the application that is
stated up at the present, the machine starts teaching.
3
Trace
If a tracking operation can be performed from the application that is
started up at the present, the machine starts trac
king control
operation.
4
LANG
(Language
selection)
This icon switches the displayed languages in real time.
5
M (Maintenance
information)
This icon displays the component replacement information screen.
If the machine has anything to notify an operator, a warning mark is
displayed above the icon.
6
LOG
(Getting a log)
This icon allows you to receive a log.
Some buttons may not be selected depending on the application that is being started up.
Part 1 Basic Operation Chapter 1 Overview of the Machine
1-68
(2) Function buttons displayed in the Information area
The function buttons are allocated in the Information area as shown below, and you can use
them by switching the tab.
No. Icon Name Overview
1
Maintenance tab
Displays the menu showing the various types of
maintenance information.
2
Application shortcut tab Displays the application shortcut keys and the “Exit”
menu.
3
Keyboard tab Displays the software keyboard.
Some tabs may not be selected depending on the application that is being started up.