RS-1_instruction manual.pdf - 第603页
Part 1 B asic O peration Chapter 4 Cr eating a Produc tion Progra m 4- 268 How to retur n a compone nt varies depe nding on the packagi ng style of a co mponent. When the size of a c omponent is 1 mm or less, the syst em…
Part 1 Basic Operation Chapter 4 Creating a Production Program
4-267
To abort teaching forcibly, press the <STOP> button. The following message appears on
the screen. Select whether to finish measurement or not.
When a component is picked up manually, the message that prompts you to pick it up
appears on the screen.
When a component is picked up with your hands successfully, the following dialog box
appears on the screen.
Part 1 Basic Operation Chapter 4 Creating a Production Program
4-268
How to return a component varies depending on the packaging style of a component.
When the size of a component is 1 mm or less, the system displays the message that allows
you to select whether to return it or discard it after measuring it.
When a component is returned manually, the following message appears on the screen.
Remove the component from the nozzle manually
Part 1 Basic Operation Chapter 4 Creating a Production Program
4-269
(3) Operating method for each teaching processing
① Component measurement
When you select "Component height" or "Pick vacuum pressure" in the measurement items
on the setting dialog box, component measurement is executed. When you press the
<Next> button in the "Start" status, component measurement is performed. After
completion of the measurement, values are displayed in the “After Meas.” field of the “Result
of measurement” column.
② Light Set
Set the VCS lighting type to be used for component measurement and adjust the brightness.
After component measurement is performed or when component measurement is not
performed, it is executed after a start. Adjust the brightness so that the pole, lead, and
outline of a component can be recognized.
a) Select the VCS light type in the “Light category” list box and the “Light type” list box.
b) Specify whether to use each light unit or not and its brightness (20 to 200).
c) The values of Pattern 1 to Pattern 4 can be saved. Select a pattern to be used by the
corresponding tab.
d) After completion of lighting setting, press the <Next> button to proceed to inclination
teaching.