FUJI错误代码查询.pdf - 第1884页
Code: 21005501 Display: Specified device number not found in device data. Used by: Cause: The device number does not exist. Remedy: Change the device data and try again. ------------------------------ Code: 21005502 Disp…
Cause: The set file data field does not match the format of the data field.
Remedy: Change either the file or the format. Select F3 to check the data.
------------------------------
Code: 21005333
Display: Selected file not found
Used by:
Cause: The filename does not exist.
Remedy: Select F1 for a directory of files.
------------------------------
Code: 21005350
Display: Generic device editor open error.
Used by:
Cause: The generic device editor will not operate. The generic device editor module does not exist.
Remedy: Install the generic device editor.
------------------------------
Code: 21005390
Display: Failed to create geniric device.
Used by:
Cause: A generic device file could not be created.
Remedy: Check Part data.
------------------------------
Code: 21005400
Display: Index not found
Used by:
Cause: The index was not found when inputting items.
Remedy: Input the index again, and re-execute.
------------------------------
Code: 21005401
Display: Editor descriptor index not found.
Used by:
Cause: The editor descriptor index was not found.
Remedy: Check the index guide and re-execute.
------------------------------
Code: 21005402
Display: This file is not a program file.
Used by:
Cause: This file is not a production program or source program.
Remedy: Select C with the command key. Only these production or source programs can be used.
------------------------------
Code: 21005403
Display: Select index not used not execute line command.
Used by:
Cause: An index error occurred.
Remedy: Re-install the editor software.
------------------------------
Code: 21005404
Display: Srch data not found
Used by:
Cause: The specified data was not found.
Remedy: Check the data.
------------------------------
第 1883 页
Code: 21005501
Display: Specified device number not found in device data.
Used by:
Cause: The device number does not exist.
Remedy: Change the device data and try again.
------------------------------
Code: 21005502
Display: Specified device number not found in sequence data.
Used by:
Cause: This is a warning.
Remedy: The specified device number was not found in sequence data. The sequence data accompanying
the specified device number does not exist.
------------------------------
Code: 21005503
Display: Working mode not 'D'
Used by:
Cause: The input device number was wrong.
Remedy: The input device number must have an accompanying sequence number.
------------------------------
Code: 21005507
Display: Change command device number not select
Used by:
Cause: Either the device number was not changed or not input.
Remedy: After inputting the data, select F6 [execute].
------------------------------
Code: 21005555
Display: This item is automatically set; no setting required.
Used by:
Cause: This item is automatically set. No setting is required.
Remedy: This is just a warning message. It is not an error.
------------------------------
Code: 21005600
Display: Data entry error. Please check (File descriptor MIN & MAX)
Used by:
Cause: When inputting a block of data, some input was out of range.
Remedy: Adjust the input data and re-input the data.
------------------------------
Code: 21005601
Display: Search data not found.
Used by:
Cause: The data does not exist.
Remedy: Edit the data and re-execute.
------------------------------
Code: 21005602
Display: Data type parameter not specified in srch/rpl command.
Used by:
Cause: The parameter when the direct command was input is wrong.
Remedy: Check the input parameter.
------------------------------
Code: 21005603
Display: Data type match not found.
第 1884 页
Used by:
Cause: The device size of the Device data is too small or too large for the field.
Remedy: The data field cannot be edited at this point, so make sure it is correct beforehand.
------------------------------
Code: 21005604
Display: Data type cannot accept characters.
Used by:
Cause: This data type only accepts numerical input.
Remedy: Input numerical data.
------------------------------
Code: 21005605
Display: can't execute Srch/rpl command
Used by:
Cause: This is a multiple-heading field. A batch input was attempted for a single data field.
Remedy: Select more than one data field with the cursor. Batch input can only be performed in multiple-
heading fields.
------------------------------
Code: 21005606
Display: Search data or replace data not specified.
Used by:
Cause: The address of the data has not been set.
Remedy: Specify the address of the data and re-execute.
------------------------------
Code: 21005700
Display: Copy line overflow
Used by:
Cause: In the editor there is a buffer, allowing the maximum number of lines to double. This buffer has
overflowed.
Remedy: Eliminate all unnecessary data.
------------------------------
Code: 21005701
Display: Paste buffer overflow - clear buffer? [y/n]
Used by:
Cause: Copy command overflow mode was executed over 100 times.
Remedy: Clear either the paste buffer or clear buffer or both.
------------------------------
Code: 21005702
Display: Single entry data. Function key not valid
Used by:
Cause: The function key used cannot handle multiple-entry data. The copy, delete and other such keys
can only handle single entry data.
Remedy: Input single entry data.
------------------------------
Code: 21005703
Display: Data field over
Used by:
Cause: The specified address is out of the data field.
Remedy: Check the input data.
------------------------------
Code: 21005704
Display: Data field no match
第 1885 页