FUJI错误代码查询.pdf - 第2064页

------------------------------ Code: 2100CA08 Display: Directory make error Used by: Cause: The directory cannot be made on the destination drive. Remedy: Check the capacity of the destination drive. --------------------…

100%1 / 5282
Code: 2100CA00
Display:
Used by:
Cause: Not presently supported.
Remedy:
------------------------------
Code: 2100CA01
Display: Illegal parameter
Used by:
Cause: There is a mistake in the start command.
Remedy: Correct the command statement. It should read: Ref_cp <program name> [-d=out device] [-r]
+wtlb
------------------------------
Code: 2100CA02
Display: Message file read error
Used by:
Cause: Either the message file does not exist, the file has been corrupted, or there is not enough
memory.
Remedy: After the present operation is complete, re-execute the procedure which caused the error.
Alternatively, re-install the system.
------------------------------
Code: 2100CA03
Display: Read pipe open error
Used by:
Cause: The read pipe for the console does not exist.
Remedy: Reboot the MCS.
------------------------------
Code: 2100CA04
Display: Write pipe open error
Used by:
Cause: The write pipe for the console does not exist.
Remedy: Reboot the MCS.
------------------------------
Code: 2100CA05
Display: CRT event link error
Used by:
Cause: The CRT event does not exist.
Remedy: Reboot the MCS.
------------------------------
Code: 2100CA06
Display: LS pipe create error
Used by:
Cause: The pipe for the same LS period cannot be created.
Remedy: Reboot the MCS.
------------------------------
Code: 2100CA07
Display: Work directory create error
Used by:
Cause: There is insufficient RAM disk capacity to create the work directory.
Remedy: After the present operation is complete, re-execute the procedure which caused the error.
Alternatively, reboot the MCS.
第 2063 页
------------------------------
Code: 2100CA08
Display: Directory make error
Used by:
Cause: The directory cannot be made on the destination drive.
Remedy: Check the capacity of the destination drive.
------------------------------
Code: 2100CA09
Display: Path error
Used by:
Cause: A file which is not a production program or a file which is not in the Fuji format is included
among the files being copied.
Remedy: Check the files.
------------------------------
Code: 2100CA0A
Display: Device error
Used by:
Cause: The device specified in the destination file does not exist.
Remedy: Check the destination file.
------------------------------
Code: 2100CA0B
Display: Seek Error
Used by:
Cause: The destination media is faulty. Either the disk is not formatted or the disk is damaged.
Remedy: Replace the floppy disk or media.
------------------------------
Code: 2100CA0C
Display: Version error
Used by:
Cause: The environment file is incorrect.
Remedy: Re-install the system.
------------------------------
Code: 2100CA0D
Display: No support M/C type
Used by:
Cause: A production program for an unsupported machine type was copied.
Remedy: Upgrade to a version of the MCS software which supports the specified machine type.
------------------------------
Code: 2100CA0E
Display: Reference copy error
Used by:
Cause: Copying cannot be performed because, for example, the destination file is write protected.
Remedy: Clear the write protect.
------------------------------
Code: 2100CA0F
Display: LS fork error
Used by:
Cause: Either the LS task does not exist or it cannot be started.
Remedy: Re-install the system.
------------------------------
Code: 2100CA10
第 2064 页
Display: Help task fork error
Used by:
Cause: Either the help task does not exist or it cannot be started.
Remedy: Re-install the system.
------------------------------
Code: 2100CA11
Display: Err_disp task fork error
Used by:
Cause: Either an error display task does not exist or it cannot be started.
Remedy: Re-install the system.
------------------------------
Code: 2100CA12
Display: Memory full
Used by:
Cause: The memory is full.
Remedy: After completing the present operation, reduce the number of files to be copied.
------------------------------
Code: 2100CA13
Display: Directory open error
Used by:
Cause: The directory does not exist.
Remedy: Ensure that the path specified in the input program is correct.
------------------------------
Code: 2100CA14
Display:
Used by:
Cause: Presently not supported.
Remedy:
------------------------------
Code: 2100CA15
Display: Nozzle data empty
Used by:
Cause: The name of the nozzle assignment table has not been entered in the specified production
program.
Remedy: Specify the name of the nozzle assignment table in the production program.
------------------------------
Code: 2100CA16
Display: Environment file open error
Used by:
Cause: The environment file does not exist.
Remedy: Re-install the system.
------------------------------
Code: 2100CA17
Display: Environment file read error
Used by:
Cause: The environment file has been corrupted.
Remedy: Re-install the system.
------------------------------
Code: 2100CA18
Display: Sample file create error
Used by:
第 2065 页