RS-1_instruction manual.pdf - 第1013页

Part 2 D etaile d Descript ion of E ach Functi on Chapter 12 Handling th e Optional Device s 12 - 129 12.17.5 Machi ne Information 12.17.5.1 Nozzle Usage Information The nozzle u sage informa tion is mana ged with A TC n…

Part 2 Detailed Description of Each Function Chapter 12 Handling the Optional Devices

12-128

12.17.4 Machine Setup

Select the commands [Setting] – [Machine Setup] from the menu to open the “Machine Setup”

screen. Select the commands [Nozzle] – [Nozzle setup], and then allocate the selected nozzle(s)

or automatically allocate nozzles. After nozzles are allocated, the corresponding RFIDs are read.

You can check the nozzle allocated to each ATC hole and the corresponding RFID on the nozzle

information dialog box displayed when you press the <Nozzle ID> button.

When you press the <Save nozzle operation information file> button on the “Nozzle ID” dialog box,

you can display the dialog box for saving a nozzle operation information file on the screen. (See

Section 1.9.6 “Get and Save Machine Data.”)

Part 2 Detailed Description of Each Function Chapter 12 Handling the Optional Devices

12-129

12.17.5 Machine Information

12.17.5.1 Nozzle Usage Information

The nozzle usage information is managed with ATC numbers and nozzle numbers. When you set

an RFID of a nozzle to be used, the “Nozzle Usage Information” is displayed as shown below.

When a nozzle is associated with a nozzle ID, the nozzle ID is displayed also.

Part 2 Detailed Description of Each Function Chapter 12 Handling the Optional Devices

12-130

12.17.6 Limitations of the individual nozzle management system (RFID)

12.17.6.1 Associates an RFID with nozzle operation information

The system associates an RFID with nozzle operation information only when it performs the

following operations. When it performs any other operation, it does not associate an RFID with

nozzle operation information.

① Machine Setup > Nozzle setup

② Return-to-origin > Semi-auto Nozzle Return (applicable only when a nozzle is returned to an

empty ATC hole, and not applicable when it is returned manually.)

③ Production > Plan Support > Nozzle Setup Assistant: When you execute the <Rearrangement

of nozzles> button

When you manually replace a nozzle with another one, be sure to allocate nozzles. If you

do not allocate nozzles, the system does not associate an RFID of each nozzle with nozzle

operation information again.

12.17.6.2 When you replace a nozzle having an RFID with a nozzle not having an RFID

When you replace a nozzle having an RFID with a nozzle not having an RFID, and then perform

nozzle allocation, the system associates the RFID with nozzle operation information on a nozzle

having it only.

12.17.6.3 When you manually attach a nozzle on the machine

The shape of a nozzle that has to be attached on the machine manually is circular, and the nozzle

interferes with the antenna when the antenna reads the RFID. Therefore, the system does not

recognize/associate any RFID with the nozzle operation information.

12.17.6.4 If a nozzle ID is shifted as a result of semi-automatic nozzle return operation

By detecting a nozzle ID with semi-automatic nozzle return operation, you can check the nozzle

returning position. For example, if any other nozzle is already set at the retuning position when

semi-automatic nozzle return operation is performed, the nozzle returning destination may change.

In such a case, the corresponding nozzle ID is shifted, and the different nozzle is set at the position

at which the specified nozzle should be located. Therefore, the system cannot use this nozzle

based on the nozzle allocation.

Then, the following message appears on the screen. If any nozzle is moved by semi-automatic

nozzle return operation, allocate the nozzle again.