FUJI错误代码查询.pdf - 第1343页
------------------------------ Code: 1D0B400B Display: Used by: Cause: The lead is too long. Remedy: Check the part size, and check that the vision processing system is working correctly (check the image). --------------…
Used by:
Cause: A Part data entry is missing.
Remedy: Check Part data.
------------------------------
Code: 1D0B4004
Display:
Used by:
Cause: A Part data entry is missing.
Remedy: Check Part data.
------------------------------
Code: 1D0B4005
Display:
Used by:
Cause: The Y direction is too long.
Remedy: Check the part, and check that the vision processing system is working correctly (check the
image).
------------------------------
Code: 1D0B4006
Display:
Used by:
Cause: The upper and lower area could not be found.
Remedy: Check the lead width, the lead length and check that the vision processing system is working
correctly (check the image).
------------------------------
Code: 1D0B4007
Display:
Used by:
Cause: The upper and lower area could not be found.
Remedy: Check the lead width, the lead length and check that the vision processing system is working
correctly (check the image).
------------------------------
Code: 1D0B4008
Display:
Used by:
Cause: The lead is too long.
Remedy: Check the part size, and check that the vision processing system is working correctly (check the
image).
------------------------------
Code: 1D0B4009
Display:
Used by:
Cause: The lead is too long.
Remedy: Check the part size, and check that the vision processing system is working correctly (check the
image).
------------------------------
Code: 1D0B400A
Display:
Used by:
Cause: The Y direction is too long.
Remedy: Check the part size, and check that the vision processing system is working correctly (check the
image).
第 1342 页
------------------------------
Code: 1D0B400B
Display:
Used by:
Cause: The lead is too long.
Remedy: Check the part size, and check that the vision processing system is working correctly (check the
image).
------------------------------
Code: 1D0B400C
Display:
Used by:
Cause: The lead is too long.
Remedy: Check the part size, and check that the vision processing system is working correctly (check the
image).
------------------------------
Code: 1D0B400E
Display:
Used by:
Cause: The shape of the lead cannot be checked.
Remedy: Check that the vision processing system is working correctly (check the image), and check the
lead length.
------------------------------
Code: 1D0B400F
Display:
Used by:
Cause: The shape of the lead cannot be checked.
Remedy: Check that the vision processing system is working correctly (check the image), and check the
lead length.
------------------------------
Code: 1D0B4010
Display:
Used by:
Cause: The shape of the lead cannot be checked.
Remedy: Check that the vision processing system is working correctly (check the image), and check the
lead length.
------------------------------
Code: 1D0B4011
Display:
Used by:
Cause: The shape of the lead cannot be checked.
Remedy: Check that the vision processing system is working correctly (check the image), and check the
lead length.
------------------------------
Code: 1D0B4012
Display:
Used by:
Cause: The part is tilted too much.
Remedy: Check that the CCD level and vision processing is operating normally.
------------------------------
Code: 1D0B4014
Display:
第 1343 页
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D0B4015
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D0B4016
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D0B4017
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D0B8002
Display:
Used by:
Cause: The part was not picked. The nozzle used with this part is too large. Vision processing could not
detect any part.
Remedy: Re-supply parts. If parts were picked and this error occurred, make the nozzle smaller. Lower
the CCD level so that parts can be detected.
------------------------------
Code: 1D0B8100
Display:
Used by:
Cause: This Computer Vision No. is not supported.
Remedy: Check the Computer Vision No. in Part Data.
------------------------------
Code: 1D0B8110
Display:
Used by:
Cause: Lead_pitch (pitch between the lead spaces) in Part data has not been specified.
Remedy: Specify Lead_pitch in Part data.
------------------------------
Code: 1D0B8111
第 1344 页