FUJI错误代码查询.pdf - 第443页

Code: 12035902 Display: Used by: CP5,CP6,CP6M,CP65,IP3 Cause: Axis number 9 incorrect command. Remedy: Turn off the machine power. ------------------------------ Code: 12035903 Display: Used by: CP5,IP3,NP132,NP133 Cause…

100%1 / 5282
Cause: Axis number 8 + soft limit.
Remedy: Turn off the machine power.
------------------------------
Code: 12035806
Display:
Used by: CP5,CP6,CP6M,CP65,NP132,NP133
Cause: Axis number 8 - soft limit.
Remedy: Turn off the machine power.
------------------------------
Code: 12035807
Display:
Used by: CP5,CP6,CP6M,CP65,IP3
Cause: Axis number 8 not ready.
Remedy: Turn off the machine power.
------------------------------
Code: 12035808
Display:
Used by: CP5,CP6,CP6M,CP65
Cause: Axis number 8 emergency stop.
Remedy: Turn off the machine power.
------------------------------
Code: 12035809
Display:
Used by: CP5,CP6,CP6M,CP65,IP3
Cause: Incorrect parameter was sent from axis number 8.
Remedy: Turn off the machine power.
------------------------------
Code: 1203580A
Display:
Used by: CP5,CP6,CP6M,CP65,IP3,NP133E,NP134E,NP153E
Cause: Axis number 8 encoder error.
Remedy: Turn off the machine power.
------------------------------
Code: 1203580B
Display:
Used by: CP5,CP6,CP6M,CP65
Cause: Axis number 8 synchronicity error.
Remedy: Cut the machine power.
------------------------------
Code: 1203580C
Display:
Used by: CP6,CP6M,CP65
Cause: The servo interlock was activated during startup.
Remedy: Check the interlock sensor.
------------------------------
Code: 12035901
Display:
Used by: CP5,CP6,CP6M,CP65,IP3
Cause: Axis number 9 system error.
Remedy: Turn off the machine power.
------------------------------
第 442 页
Code: 12035902
Display:
Used by: CP5,CP6,CP6M,CP65,IP3
Cause: Axis number 9 incorrect command.
Remedy: Turn off the machine power.
------------------------------
Code: 12035903
Display:
Used by: CP5,IP3,NP132,NP133
Cause: Axis number 9 placement time too long.
Remedy: Turn off the machine power.
------------------------------
Code: 12035904
Display:
Used by: CP5,IP3,NP132,NP133
Cause: Axis number 9 deviation overflow.
Remedy: Turn off the machine power.
------------------------------
Code: 12035905
Display:
Used by: CP5,IP3,NP132,NP133
Cause: Axis number 9 + soft limit.
Remedy: Turn off the machine power.
------------------------------
Code: 12035906
Display:
Used by: CP5,NP132,NP133
Cause: Axis number 9 - soft limit.
Remedy: Turn off the machine power.
------------------------------
Code: 12035907
Display:
Used by: CP5,CP6,CP6M,CP65,IP3
Cause: Axis number 9 not ready.
Remedy: Turn off the machine power.
------------------------------
Code: 12035908
Display:
Used by: CP5
Cause: Axis number 9 emergency stop.
Remedy: Turn off the machine power.
------------------------------
Code: 12035909
Display:
Used by: CP5,IP3
Cause: Incorrect parameter was sent from axis number 9.
Remedy: Turn off the machine power.
------------------------------
Code: 1203590A
Display:
Used by: CP5,IP3,NP133E,NP134E,NP153E
第 443 页
Cause: Axis number 9 encoder error.
Remedy: Turn off the machine power.
------------------------------
Code: 1203590B
Display:
Used by: CP5
Cause: Axis number 9 synchronicity error.
Remedy: Cut the machine power.
------------------------------
Code: 1203590C
Display:
Used by:
Cause: The servo interlock was activated during startup.
Remedy: Check the interlock sensor.
------------------------------
Code: 12035A01
Display:
Used by: IP3
Cause: Axis number 10 system error.
Remedy: Turn off the machine power.
------------------------------
Code: 12035A02
Display:
Used by: IP3
Cause: Axis number 10 incorrect command.
Remedy: Turn off the machine power.
------------------------------
Code: 12035A03
Display:
Used by: IP3,NP132,NP133
Cause: Axis number 10 placement time too long.
Remedy: Turn off the machine power.
------------------------------
Code: 12035A04
Display:
Used by: IP3,NP132,NP133
Cause: Axis number 10 deviation overflow.
Remedy: Turn off the machine power.
------------------------------
Code: 12035A05
Display:
Used by: IP3,NP132,NP133
Cause: Axis number 10 + soft limit.
Remedy: Turn off the machine power.
------------------------------
Code: 12035A06
Display:
Used by: NP132,NP133
Cause: Axis number 10 - soft limit.
Remedy: Turn off the machine power.
------------------------------
第 444 页