FUJI错误代码查询.pdf - 第1963页
Code: 2100773A Display: Not get Occupancy data Used by: Cause: Unable to read the information. Remedy: Re-install the software. ------------------------------ Code: 2100773B Display: Not get Slot info data Used by: Cause…
Remedy: Check the PST file device number.
------------------------------
Code: 21007732
Display: Cartridge type unmatch
Used by:
Cause: The feeder type is incorrect.
Remedy: Check the feeder type.
------------------------------
Code: 21007733
Display: No used Cartridge
Used by:
Cause: An unused feeder exists.
Remedy: Check the file.
------------------------------
Code: 21007734
Display: Can not setting Fix device data
Used by:
Cause: Unable to set the fixed device number.
Remedy: Check the PST file device number.
------------------------------
Code: 21007735
Display: Can not setting Next device data
Used by:
Cause: As there are too many devices in use, the next device cannot be set.
Remedy: Reduce the number of devices in use.
------------------------------
Code: 21007736
Display: Next device change station
Used by:
Cause: The next device is on a different pallet from the original device.
Remedy: This message occurs when the next device is on a different pallet from the original device. Set
the next device on the same pallet.
------------------------------
Code: 21007737
Display: Not found next device
Used by:
Cause: The next device was not found.
Remedy: This warning message appears when there is no next device specified in the program.
------------------------------
Code: 21007738
Display: Not get Cartridge name
Used by:
Cause: Unable to retrieve the feeder name.
Remedy: Check that the Part data has been entered correctly.
------------------------------
Code: 21007739
Display: Station over
Used by:
Cause: The device cannot be placed in the station.
Remedy: Join the feeders. Alternately, stop using the PST or the base program.
------------------------------
第 1962 页
Code: 2100773A
Display: Not get Occupancy data
Used by:
Cause: Unable to read the information.
Remedy: Re-install the software.
------------------------------
Code: 2100773B
Display: Not get Slot info data
Used by:
Cause: Unable to read the information.
Remedy: Re-install the software.
------------------------------
Code: 2100773C
Display: New production file has no sequence
Used by:
Cause: There are no sequences in the new program file.
Remedy: Check the input file.
------------------------------
Code: 2100773D
Display: Parts height regulation over
Used by:
Cause: The part height exceeds the set limit.
Remedy: Check the Part data part height.
------------------------------
Code: 2100773E
Display: Different cartridge name in PST file
Used by:
Cause: The feeder name in the PST file is wrong.
Remedy: Check the PST file feeder name.
------------------------------
Code: 2100773F
Display: Input program file name is too long
Used by:
Cause: The input program filename is too long.
Remedy: Check the filename.
------------------------------
Code: 21007740
Display: Output program file name is too long
Used by:
Cause: The output program filename is too long.
Remedy: Check the filename.
------------------------------
Code: 21007741
Display: Permanent Set Table name is too long
Used by:
Cause: The Permanent Set Table name is too long.
Remedy: Check the filename.
------------------------------
Code: 21007742
Display: Base program file name is too long
Used by:
第 1963 页
Cause: The base program filename is too long.
Remedy: Check the filename.
------------------------------
Code: 21007743
Display: Illegal format at Machine type table
Used by:
Cause: The machine type table format is illegal.
Remedy: Re-install the software.
------------------------------
Code: 21007744
Display: Make not mount sequence
Used by:
Cause: The queue data used in the strategy section of the system file could not be created.
Remedy: Re-boot MCS. If the error recurs, replace the MPU (memory) board.
------------------------------
Code: 21007745
Display: No entry Machine name
Used by:
Cause: The machine entered in the "Type" heading in "Sep_data" could not be found.
Remedy: Input the correct machine name under the "Type" (do not forget to also input "Time" and
"Device_Name") heading.
------------------------------
Code: 21007746
Display: Cam_table file open error
Used by:
Cause: The system file could not be opened.
Remedy: Re-install the Automatic Programming software.
------------------------------
Code: 21007747
Display: Cam_table file read error
Used by:
Cause: The system file could not be read.
Remedy: Re-install the Automatic Programming software.
------------------------------
Code: 21007748
Display: Cam_table file seek error
Used by:
Cause: The seek function did not work on the system file.
Remedy: Re-install the Automatic Programming software.
------------------------------
Code: 21007749
Display: Cam_table file path read error
Used by:
Cause: The input path could not be specified.
Remedy: Re-boot MCS. If the error recurs, re-install the software.
------------------------------
Code: 2100774A
Display: Not get cycle time
Used by:
Cause: Management time could not be calculated.
Remedy: Re-install the Automatic Programming software.
第 1964 页