FUJI错误代码查询.pdf - 第724页

------------------------------ Code: 12070?35 Display: "ICM(PMC?,SCU?) Error Code:********" (QP2) "Recovery Operation" (QP2) PM?? ERROR Code:******** (QP132) Used by: QP242,QP201,QP202,QP203,QP132 Cau…

100%1 / 5282
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The axis is not at the origin position.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12070?31
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"M/C Stop (Parts Runout)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The machine has stopped because it has run out of a component. This code is used in
notification between the PMC and the MC; it is never actually used in notification to the host computer.
(The host computer is notified of expended components using error code 12040104.)
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Supply components.
------------------------------
Code: 12070?32
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Improper XY Data" (QP2)
Used by: QP242,QP201,QP202,QP203
Cause: The command contains insufficient XY coordinate data.
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: This error should not occur under normal conditions.
------------------------------
Code: 12070?33
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: A RELEASE command was received even though the FREEZE command has not been received.
?? indicates the module number. **** indicates the command name in which the error occurred.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12070?34
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Servo Power ON" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The command could not be executed because the servo's power supply is on.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
第 723 页
------------------------------
Code: 12070?35
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Recovery Operation" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The machine is recovering. (This code is used for internal processing.)
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12070?36
Display: PM?? ERROR Code:********
Used by: QP132
Cause: The pallet ID is incorrect.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)
Remedy: Reread the ID using the ID rereading command. Restart the machine, or execute flush out
processing.Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause. If this problem occurs regularly, output trace data from the
machine and send it to Fuji for analysis.
------------------------------
Code: 12070?37
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"No part in tray pocket"(QP203)
"Parts Runout" (Other QP2s,NP2,QP3)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132,NP2,QP3
Cause: The machine has run out of a component. (This code is used for internal processing by the QP1.
The QP2 reports this code to its host computer.)
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether there are parts in the tray pockets.(QP203)
Supply components.(Other QP2s,NP2,QP3)
Open and close the safety door in the case where the feeder is either STU1 or STU2.(QP3)
------------------------------
Code: 12070?38
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Unexecutable(Servo Lock)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The command cannot be executed because the servo is locked.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
第 724 页
Code: 12070?39
Display: "ICM(PMC?,SCU?) Error Code:********"
"Rejection box is full"
Used by: QP203
Cause: The reject parts box is full.
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: Empty the reject parts box.
------------------------------
Code: 12070?3A
Display: "ICM (PMC?, SCU?) Error Code:********"
"Parts out"
Used by: QP203
Cause: There are no parts in the tray.
"?" indicates the module number (QP2).
"****" indicates the error code.
Remedy: Change the trays.
------------------------------
Code: 12070?3B
Display: "ICM (PMC?, SCU?) Error Code:********"
"Parts pickup error"
Used by: QP242
Cause: Cannot pick up parts from the tray.
"?" indicates the module number.
"****" indicates the error code.
Remedy: Check whether the head is currently able to pick up parts, and that there are parts in the tray
pockets.
------------------------------
Code: 12070?40
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: There are no parts. (This is an internal processing code.)
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy:
------------------------------
Code: 12070?41
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"VP Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The machine has executed the maximum number of recoveries due to vision processing errors.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check the "Vision_type" and "Element_Data" parameters in the Part data for the device in
question.
------------------------------
Code: 12070?42
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
第 725 页