FUJI错误代码查询.pdf - 第7页
Code: 11010304 Display: VF Data Er 0002 D No. *** Used by: QP242,QP201,QP202,QP203 Cause: Index number is out of designated range. Remedy: Check device number ***. ------------------------------ Code: 11010305 Display: V…
Remedy: The magazine number must be between 1 and 4. Check the production program.
------------------------------
Code: 11010206
Display:
Used by: QP242,QP201,QP202,QP203
Cause: An inappropriate device number has been specified for the tape pack feeder.
Remedy: The device number must be between 1 and 37 or 51 and 87.
Check the production program.
------------------------------
Code: 11010207
Display:
Used by: QP242,QP201,QP202,QP203
Cause: An inappropriate reference device number has been specified for the tape pack feeder.
Remedy: The reference device number must be between 5 and 33, or 55 and 83.
Check the production program.
------------------------------
Code: 11010208
Display: Head number setting error
Used by: NP133,NP134,NP153
Cause: There is an error in the head numbers specified in sequence data.
Remedy: If head specifications are not made, all sequences should be set to "0". When head specifications
are required, a head number (1-16) should be set for every sequence.
------------------------------
Code: 11010301
Display: "PDG device_type ERROR D**" (IP)
Used by: IP1,QP242,QP201,QP202,QP203
Cause: The Part data indicating device type specifies either a tape feeder when a tray is being used, or a
tray when a tape feeder is being used.
The value replacing the "**" in the display is the device number.
Remedy: Correct the device type specification in the Part data. Set a value from 0 to 9 for Part data "35.
device type (MCS/1)", "3.
Package_type (MCS/2)" if a tray is being used, or a value other than 0 to 9 for Part data for "61. device
type (IP) (MCS/1)", "3.
Package_type (MCS/2)" if a tape feeder is being used. Refer to the MCS/2 Programming Manual for the
meanings of these values.
------------------------------
Code: 11010302
Display: "Can't use this device" (IP)
Used by: QP242,QP201,QP202,QP203
Cause: This error occurs when a device number from D111 to D120 is specified for an FIP machine
without an left tray, or when a device number from D101 to D110 is specified for an FIP machine withouta
right tray.
Remedy: Check the device numbers.
------------------------------
Code: 11010303
Display: "VF Data Er 0001 D No.***"
Used by: QP242,QP201,QP202,QP203
Cause: The resistance or capacity value for the indicated device includes two periods. The value replacing
the "***" in the display is the device number.
Remedy: Check the resistance and capacity values for the indicated device.
------------------------------
第 6 页
Code: 11010304
Display: VF Data Er 0002 D No. ***
Used by: QP242,QP201,QP202,QP203
Cause: Index number is out of designated range.
Remedy: Check device number ***.
------------------------------
Code: 11010305
Display: VF Data Er 0003 D No. ****
Used by: QP242,QP201,QP202,QP203
Cause: A character specifying part type is not part of the set of permissible characters.
Remedy: Check Device data No. ****.
------------------------------
Code: 11010306
Display: VF Data Er 0004 D No.***
Used by: QP242,QP201,QP202,QP203
Cause: When setting the authorized numerical range, setting was made outside the allowable limits.
Remedy: Check the device data for device number ***.
------------------------------
Code: 11010307
Display: VF Data Er 0005 D No. ***
Used by: QP242,QP201,QP202,QP203
Cause: When setting the authorized numerical range, setting was made outside the allowable limits.
Remedy: Check the device data at device number ***.
------------------------------
Code: 11010308
Display: VF Data Er 0006 D No. ***
Used by: QP242,QP201,QP202,QP203
Cause: Part category F is out of range.
Remedy: Check the F data item in device number ***.
------------------------------
Code: 11010309
Display: VF Data Er 0007 D No. ***
Used by: QP242,QP201,QP202,QP203
Cause: Part category H is out of range.
Remedy: Check the H data item in device number ***.
------------------------------
Code: 1101030A
Display: VF Data Er 0008 D No. ***
Used by: QP242,QP201,QP202,QP203
Cause: Part category R is out of range.
Remedy: Check the R data item in device number ***.
------------------------------
Code: 1101030B
Display: VF Data Er 0009 D No. ***
Used by: QP242,QP201,QP202,QP203
Cause: There is no final "/" (slash).
Remedy: Check the F data item in device number ***.
------------------------------
Code: 1101030C
Display: Error: Nozzle No.
Used by: IP2,QP242,QP201,QP202,QP203
第 7 页
Cause: The nozzle designated in Part data is outside the accepted range of 0~3. On the IP-II, the nozzle
number is set incorrectly.
Remedy: Check the nozzle number in Part data. The system memory may have rejected the contents. In
this case, perform Reset- start.
On the IP-II, when nozzle 2 or 3 is being used, check the settings in the production program, as these
nozzles are fixed.
------------------------------
Code: 1101030D
Display: Cartridge type
Used by: IP2,QP242,QP201,QP202,QP203
Cause: An inoperative value has been entered as a feeder type in Part data
(IP2).
Remedy: After checking that the value is correct, re-transmit the production program.
------------------------------
Code: 11010310
Display: DVX11010310
Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643
Cause: The cam speed is not specified in Part data 001~013 (CP4).
Remedy: Check Part data items 001~013. Enter an appropriate cam speed.
------------------------------
Code: 11010311
Display: DVX11010311
Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643
Cause: The cam speed is not specified in Part data 014~026 (CP4).
Remedy: Check Part data items 014~026. Enter an appropriate cam speed.
------------------------------
Code: 11010312
Display: DVX11010312
Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643
Cause: The cam speed is not specified in Part data 027~039 (CP4).
Remedy: Check Part data items 027~039. Enter an appropriate cam speed.
------------------------------
Code: 11010313
Display: DVX11010313
Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643
Cause: The cam speed is not specified in Part data 040~052 (CP4).
Remedy: Check Part data items 040~052. Enter an appropriate cam speed.
------------------------------
Code: 11010314
Display: DVX11010314
Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643
Cause: The cam speed is not specified in Part data 053~065 (CP4).
Remedy: Check Part data items 053~065. Enter an appropriate cam speed.
------------------------------
Code: 11010315
Display: DVX11010315
Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643
Cause: The cam speed is not specified in Part data 066~078 (CP4).
Remedy: Check Part data items 066~078. Enter an appropriate cam speed.
------------------------------
Code: 11010316
第 8 页