FUJI错误代码查询.pdf - 第2182页

Cause: There is no reported code data at the LMS. Remedy: Check the LMS data table. ------------------------------ Code: 31003113 Display: CELL MODE ERROR Check CELL_STATUS Used by: CP3,CP4-1,CP4-2,CP4- 3.CP5,CP6,CP6M,CP…

100%1 / 5282
Code: 230A3307
Display: Total number of balls must be at least 12.
Used by: PDW
Cause: The number of balls specified in element data is less than 12.
Remedy: Input element data to increase the number of balls to 12 or more.
------------------------------
Code: 230A3308
Display: Requires an element with 2 or more balls.
Used by: PDW
Cause: None of the input elements have 2 or more balls.
Remedy: Input an element with 2 or more balls.
------------------------------
Code: 230A4000
Display: Cannot perform vision test.
Used by: PDW
Cause: Failed to compile the edited template.
Remedy: Carry out the template editing again.
------------------------------
Code: 230A4001
Display: Cannot read Debug Information.
Used by: PDW
Cause: Could not read one of either the PDS, image, template or debug data files.
Remedy: Check that you have all the files and they are all in working order.
------------------------------
Code: 230A4002
Display: Filename has invalid characters.
Used by: PDW
Cause: The conditions file name has invalid characters.
Remedy: Change the file name, removing invalid characters.
------------------------------
Code: 31003110
Display: Command_line transmission error
Used by: CP3,CP4-1,CP4-2,CP4-
3.CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL2,GL5,GL541,GSP2,GSP3,GSP5,GP2,GP3,GP6,IP1,IP3,Q
P242,QP201
Cause: Command line transmission error.
Remedy: Press the [Reset] button. Send the board type information from the machine to the LMS again.
------------------------------
Code: 31003111
Display: SCH. Check DATA TABLE on LMS
Used by: CP3,CP4-1,CP4-2,CP4-
3.CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL2,GL5,GL541,GSP2,GSP3,GSP5,GP2,GP3,GP6,IP1,IP3,Q
P242,QP201
Cause: There is no data in the production schedule table.
Remedy: Check the LMS production schedule table.
------------------------------
Code: 31003112
Display: DATA Check DATA TABLE on LMS
Used by: CP3,CP4-1,CP4-2,CP4-
3.CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL2,GL5,GL541,GSP2,GSP3,GSP5,GP2,GP3,GP6,IP1,IP3,Q
P242,QP201
第 2181 页
Cause: There is no reported code data at the LMS.
Remedy: Check the LMS data table.
------------------------------
Code: 31003113
Display: CELL MODE ERROR Check CELL_STATUS
Used by: CP3,CP4-1,CP4-2,CP4-
3.CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL2,GL5,GL541,GSP2,GSP3,GSP5,GP2,GP3,GP6,IP1,IP3,Q
P242,QP201
Cause: The reported board type is not the same as the board type waiting at the LMS.
Remedy: Check cell status or changeover mode.
------------------------------
Code: 31003114
Display: LMS is BUSY Waiting for LMS edition
Used by: GSP2,GSP3,IP3
Cause: The LMS production schedule table was being prepared when information was reported.
Remedy: Wait for the LMS to finish preparing the production schedule table.
------------------------------
Code: 31003116
Display: 31003116
Used by:
Cause: A command was sent to a passive cell.
Remedy: Check the LMS and the machine cell status settings and enter correct values.
------------------------------
Code: 31003117
Display: 31003117
Used by:
Cause: The status data is out of range.
Remedy: Check the cell status values and enter correct values.
------------------------------
Code: 31003118
Display: 31003118
Used by:
Cause: There is no reserved data.
Remedy: Check the table data, etc. necessary for changeover and then perform changeover again.
------------------------------
Code: 51??0000
Display: Normal ending or normal start.
Used by:
Cause: The command was completed normally or started normally (when using immediate return mode).
Remedy:
------------------------------
Code: 51??0001
Display: Command format error.
Used by:
Cause: One of the following mistakes has been made in the format of the command. Either the
subcommand name is incorrect, the number of arguments is incorrect or an invalid argument has been
specified as the option argument.
Remedy: Check that there are no mistakes in the command format.
------------------------------
Code: 51??0002
Display: Nickname error.
第 2182 页
Used by:
Cause: The nickname is incorrect.
Remedy: Check the specified nickname.
------------------------------
Code: 51??0003
Display: Either the file name or path name is too long.
Used by:
Cause: File names may be up to 23 characters and path names may be up to 127 characters.
Remedy: Check the specified file and path names.
------------------------------
Code: 51??0004
Display: The file name is incorrect.
Used by:
Cause: The specified file name is incorrect.
Remedy: Check the specified file name.
------------------------------
Code: 51??0005
Display: Machine not supported.
Used by:
Cause: Either the machine type or the command is not supported.
Remedy: Check the specified nickname and machine type.
------------------------------
Code: 51??0006
Display: Revision not supported.
Used by:
Cause: The revision cannot be supported by the machine or a mistake has been made in specifying the
revision.
Remedy: Check how the revision was specified.
------------------------------
Code: 51??0007
Display: Specified revision does not exist.
Used by:
Cause: This revision does not exist in the machine.
Remedy:
------------------------------
Code: 51??0008
Display: Specified job number is out of range.
Used by:
Cause: The job number specified in the command line is incorrect.
Remedy: Check the specified job number.
------------------------------
Code: 51??0009
Display: Specified job does not exist.
Used by:
Cause: The job specified by the nickname and job number does not exist.
Remedy:
------------------------------
Code: 51??0010
Display: Partial data setting is incorrect.
Used by:
Cause: There is an error in the partial data setting specified in the command line.
第 2183 页