FUJI错误代码查询.pdf - 第1515页

------------------------------ Code: 1D1D0011 Display: Same as code. Used by: Cause: The part's inclination is excessive. Remedy: Check the part supply direction. ------------------------------ Code: 1D1D0013 Displa…

Cause: A sufficient number of leads could not be found.

Remedy: Check the lead quantity and the part supply direction. Lead thickness is critical to lead

detection. Leads can be recognized if the actual lead thickness is within [p/m]50% of the value specified

in the Part data. A variety of errors may occur if this range is exceeded. Check the leads and the CCD

level.

------------------------------

Code: 1D1D000B

Display: Same as code.

Used by:

Cause: A lead is too wide.

Remedy: Check the lead width. Lead thickness is critical to lead detection. Leads can be recognized if the

actual lead thickness is within [p/m]50% of the value specified in the Part data. A variety of errors may

occur if this range is exceeded. Check the leads and the CCD level.

------------------------------

Code: 1D1D000C

Display: Same as code.

Used by:

Cause: A lead is too wide.

Remedy: Check the lead width. Lead thickness is critical to lead detection. Leads can be recognized if the

actual lead thickness is within [p/m]50% of the value specified in the Part data. A variety of errors may

occur if this range is exceeded. Check the leads and the CCD level.

------------------------------

Code: 1D1D000D

Display: Same as code.

Used by:

Cause: A lead is too long.

Remedy: Check the lead length and the part supply direction. Lead thickness is critical to lead detection.

Leads can be recognized if the actual lead thickness is within [p/m]50% of the value specified in the Part

data. A variety of errors may occur if this range is exceeded. Check the leads and the CCD level.

------------------------------

Code: 1D1D000E

Display: Same as code.

Used by:

Cause: A lead is too long.

Remedy: Check the lead length and the part supply direction. Lead thickness is critical to lead detection.

Leads can be recognized if the actual lead thickness is within [p/m]50% of the value specified in the Part

data. A variety of errors may occur if this range is exceeded. Check the leads and the CCD level.

------------------------------

Code: 1D1D000F

Display: Same as code.

Used by:

Cause: Processing error.

Remedy: Check the part's shape. Check for a missing part.

------------------------------

Code: 1D1D0010

Display: Same as code.

Used by:

Cause: The lead pitch is incorrect.

Remedy: Check the lead pitch and the lead quantity. Lead thickness is critical to lead detection. Leads

can be recognized if the actual lead thickness is within [p/m]50% of the value specified in the Part data. A

variety of errors may occur if this range is exceeded. Check the leads and the CCD level.

第 1514 页

------------------------------

Code: 1D1D0011

Display: Same as code.

Used by:

Cause: The part's inclination is excessive.

Remedy: Check the part supply direction.

------------------------------

Code: 1D1D0013

Display: Same as code.

Used by:

Cause: The lead quantity is set to 3, but only 2 leads could be found.

Remedy: Check the part's shape. Check the part supply direction. Check the Part data and the Device

data.

------------------------------

Code: 1D1D0014

Display: Same as code.

Used by:

Cause: The lead quantity is set to 2, but 3 leads were found.

Remedy: Check the part's shape. Check the part supply direction. Check the Part data and the Device

data.

------------------------------

Code: 1D1D8002

Display: Same as code.

Used by:

Cause: The machine failed to pick up a part. The nozzle being used is to large for the part. The part

cannot be identified in the vision processing image.

Remedy: Supply the part. If this error occurs even though a part has been picked up, use a smaller

nozzle for the part. Reduce the CCD level so that the part image becomes visible.

------------------------------

Code: 1D1D8100

Display: Same as code.

Used by:

Cause: This Computer Vision No. is not supported.

Remedy: Check the Computer Vision No. setting in the Part data.

------------------------------

Code: 1D1D8110

Display: Same as code

Used by:

Cause: No value has been set for the "Lead_pitch" parameter in the Part data.

Remedy: Set a value for the "Lead_pitch" parameter.

------------------------------

Code: 1D1D8111

Display: Same as code

Used by:

Cause: No value has been set for the "Lead_width" parameter in the Part data.

Remedy: Set a value for the "Lead_width" parameter.

------------------------------

Code: 1D1D8112

Display: Same as code

Used by:

Cause: No value has been set for the "Lead_length_x" parameter (the length of leads in the X direction) in

第 1515 页

the Part data.

Remedy: Set a value for the "Lead_length_x" parameter.

------------------------------

Code: 1D1D8113

Display: Same as code

Used by:

Cause: No value has been set for the "Lead_length_y" parameter (the length of leads in the Y direction) in

the Part data.

Remedy: Set a value for the "Lead_length_y" parameter.

------------------------------

Code: 1D1D8114

Display: Same as code

Used by:

Cause: No value has been set for the "Body_size 1" parameter (the body length in the X direction) in the

Part data.

Remedy: Set a value for the "Body_size 1" parameter.

------------------------------

Code: 1D1D8115

Display: Same as code

Used by:

Cause: No value has been set for the "Body_size 0" parameter (the body length in the X direction) in the

Part data.

Remedy: Set a value for the "Body_size 0" parameter.

------------------------------

Code: 1D1D8120

Display: Same as code

Used by:

Cause: No value has been set for the "Qty 0" parameter (the quantity of leads on the left side) in the Part

data.

Remedy: Set a value for the "Qty 0" parameter.

------------------------------

Code: 1D1D8121

Display: Same as code

Used by:

Cause: No value has been set for the "Qty 1" parameter (the quantity of leads on the lower side) in the

Part data.

Remedy: Set a value for the "Qty 1" parameter.

------------------------------

Code: 1D1D8122

Display: Same as code

Used by:

Cause: No value has been set for the "Qty 2" parameter (the quantity of leads on the right side) in the

Part data.

Remedy: Set a value for the "Qty 2" parameter.

------------------------------

Code: 1D1D8123

Display: Same as code

Used by:

Cause: No value has been set for the "Qty 3" parameter (the quantity of leads on the upper side) in the

Part data.

Remedy: Set a value for the "Qty 3" parameter.

第 1516 页