RS-1_instruction manual.pdf - 第748页
Part 2 D etaile d Descript ion of E ach Functi on Chapter 8 Machine Set up 8- 40 Head height setting When you se lect [Head h eight sett ing], the scree n shown below wil l appear . ( 1) Se tting items No. It em Descript…
Part 2 Detailed Description of Each Function Chapter 8 Machine Setup
8-39
Pre-pick feed setting
When you select “Pre-pick feed setting”, the following screen appears.
When “Pre-pick feed” of “Production – Others” in operation options is enabled, set the parameters
related to the pre-pick feed setting for each feeder type.
(1) Setting items
No.
Item
Description
1
Electric feeder
- RF 4 mm /
- RF 8 mm / E 8 mm S
- RF / E 12 mm
- RF / E 16 mm
- RF / E 24 mm
- RF / E 32 mm
- RF / E 44 mm
- RF / E 56 mm
- RF / E 72 mm
- RF / E 88 mm
Set a feeder type for a pre-pick feed.
(2) How to set
1) Select a feeder type for a pre-pick feeder by check box.
Part 2 Detailed Description of Each Function Chapter 8 Machine Setup
8-40
Head height setting
When you select [Head height setting], the screen shown below will appear.
(1) Setting items
No. Item Description
1
Head height before a
production start
Set a height that allows the head to move down during
production.
The head (ZA-axis) move to a height higher than the height
you have set in this setting item, and then the production starts.
(2) How to set
1) Enter a height value in the edit box directly.
Part 2 Detailed Description of Each Function Chapter 8 Machine Setup
8-41
Bad mark information setting
The bad mark information can be set when the bad mark propagation is effective. After the bad
mark information setting is selected, the following screen is displayed.
(1) Setting items
No.
Item
Description
1
Upload Check it off for the case of the upload mounter.
2
Manual input function
at occurrence of PWB
code read error
When a PWB code reading results in an error, check off this
item so that the manual input can be performed on the
temporary stop screen.
(2) How to set
1) Select each item by radio button.