FUJI错误代码查询.pdf - 第35页
Cause: Holder number check error (sequences 0001~0125). Remedy: Check the holder numbers on sequences 0001~0125. On the IP2, there is a check to make sure that every sequence has a holder number assigned. If there is no …
Code: 11011327
Display: Non
Used by: CP642,CP642M,CP643
Cause: The No.1 nozzle in the nozzle assignment table is less than 0.7 mm in size.
Remedy: Use nozzle of less than 0.7 mm at a position other than No.1.
------------------------------
Code: 11011400
Display:
Used by: GL2,GL541
Cause: The application time (G) is out of range.
Remedy: Check the program.
------------------------------
Code: 11011401
Display:
Used by:
Cause: The application speed (U) is out of range.
Remedy: Check the program.
------------------------------
Code: 11011402
Display:
Used by:
Cause: The feeder specification (F) is not set at 1 or 2.
Remedy: Check the program.
------------------------------
Code: 11011403
Display:
Used by:
Cause: The feeder specification (F) change over on even numbered devices.
Remedy: Check the program.
------------------------------
Code: 11011404
Display:
Used by:
Cause: The DX offset is out of range.
Remedy: Check the program.
------------------------------
Code: 11011405
Display:
Used by:
Cause: The DY offset is out of range.
Remedy: Check the program.
------------------------------
Code: 11011406
Display:
Used by:
Cause: The DQ offset is out of range.
Remedy: Check the program.
------------------------------
Code: 11011600
Display:
Used by: IP2
第 34 页
Cause: Holder number check error (sequences 0001~0125).
Remedy: Check the holder numbers on sequences 0001~0125. On the IP2, there is a check to make sure
that every sequence has a holder number assigned. If there is no holder assigned to a sequence, an error
occurs.
------------------------------
Code: 11011601
Display:
Used by: IP2
Cause: Holder number check error (sequences 0126~0250).
Remedy: Check the holder numbers on sequences 0126~0250. On the IP2, there is a check to make sure
that every sequence has a holder number assigned. If there is no holder assigned to a sequence, an error
occurs.
------------------------------
Code: 11011602
Display:
Used by: IP2
Cause: Holder number check error (sequences 0251~0375).
Remedy: Check the holder numbers on sequences 0251~0375. On the IP2, there is a check to make sure
that every sequence has a holder number assigned. If there is no holder assigned to a sequence, an error
occurs.
------------------------------
Code: 11011603
Display:
Used by: IP2
Cause: Holder number check error (sequences 0376~0500).
Remedy: Check the holder numbers on sequences 0376~0500. On the IP2, there is a check to make sure
that every sequence has a holder number assigned. If there is no holder assigned to a sequence, an error
occurs.
------------------------------
Code: 11011604
Display:
Used by: IP2
Cause: Holder number check error (sequences 0501~0625).
Remedy: Check the holder numbers on sequences 0501~0625. On the IP2, there is a check to make sure
that every sequence has a holder number assigned. If there is no holder assigned to a sequence, an error
occurs.
------------------------------
Code: 11011605
Display:
Used by: IP2
Cause: Holder number check error (sequences 0626~0750).
Remedy: Check the holder numbers on sequences 0626~0750. On the IP2, there is a check to make sure
that every sequence has a holder number assigned. If there is no holder assigned to a sequence, an error
occurs.
------------------------------
Code: 11011606
Display:
Used by: IP2
Cause: Holder number check error (sequences 0751~0875).
Remedy: Check the holder numbers on sequences 0751~0875. On the IP2, there is a check to make sure
that every sequence has a holder number assigned. If there is no holder assigned to a sequence, an error
第 35 页
occurs.
------------------------------
Code: 11011607
Display:
Used by: IP2
Cause: Holder number check error (sequences 0876~1000).
Remedy: Check the holder numbers on sequences 0876~1000. On the IP2, there is a check to make sure
that every sequence has a holder number assigned. If there is no holder assigned to a sequence, an error
occurs.
------------------------------
Code: 11011608
Display:
Used by: IP2
Cause: Holder number check error (sequences 1001~1125).
Remedy: Check the holder numbers on sequences 1001~1125. On the IP2, there is a check to make sure
that every sequence has a holder number assigned. If there is no holder assigned to a sequence, an error
occurs.
------------------------------
Code: 11011609
Display:
Used by: IP2
Cause: Holder number check error (sequences 1126~1250).
Remedy: Check the holder numbers on sequences 1126~1250. On the IP2, there is a check to make sure
that every sequence has a holder number assigned. If there is no holder assigned to a sequence, an error
occurs.
------------------------------
Code: 1101160A
Display:
Used by: IP2
Cause: Holder number check error (sequences 1251~1375).
Remedy: Check the holder numbers on sequences 1251~1375. On the IP2, there is a check to make sure
that every sequence has a holder number assigned. If there is no holder assigned to a sequence, an error
occurs.
------------------------------
Code: 1101160B
Display:
Used by: IP2
Cause: Holder number check error (sequences 1376~1500).
Remedy: Check the holder numbers on sequences 1376~1500. On the IP2, there is a check to make sure
that every sequence has a holder number assigned. If there is no holder assigned to a sequence, an error
occurs.
------------------------------
Code: 1101160C
Display:
Used by: IP2
Cause: Holder number check error (sequences 1501~1625).
Remedy: Check the holder numbers on sequences 1501~1625. On the IP2, there is a check to make sure
that every sequence has a holder number assigned. If there is no holder assigned to a sequence, an error
occurs.
------------------------------
Code: 1101160D
第 36 页