FUJI错误代码查询.pdf - 第2061页

Code: 2100C240 Display: Illegal unit (drive) number. Used by: Cause: An illegal device was specified. Remedy: Check the device. ------------------------------ Code: 2100C241 Display: Bad disk sector number Used by: Cause…

100%1 / 5282
Code: 2100C231
Display: Known Module
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C232
Display: Bad module CRC
Used by:
Cause: The executing module in the specified process cannot be found.
Remedy: Check thin MCS/2 has been properly installed. Perform module tests to try and find the root of
the problem.
------------------------------
Code: 2100C234
Display: Non Existing Module
Used by:
Cause: The executing module in the specified process cannot be found.
Remedy: Check that the MCS/2 has been properly installed. Perform module tests to try and find the
root of the problem.
------------------------------
Code: 2100C235
Display: Bad Name
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C236
Display: Bad module header parity
Used by:
Cause: The executing module in the specified process cannot be found.
Remedy: Check that the MCS/2 has been properly installed. Perform module tests to try and find the
root of the problem.
------------------------------
Code: 2100C237
Display: No RAM Available
Used by:
Cause: RAM memory to use the file cannot be saved.
Remedy: Allocate more memory.
------------------------------
Code: 2100C238
Display: The directory is not empty
Used by:
Cause: The directory was not emptied completely after an attempt was made to empty it.
Remedy: Except in cases where this was attempted by direct command, contact Fuji.
------------------------------
Code: 2100C239
Display: No available task number
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
第 2060 页
Code: 2100C240
Display: Illegal unit (drive) number.
Used by:
Cause: An illegal device was specified.
Remedy: Check the device.
------------------------------
Code: 2100C241
Display: Bad disk sector number
Used by:
Cause: A system error occurred.
Remedy: Change the disk, or format it and re-execute the function.
------------------------------
Code: 2100C242
Display: Media is write protected
Used by:
Cause: The specified device cannot be written to.
Remedy: If using a floppy disk, check the write protection tab on the disk. If not using a floppy, contact
Fuji.
------------------------------
Code: 2100C243
Display: Bad check sum
Used by:
Cause: A system error occurred.
Remedy: Check that the MCS/2 software was installed properly. Perform tests on the program module to
determine the roots of the problem. Check the file.
------------------------------
Code: 2100C244
Display: Read error
Used by:
Cause: The specified file could not be read.
Remedy: Check that the MCS software was installed properly. Perform tests on the program module to
determine the cause of the problem. Check the file.
------------------------------
Code: 2100C245
Display: Write error
Used by:
Cause: The specified file could not be written into.
Remedy: Check that the MCS software was properly installed. Perform tests on the program module to
determine the cause of the problem. Check the file.
------------------------------
Code: 2100C246
Display: Device not ready
Used by:
Cause: The specified device (floppy disk drive or printer) is not in the operating status.
Remedy: Make sure that the floppy disk drive lock lever is fully closed or that the printer is turned on and
set on-line.
------------------------------
Code: 2100C247
Display: Seek error
Used by:
Cause: A system error occurred.
第 2061 页
Remedy: Re-execute the function. If the error recurs, reset MCS.
------------------------------
Code: 2100C248
Display: Media full
Used by:
Cause: The specified disk has no space left.
Remedy: Delete unnecessary files, or if all files are needed, delete some after backing them up elsewhere.
------------------------------
Code: 2100C249
Display: Bad type (incompatible media)
Used by:
Cause: The specified media type is incompatible.
Remedy: Check the specified type.
------------------------------
Code: 2100C250
Display: Device busy
Used by:
Cause: A system error occurred.
Remedy: Re-execute the function after waiting a short while. If the error recurs, reset MCS.
------------------------------
Code: 2100C251
Display: Disk ID change
Used by:
Cause: A system error occurred.
Remedy: Re-execute the function after waiting a short while. If the error recurs, reset MCS.
------------------------------
Code: 2100C252
Display: Record is busy
Used by:
Cause: A system error occurred.
Remedy: Re-execute the function after waiting a short while. If the error recurs, reset MCS.
------------------------------
Code: 2100C253
Display: Disk ID change
Used by:
Cause: A system error occurred.
Remedy: Re-execute the function after waiting a short while. If the error recurs, reset MCS.
------------------------------
Code: 2100C254
Display: I/O Deadlock error
Used by:
Cause: A system error occurred.
Remedy: Re-execute the function after waiting a short while. If the error recurs, reset MCS.
------------------------------
Code: 2100C255
Display: Device is format protected
Used by:
Cause: The device cannot be formatted.
Remedy: Re-execute the function. If the error recurs, reset MCS. If the error still recurs, re-install the
software from OS-9.
------------------------------
第 2062 页