FUJI错误代码查询.pdf - 第1210页

Code: 1CC04003 Display: 1CC04003 元件的方向不对。(XP242) Used by: XP242 Cause: 元件的方向不对。 Remedy: 请确认元件的供应方向。请确认定位点检查位置·范围。 ------------------------------ Code: 1CC04004 Display: 1CC04004 Used by: Cause: Incorrect setting value in…

Remedy: Check the direction in which the parts are supplied.

------------------------------

Code: 1CC02102

Display: 1CC02102

Used by:

Cause: The value input for the back light diameter is 0.

Remedy: Input the correct back light diameter in part data.

------------------------------

Code: 1CC03001

Display: 1CC03001

Used by:

Cause: Direction check area is improper.

Remedy: The specified area is too narrow. Increase the area size.

------------------------------

Code: 1CC03011

Display: 1CC03011

Used by:

Cause: The supply orientation of the part is wrong.

Remedy: A bump exists in the specified area (No bump check). Check the supply orientation of the part.

When checking the supply orientation also make sure that there are no errors in the area position and

area range settings.

------------------------------

Code: 1CC03021

Display: 1CC03021

Used by:

Cause: The supply orientation of the part is wrong.

Remedy: A bump does not exist in the specified area (Bump check). Check the supply orientation of the

part. When checking the supply orientation also make sure that there are no errors in the area position

and area range settings.

------------------------------

Code: 1CC03022

Display: 1CC03022

Used by:

Cause: The supply orientation of the part is wrong.

Remedy: Either a bump exists in the specified area or the verified bump that was found did not fit with a

bump that was too small. Check the supply orientation of the part. When checking the supplyorientation

also make sure that there are no errors in the area position and area range settings.

------------------------------

Code: 1CC04001

Display: 1CC04001

Used by:

Cause: The mark check position (area) is outside the body.

Remedy: Enter the correct mark check position (area) coordinates.

------------------------------

Code: 1CC04002

Display: 1CC04002

Used by:

Cause: Mark check area is improper.

Remedy: Enter the correct mark check area coordinates. This error occurs when the X1 and X2, or Y1

and Y2 values are the same.

------------------------------

第 1209 页

Code: 1CC04003

Display: 1CC04003

元件的方向不对。(XP242)

Used by: XP242

Cause: 元件的方向不对。

Remedy: 请确认元件的供应方向。请确认定位点检查位置·范围。

------------------------------

Code: 1CC04004

Display: 1CC04004

Used by:

Cause: Incorrect setting value in the Part data's Fst_Pin_check_data item (for MCS), or in the Check

Mode algorithm (for F4G).

Remedy: Enter "0, 4, or 5" at the part data's Fst_pin_check_data item (for MCS), or at the Check mode

algorithm (For F4G).

For the CUT mode, enter "0" at the algorithm. For the MARK mode, enter "4" or "5".

------------------------------

Code: 1CC05001

Display: 1CC05001

Used by:

Cause: The mark check area (range) is outside the body of the part.

Remedy: Correct the coordinates of the mark check area (range).

------------------------------

Code: 1CC05002

Display: 1CC05002

Used by:

Cause: Invalid setting for the mark check range.

Remedy: This error occurs if X1 and X2 are the same or smaller, or if Y1 and Y2 are the same or smaller.

The smallest range is five pixels. Ensure the setting is five pixels or greater.

------------------------------

Code: 1CC05003

Display: 1CC05003

Used by:

Cause: The part orientation is not correct.

Remedy: Check the feeding direction of the part.Check the mark check area (range).

------------------------------

Code: 1CC06001

Display: 1CC06001

Used by:

Cause: Failed to register the 2D code object.

Remedy: This error occurs when an attempt is made to create an object without deleting the old one. This

is a rarely occurring error. There could be a problem with the vision system. Cut and then resupply power

to the machine. If this does not rectify the problem, contact Fuji. Obtain a trace report.

------------------------------

Code: 1CC06002

Display: 1CC06002

Used by:

Cause: Failed to delete the 2D code object.

Remedy: This error occurs when an attempt is made to delete an object when no registered object exists.

This is a rarely occurring error. There could be a problem with the vision system. Cut and then resupply

power to the machine. If this does not rectify the problem, contact Fuji. Obtain a trace report.

------------------------------

第 1210 页

Code: 1CC06003

Display: 1CC06003

Used by:

Cause: 2D code could not be found.

Remedy: Reinspect the image to check whether the 2D code was correctly captured or not.

------------------------------

Code: 1CC06004

Display: 1CC06004

Used by:

Cause: An error occurred during 2D code training. 2D code could not be found.

Remedy: Reinspect the image to check whether the 2D code was correctly captured or not.

------------------------------

Code: 1CC06005

Display: 1CC06005

Used by:

Cause: Security violation occurred.

Remedy: The 2D code reader license key could not be found. Check the license key.

------------------------------

Code: 1CFF0000

Display: Application Error

Used by:

Cause: This error occurs when element data is not transmitted from the MCS because device data names

in the production program are described in both upper and lower letters.

Remedy: Describe them either in upper-case or lower-case letters, or upgrade the MCS software. MCS/2H

V1.20 or later.MCS/2E V.3.10 or later.

------------------------------

Code: 1CFF0001

Display: 1CFF0001

Used by:

Cause: RTX main process failed to start (initialize).

Remedy: Failed to generate or open a resource such as a shared memory, an event, or a semaphore, etc..

This is not a common error. There could be a visionsystem abnormality. Restart the system. Obtain the

trace data and contact Fuji if this error occurs multiple times.

------------------------------

Code: 1CFF0002

Display: 1CFF0002

Used by:

Cause: "NT execution" process failed to start (initialize).

Remedy: Failed to generate or open a resource such as a shared memory, an event, or a semaphore, etc..

This is not a common error. There could be a visionsystem abnormality. Restart the system. Obtain the

trace data and contact Fuji if this error occurs multiple times.

------------------------------

Code: 1CFF0003

Display: 1CFF0003

Used by:

Cause: "RTX execute" process failed to start (initialize).

Remedy: Failed to generate or open a resource such as a shared memory, an event, or a semaphore, etc..

This is not a common error. There could be a visionsystem abnormality. Restart the system. Obtain the

trace data and contact Fuji if this error occurs multiple times.

------------------------------

Code: 1CFF0004

第 1211 页