FUJI错误代码查询.pdf - 第656页

Cause: The pallet ID in the report received from the PMC is different from the previous pallet ID. The pallet ID managed by the PMC is determined at the pallet stopping position and should not change until the pallet mov…

being set using the I/O operation, the board information will be deleted if the reset-start operation is

carried out thereby making it impossible to execute production.

Remedy: First confirm whether or not the pallet ID data has been incorrectly read. In the case where, for

example, an error occurs while indexing, return the pallet to the correct position and execute the [PID

Read] command. Once the SS-axis has been returned to its origin position using the [SS Move] command,

ensure that the error has been cleared. It will not be possible to proceed with operation unless the error is

cleared. If necessary restart normal operation after unloading all boards inside the machine using the

[Flush Out] command.

------------------------------

Code: 12066811

Display: DATA LOGIC ERROR [12066811]

Used by: QP132

Cause: The board information table inside the pallet does not exist. On the QP132, the board

information is saved in the table when the board is loaded, and the pallet ID is saved at the approach

station after the board is loaded. As a result, when a board exists in the pallet loader after being set using

the I/O commands, the board information will be deleted if the reset-start operation is carried out thereby

making it impossible to execute production.

Remedy: First confirm whether or not the pallet ID data has been incorrectly read. In the case where, for

example, an error occurs while indexing, return the pallet to the correct position and execute the [PID

Read] command. Once the SS-axis has been returned to its origin position using the [SS Move] command,

ensure that the error has been cleared. It will not be possible to proceed with operation unless the error is

cleared. If necessary restart normal operation after unloading all boards inside the machine using the

[Flush Out] command.

------------------------------

Code: 12066812

Display: DATA LOGIC ERROR [12066812]

Used by: QP132

Cause: The creation of multiple board management tables in the QP132 internal data was detected. This

error occurs when separate pallets are found to have the same ID, or there is a QP132 software bug.

Remedy: First confirm whether or not the pallet ID data has been incorrectly read. In the case where, for

example, an error occurs while indexing, return the pallet to the correct position and execute the [PID

Read] command. Once the SS-axis has been returned to its origin position using the [SS Move] command,

ensure that the error has been cleared. It will not be possible to proceed with operation unless the error is

cleared. If necessary restart normal operation after unloading all boards inside the machine using the

[Flush Out] command.

------------------------------

Code: 12066813

Display: DATA LOGIC ERROR [12066813]

Used by: QP132

Cause: During operation in the "One board per pallet" mode a pallet with multiple boards was detected.

This is a bug in the QP132 software.

Remedy: First confirm whether or not the pallet ID data has been incorrectly read. In the case where, for

example, an error occurs while indexing, return the pallet to the correct position and execute the [PID

Read] command. Once the SS-axis has been returned to its origin position using the [SS Move] command,

ensure that the error has been cleared. It will not be possible to proceed with operation unless the error is

cleared. If necessary restart normal operation after unloading all boards inside the machine using the

[Flush Out] command.

------------------------------

Code: 12066814

Display: DATA LOGIC ERROR [12066814]

Used by: QP132

第 655 页

Cause: The pallet ID in the report received from the PMC is different from the previous pallet ID. The

pallet ID managed by the PMC is determined at the pallet stopping position and should not change until

the pallet moves during the next circulation. This error will occur if a PMC report mistake is detected, the

SS-axis is inched or if the pallet position is displaced by any circulation of pallets other than the

circulation associated with automatic operation.

Remedy: First confirm whether or not the pallet ID data has been incorrectly read. In the case where, for

example, an error occurs while indexing, return the pallet to the correct position and execute the [PID

Read] command. Once the SS-axis has been returned to its origin position using the [SS Move] command,

ensure that the error has been cleared. It will not be possible to proceed with operation unless the error is

cleared. If necessary restart normal operation after unloading all boards inside the machine using the

[Flush Out] command.

------------------------------

Code: 12066815

Display: DATA LOGIC ERROR [12066815]

Used by: QP132

Cause: This is a malfunction in the software. The buffer was filled without an inquiry being made by

communications packet processing.

Remedy: Cut the power to the machine and then turn it back on. There are also cases where it is

necessary to carry out the flush out operation.

------------------------------

Code: 12066816

Display: DATA LOGIC ERROR [12066816]

Used by: QP132

Cause: The X035: out-conveyor board arrival check sensor (OUT_ARRV_CHK) failed to work correctly. Or

there is a bug in the QP1 software.

Remedy: Carry out a check of the sensor.

------------------------------

Code: 12066817

Display: Same as code

Used by: QP132

Cause: Discontinue.

Remedy: Discontinue.

------------------------------

Code: 12066818

Display: Same as code

Used by: QP132

Cause: The machine has stopped operating because a processing or data inconsistency has been

detected.

Remedy: First confirm whether or not the pallet ID data has been incorrectly read. In the case where, for

example, an error occurs while indexing, return the pallet to the correct position and execute the [PID

Read] command. Once the SS-axis has been returned to its origin position using the [SS Move] command,

ensure that the error has been cleared. It will not be possible to proceed with operation unless the error is

cleared. If necessary restart normal operation after unloading all boards inside the machine using the

[Flush Out] command.

------------------------------

Code: 12066819

Display: PLT size error [12066819]

Used by: QP132

Cause: Pallet size or pitch information outside specified limits has been detected.

Remedy: First confirm whether or not the pallet ID data has been incorrectly read. In the case where, for

example, an error occurs while indexing, return the pallet to the correct position and execute the [PID

第 656 页

Read] command. Once the SS-axis has been returned to its origin position using the [SS Move] command,

ensure that the error has been cleared. It will not be possible to proceed with operation unless the error is

cleared. If necessary restart normal operation after unloading all boards inside the machine using the

[Flush Out] command.

------------------------------

Code: 1206681A

Display: Pallet position error [1206681A]

Used by: QP132

Cause: The position of the pallet which was advanced by the index motion does not match the index

motion count. This occurs when a gap occurs between pallets, when a pallet did not advance during index

motion, when there is interference with another part of the machine, and when the SS-axis motor has

broken down.

Remedy: First confirm whether or not the pallet ID data has been incorrectly read. In the case where, for

example, an error occurs while indexing, return the pallet to the correct position and execute the [PID

Read] command. Once the SS-axis has been returned to its origin position using the [SS Move] command,

ensure that the error has been cleared. It will not be possible to proceed with operation unless the error is

cleared. If necessary restart normal operation after unloading all boards inside the machine using the

[Flush Out] command.

------------------------------

Code: 1206681B

Display: Vision Processing result error

Used by: QP132

Cause: VP has reported that the part inspection is complete, however no value has been set.

Remedy: There may be a problem with the vision system board or software. Change the vision system

board or VP-card, and reset-start the machine. If this problem occurs regularly, output trace data from

the machine and send it to Fuji for analysis.

------------------------------

Code: 1206681C

Display: CARRIER ARRANGE ERROR 1206681C

Used by: QP132

Cause: There is no relevant pallet size in the data carrier arrangement pattern.

Remedy: Check the pallet's data carrier arrangement pattern. If the data carrier is broken, replace it.

------------------------------

Code: 1206681D

Display: Pallet position error [1206681D]

Used by: QP132

Cause: A contradiction in the pallet's position at the approach station, mark read module, and landing

station has been detected (Unable to read an ID is also included). This occurs when a pallet did not

advance during index motion, when a gap occurs between pallets or, due for some reason the ID head

cable is unattached and an error occurs when the cable is attached.

Remedy: First confirm whether or not the pallet ID data has been incorrectly read. In the case where, for

example, an error occurs while indexing, return the pallet to the correct position and execute the [PID

Read] command. Once the SS-axis has been returned to its origin position using the [SS Move] command,

ensure that the error has been cleared. It will not be possible to proceed with operation unless the error is

cleared. If necessary restart normal operation after unloading all boards inside the machine using the

[Flush Out] command.

------------------------------

Code: 1206681E

Display: Pallet position error [1206681E]

Used by: QP132

Cause: A contradictory pallet stopping state using the current index motion type has been detected,

第 657 页