RS-1_instruction manual.pdf - 第208页
Part 1 B asic O peration Chapter 2 Pr oduction 2- 97 In this case, t he taught val ue i s to be ent ered in both fiel ds, X and Y at t he same time regardless of the posit i on of t he input focus, i n the “X” fiel d or …
Part 1 Basic Operation Chapter 2 Production
2-96
(2) Transport path operation state
① When the <Pwb load> button is selected
A board is loaded to the buffer that clamps it, and then clamped.
The clamping position varies depending on the Setup setting or the external size of a
board.
If any board is already located at the clamping position, a new board is loaded after
the board at the clamping position is ejected.
② When the <Pwb load (2nd)> button is selected
A board is clamped for the second time.
Make the clamp using the HMS.
③ When the <Pwb eject> button is selected
A board is ejected from the clamping position.
④ When the <Unclamp PWB> button is selected
If any board is clamped, it is released.
⑤ When the <Reclamp> button is selected
If a board is located at the clamping position, the machine clamps it again.
⑥ When the <Reclamp (2 steps)> button is selected
When the board is in the clamping position, perform reclamping operation using HMS
and clamp the board.
Mark Data Teaching
When you select this button, the system displays the BOC marks and area marks of the specified
station to allow you check them.
(1) Operation
① Setting Circuit
Set a circuit on which the system recognizes a BOC mark or an area mark.
For the reference circuit only, you can select whether the system is to recognize
marks on all circuits or the specified circuit only.
② BOC Marks
You can instruct the system to teach each BOC mark position.
To teach the mark actually, use the <Teaching> button of the function bar.
Part 1 Basic Operation Chapter 2 Production
2-97
In this case, the taught value is to be entered in both fields, X and Y at the same time
regardless of the position of the input focus, in the “X” field or the “Y” field.
③ Area Marks
You can instruct the system to teach each area mark position. To teach the mark
actually, use the <Teaching> button of the function bar. In this case, the taught value
is to be entered in both fields, X and Y, at the same time regardless of the position of
the input focus, in the “X” field or the “Y” field.
Specify the area mark number in the “Mark Number” field.
④ PWB Info.
The system displays the board transport direction, the stopper position, the layout end,
the board reference position and the BOC mark positions.
⑤ <Recognize BOC Marks> button
The system recognizes BOC marks under the conditions you set.
If mark data is completed temporarily, the system automatically teaches marks, and
creates mark data completely.
See Section 4.3.3.3 “Mark: BOC” of Chapter 4 “Creating a Production Program” for
details.
⑥ < Recognize Area Marks> button
The system recognizes area marks under the conditions you set.
If mark data is completed temporarily, the system automatically teaches marks, and
creates mark data completely.
See Section 4.5.6.2 “Area mark” of Chapter 5 “Creating a Production Program” for
details.
⑦ <Conveyor Control> button
This button controls transporting of a board.
See Section 9.4.1 “Control item: PWB load” of Chapter 9 “Manual Control” for details.
Part 1 Basic Operation Chapter 2 Production
2-98
Teach Bad Mark Reader
This button allows you to make settings of recognition of a bad mark with the OCC.
See Section 8.3.6.2 “Bad mark sensor threshold” of Chapter 8 “Machine Setup” for details.
MTS mark recognition
This button causes the machine to recognize a mark of the MTS automatically.
See Section 4.5.6.3 “Feeder bank mark” of Chapter 4 “Creating a Production Program” for details.
Feeder Setup
This button displays the feeder layout of each bank to allow you to teach and/or track the
component pick-up position.
Only feeders specified with the menu item “Tracking order” on the “Pick position tracking” screen
(see Section 4.5.6.5 “Pick position/Pick height”) are to be traced.
When you press the “Teaching” button displayed in the Operation area, it allows the system to teach
the pick-up position of the selected component.
When you press the “Trace” button displayed in the Operation area, it allows the system to track a
component pick-up operation on the selected bank in the manner selected with the “Tracking”
button, <Automatic> or <Manual>.