FUJI错误代码查询.pdf - 第2090页
------------------------------ Code: 2100ED11 Display: Used by: Cause: The MCS/1 Part Sort table could not be opened. Remedy: Check that the file exists. ------------------------------ Code: 2100ED12 Display: Used by: Ca…
Cause: The Translator could not be started up.
Remedy: Re-install the software.
------------------------------
Code: 2100ED09
Display:
Used by:
Cause: The directory function could not be started up.
Remedy: Check that the directory can display. If it can't, re-boot MCS and try again. If the error recurs,
re-install the OS-9 software.
------------------------------
Code: 2100ED0A
Display:
Used by:
Cause: The input file directory could not be opened.
Remedy: Check the directory.
------------------------------
Code: 2100ED0B
Display:
Used by:
Cause: The input file for the Translator does not exist.
Remedy: Correct the name of the Translator input file.
------------------------------
Code: 2100ED0C
Display:
Used by:
Cause: Incorrect input file directory.
Remedy: Correct the directory configuration.
------------------------------
Code: 2100ED0D
Display:
Used by:
Cause: A device other than the hard disk (H0) or floppy disk (D0) was specified.
Remedy: Specify the device correctly.
------------------------------
Code: 2100ED0E
Display:
Used by:
Cause: The named pipe for the directory could not be opened.
Remedy: Re-boot MCS.
------------------------------
Code: 2100ED0F
Display:
Used by:
Cause: Incorrect output file directory.
Remedy: Correct the directory configuration.
------------------------------
Code: 2100ED10
Display:
Used by:
Cause: The temporary directory for displaying Part data could not be created.
Remedy: Re-boot MCS.
第 2089 页
------------------------------
Code: 2100ED11
Display:
Used by:
Cause: The MCS/1 Part Sort table could not be opened.
Remedy: Check that the file exists.
------------------------------
Code: 2100ED12
Display:
Used by:
Cause: The printer output event could not be linked.
Remedy: Re-boot MCS.
------------------------------
Code: 2100ED13
Display:
Used by:
Cause: A stop command could not be set to the printer output event.
Remedy: Re-execute the function.
------------------------------
Code: 2100ED14
Display:
Used by:
Cause: The name of the input file has not been specified.
Remedy: Specify the name of the file.
------------------------------
Code: 2100ED15
Display:
Used by:
Cause: The name of the output file has not been specified.
Remedy: Specify the name of the file.
------------------------------
Code: 2100ED16
Display:
Used by:
Cause: The temporary file for translation could not be created.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100ED17
Display:
Used by:
Cause: Data could not be written to the temporary file for translation.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100ED18
Display:
Used by:
Cause: The temporary file for translation could not be opened.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100ED19
Display:
第 2090 页
Used by:
Cause: The temporary file for translation could not be read.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100ED1A
Display:
Used by:
Cause: The input file for translation could not be opened.
Remedy: Check the file, and then re-execute the function.
------------------------------
Code: 2100ED1B
Display:
Used by:
Cause: The input file directory for translation is not correct.
Remedy: Check the file directory with the Directory function.
------------------------------
Code: 2100ED1C
Display:
Used by:
Cause: The floppy disk drive cannot operate.
Remedy: Make sure that the floppy disk drive lock lever is fully closed.
------------------------------
Code: 2100ED1D
Display:
Used by:
Cause: The system command (Dir) could not be used.
Remedy: Re-install the OS-9.
------------------------------
Code: 2100ED1E
Display:
Used by:
Cause: A module does not exist.
Remedy: Re-install the software.
------------------------------
Code: 2100ED1F
Display:
Used by:
Cause: The temporary translate file could not copy.
Remedy: Re-execute the function. If the error recurs, re-install the software.
------------------------------
Code: 2100ED20
Display:
Used by:
Cause: The input filename is not formatted correctly.
Remedy: Input a correct filename.
------------------------------
Code: 2100ED21
Display:
Used by:
Cause: The output filename is not formatted properly.
Remedy: Correct the output filename.
第 2091 页