FUJI错误代码查询.pdf - 第2176页

Display: Please enter an integer between A and B. Used by: PDW Cause: A value outside the acceptable range was input. Remedy: Input an integer between A and B. ------------------------------ Code: 230A0008 Display: Pleas…

100%1 / 5282
Code: 2307F002
Display: Optimizer system error.
Used by:
Cause: Optimizer system error.
Remedy: This is an internal error.This error should not occur under normal circumstances.Acquire trace
data and contact your Fuji representative.
------------------------------
Code: 230A0000
Display: PDW is already active.
Used by: PDW
Cause: Cannot start the application because it is already running.
Remedy: Quit the PDW that is currently running.
------------------------------
Code: 230A0001
Display: The MuCap2 board may not be set up correctly.\nClosing PDW.
Used by: PDW
Cause: Failed to detect the video input board.
Remedy: Check that the video input board has been inserted at the PCI slot.
------------------------------
Code: 230A0002
Display: Cannot read image file.
Used by: PDW
Cause: Either the specified image file cannot be found, or the file format is not correct.
Remedy: Check that the file has been saved, and that the image file format is supported for display.
------------------------------
Code: 230A0003
Display: Template file creation error.
Used by: PDW
Cause: Failed to create the template file.
Remedy: Check there is enough disk space. If a file with the same name already exists, check that the file
permissions are not set to read only.
------------------------------
Code: 230A0004
Display: A mistake in the input value.
Used by: PDW
Cause: Characters other than numbers were input.
Remedy: Input numbers only.
------------------------------
Code: 230A0005
Display: Please enter a number.
Used by: PDW
Cause: Characters other than numbers were input.
Remedy: Input numbers only.
------------------------------
Code: 230A0006
Display: Please enter an integer.
Used by: PDW
Cause: Numbers other than integers were input.
Remedy: Input integers only.
------------------------------
Code: 230A0007
第 2175 页
Display: Please enter an integer between A and B.
Used by: PDW
Cause: A value outside the acceptable range was input.
Remedy: Input an integer between A and B.
------------------------------
Code: 230A0008
Display: Please enter a number between A and B.
Used by: PDW
Cause: A value outside the acceptable range was input.
Remedy: Input a number between A and B.
------------------------------
Code: 230A0009
Display: Please enter no more than A characters.
Used by: PDW
Cause: Too many characters input.
Remedy: Reduce the number of characters.
------------------------------
Code: 230A000A
Display: Please enter an integer between 0 and 255.
Used by: PDW
Cause: A value outside the acceptable range was input.
Remedy: Input an integer between 0 and 255.
------------------------------
Code: 230A000B
Display: Please enter a positive integer.
Used by: PDW
Cause: A negative decimal value was input.
Remedy: Input a positive integer.
------------------------------
Code: 230A000C
Display: Out of memory.
Used by: PDW
Cause: There is insufficient internal memory remaining.
Remedy: Reboot the PC.
------------------------------
Code: 230A000D
Display: Failed to import the image(s).
Used by: PDW
Cause: Failed to import the image(s).
Remedy: Position the mark within the search area.
------------------------------
Code: 230A000E
Display: Composition failed.
Used by: PDW
Cause: Composition of the imported image failed.
Remedy: None
------------------------------
Code: 230A000F
Display: No more can be imported.
Used by: PDW
Cause: The maximum number of images has been exceeded.
第 2176 页
Remedy: Stop importing images and perform composition.
------------------------------
Code: 230A0010
Display: No images for composition.
Used by: PDW
Cause: An error occurred during composition.
Remedy: Import images that can be composed.
------------------------------
Code: 230A0011
Display: Multiframe acquisitions cannot be carried out on fields of view where X = 50 mm or less.
Used by: PDW
Cause: The field of view is too narrow.
Remedy: Change the field of view and perform calibration.
------------------------------
Code: 230A0012
Display: No part data file.\nClosing PDW.
Used by: PDW
Cause: PDW cannot be started because the specified PDS file does not exist.
Remedy: Correct the PDS file specification and retry.
------------------------------
Code: 230A0013
Display: Part Data Wizard V1.10 cannot be used with Vision Type %d.\nClosing PDW.
Used by: PDW
Cause: PDW cannot be started because the specified vision type is not supported.
Remedy: Change the PTPVICVT value in the PDS file.
------------------------------
Code: 230A2001
Display: Calibration error
Used by: PDW
Cause: The calibration plate was not recognized correctly.
Remedy: Check that the calibration plate image has been acquired correctly.
------------------------------
Code: 230A2002
Display: Field of view out of range.
Used by: PDW
Cause: The field of view has exceeded the target area for image recognition.
Remedy: Reduce the field of view and carry out calibration again.
------------------------------
Code: 230A2003
Display: Cannot edit.
Used by: PDW
Cause: Failed to enlarge the image because the unit value is invalid.
Remedy: Carry out calibration again.
------------------------------
Code: 230A2004
Display: Adjustment failed.
Used by: PDW
Cause: Failed to set the shutter speed necessary for the specified brightness.
Remedy: Check that there is an image displayed with the brightness adjusted within the correct range,
then carry out the adjustment again.
------------------------------
第 2177 页