FUJI错误代码查询.pdf - 第103页
Display: Used by: Cause: The tray thickness has not been specified. This error refers to device numbers 301 to 500. Remedy: Input correct data into the 25.(Tray:)Rack_pitch item in Part data's Package_and_appearance…
------------------------------
Code: 1101D084
Display:
Used by: IP3
Cause: Parts arranged in the tray have no entry for Cavities_x. This error refers to device numbers 101 to
300.
Remedy: Input correct values in 16.(Tray:)Cavities_x in Part data's Package_and_appearance_data.
------------------------------
Code: 1101D085
Display:
Used by:
Cause: Parts arranged in the tray have no entry for Cavities_x. This error refers to device numbers 301 to
500.
Remedy: Input correct values in 16.(Tray:)Cavities_x in Part data's Package_and_appearance_data.
------------------------------
Code: 1101D086
Display:
Used by: IP3
Cause: Parts arranged in the tray have no entry for Cavities_y. This error refers to device numbers 101 to
300.
Remedy: Input correct values in 17.(Tray:)Cavities_y in Part data's Package_and_appearance_data.
------------------------------
Code: 1101D087
Display:
Used by:
Cause: Parts arranged in the tray have no entry for Cavities_y. This error refers to device numbers 301 to
500.
Remedy: Input correct values in 17.(Tray:)Cavities_y in Part data's Package_and_appearance_data.
------------------------------
Code: 1101D088
Display:
Used by: IP3
Cause: The tray thickness has not been specified. This error refers to device numbers 101 to 300.
Remedy: Input correct data into the 24.(Tray:)Tray_thickness_x item in Part data's
Package_and_appearance_data.
------------------------------
Code: 1101D089
Display:
Used by:
Cause: The tray thickness has not been specified. This error refers to device numbers 301 to 500.
Remedy: Input correct data into the 24.(Tray:)Tray_thickness_x item in Part data's
Package_and_appearance_data.
------------------------------
Code: 1101D08A
Display:
Used by: IP3
Cause: The magazine rack pitch has not been specified. This error refers to device numbers 101 to 300.
Remedy: Input correct data into the 25.(Tray:)Rack_pitch item in Part data's
Package_and_appearance_data.
------------------------------
Code: 1101D08B
第 102 页
Display:
Used by:
Cause: The tray thickness has not been specified. This error refers to device numbers 301 to 500.
Remedy: Input correct data into the 25.(Tray:)Rack_pitch item in Part data's
Package_and_appearance_data.
------------------------------
Code: 1101D08C
Display:
Used by: IP3
Cause: The tray thickness is larger than the magazine rack pitch. This error refers to device numbers
101 to 300.
Remedy: Input correct data into the 24.(Tray:)Tray_thickness_x and 25.(Tray:)Rack_pitch items in Part
data's Package_and_appearance_data.
------------------------------
Code: 1101D08D
Display:
Used by:
Cause: The tray thickness is larger than the magazine rack pitch. This error refers to device numbers
301 to 500.
Remedy: Input correct data into the 24.(Tray:)Tray_thickness_x and 25.(Tray:)Rack_pitch items in Part
data's Package_and_appearance_data.
------------------------------
Code: 1101D08E
Display:
Used by: IP3
Cause: The number of steps in the magazine rack has not been specified. This error refers to device
numbers 101 to 300.
Remedy: Input correct data into the 26.(Tray)Rack_steps item in Part data's
Package_and_appearance_data.
------------------------------
Code: 1101D08F
Display:
Used by:
Cause: The number of steps in the magazine rack has not been specified. This error refers to device
numbers 301 to 500.
Remedy: Input correct data into the 26.(Tray)Rack_steps item in Part data's
Package_and_appearance_data.
------------------------------
Code: 1101D090
Display:
Used by: IP3
Cause: A pickup point from which to pick an empty tray (to be ejected) has not been specified. This
applies to sequences 101 to 300.
Remedy: Check the setting in Package_and_appearance_data's 21.(Tray:)Tray_pickup_pnt_x.
------------------------------
Code: 1101D091
Display:
Used by:
Cause: A pickup point from which to pick an empty tray (to be ejected) has not been specified. This
applies to sequences 301 to 500.
Remedy: Check the setting in Package_and_appearance_data's 21.(Tray:)Tray_pickup_pnt_x.
第 103 页
------------------------------
Code: 1101D092
Display:
Used by: IP3
Cause: A pickup point from which to pick an empty tray (to be ejected) has not been specified. This
applies to sequences 101 to 300.
Remedy: Check the setting in Package_and_appearance_data's 21.(Tray:)Tray_pickup_pnt_y.
------------------------------
Code: 1101D093
Display:
Used by:
Cause: A pickup point from which to pick an empty tray (to be ejected) has not been specified. This
applies to sequences 301 to 500.
Remedy: Check the setting in Package_and_appearance_data's 21.(Tray:)Tray_pickup_pnt_y.
------------------------------
Code: 1101D094
Display:
Used by: IP3
Cause: The vision processing system's vision type has not been specified. This applies to sequences 1 to
50.
Remedy: Check Part data's Vision_data 14.Vision_type.
------------------------------
Code: 1101D095
Display:
Used by:
Cause: The vision processing system's vision type has not been specified. This applies to sequences 51
to 100.
Remedy: Check Part data's Vision_data 14.Vision_type.
------------------------------
Code: 1101D096
Display:
Used by:
Cause: The vision processing system's vision type has not been specified. This applies to sequences 101
to 300.
Remedy: Check Part data's Vision_data 14.Vision_type.
------------------------------
Code: 1101D097
Display:
Used by:
Cause: The vision processing system's vision type has not been specified. This applies to sequences 301
to 500.
Remedy: Check Part data's Vision_data 14.Vision_type.
------------------------------
Code: 1101D098
Display: 1101D098
Used by: IP3
Cause: The length of the pin on the bottom of the part for which flux is to be applied has been specified
in Alignment_pin_length. This error has occurred because of the risk of interference during the flux
application, between the bottom of the flux receptacle and the pin on the bottom of the part.
Remedy: After correcting the part data item in question, transmit the production program again.
------------------------------
第 104 页