FUJI错误代码查询.pdf - 第1785页
Cause: A lead could not be detected on the upper side of the part. The two final digits indicate the lead number. Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device data…
------------------------------
Code: 1D66B5??
Display:
Used by:
Cause: There is no lead where there ought to be one on the right side of the part. The final two digits
indicate the lead number.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D66B6??
Display:
Used by:
Cause: There is a lead where there ought not to be one on the upper side of the part. The final two digits
indicate the lead number.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D66B7??
Display:
Used by:
Cause: There is no lead where there ought to be one on the upper side of the part. The final two digits
indicate the lead number.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D66C0??
Display:
Used by:
Cause: A lead could not be detected on the left side of the part.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D66C1??
Display:
Used by:
Cause: A lead could not be detected on the lower side of the part. The two final digits indicate the lead
number.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D66C2??
Display:
Used by:
Cause: A lead could not be detected on the right side of the part. The two final digits indicate the lead
number.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D66C3??
Display:
Used by:
第 1784 页
Cause: A lead could not be detected on the upper side of the part. The two final digits indicate the lead
number.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D66C4??
Display:
Used by:
Cause: An edge could not be detected on the left side of the part.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D66C5??
Display:
Used by:
Cause: An edge could not be detected on the lower side of the part.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D66C6??
Display:
Used by:
Cause: An edge could not be detected on the right side of the part.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D66C7??
Display:
Used by:
Cause: An edge could not be detected on the upper side of the part.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D66D000
Display:
Used by:
Cause: The part pickup slippage was too large (X direction).
Remedy: Check how the parts are being supplied.
------------------------------
Code: 1D66D080
Display:
Used by:
Cause: The part pickup slippage was too large (Y direction).
Remedy: Check how the parts are being supplied.
------------------------------
Code: 1D66E???
Display:
Used by:
Cause: The image in vision processing is not correct so operation was canceled.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
第 1785 页
------------------------------
Code: 1D66F???
Display:
Used by:
Cause: There was a logical error in the management program.
Remedy: Check Part data.
------------------------------
Code: 1D670001
Display:
Used by:
Cause: A range error occurred during vision processing.
Remedy: A range error occurs when a check is performed on a part but the check point is not on the
image. This could be caused by
1) a large part being picked incorrectly, resulting in an incomplete image;
2) an incorrect CCD level setting or broken nozzle, resulting in a bad image;
3) an incorrect value entered in Part data (PDG) so that vision processing could not be done;
4) the Proper values CCD_X and CCD_Y are incorrect, resulting in a bad image;
5) a problem with the vision processing system program. Check the above listed conditions.
------------------------------
Code: 1D670002
Display:
Used by:
Cause: The part could not be found.
Remedy: Check the condition of the part feeding system. Check the CCD level and the nozzle sizes
entered in Proper data. When using a 1608 part S nozzle (1.00 mm) check whether or not the normal size
(1.3 mm) is entered. If this is the case and a 1608 part is picked, vision processing might register this as
not a part. If the CCD level is too high, the image will be too dark, and vision processing might register
this as not a part.
------------------------------
Code: 1D670006
Display:
Used by:
Cause: The part was tilted more than 45 deg. and processing was therefore cancelled.
Remedy: Check that the picking conditions have not gone bad.
------------------------------
Code: 1D670007
Display:
Used by:
Cause: A range error occurred during vision processing.
Remedy: None.
------------------------------
Code: 1D670008
Display:
Used by:
Cause: The lead information in Part data (PDG) was checked, and there are not more than two leads on
the appropriate side.
Remedy: Check the following items in PDG: number of leads, lead information and the orientation of the
parts on the feeder.
------------------------------
Code: 1D670009
Display:
第 1786 页