FUJI错误代码查询.pdf - 第796页

(value replacing "??" is module number)(QP132) Remedy: Check the program coordinates and the Proper data values. ------------------------------ Code: 1207A?10 Display: "PMC?(ICM,SCU?) Error Code:********&q…

100%1 / 5282
------------------------------
Code: 1207A?05
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Z-axis PG Disconnection Err" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Z-axis PG disconnection error.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether the connector has become disconnected from the servo axis, or whether an error
has occurred in the servo amp.
------------------------------
Code: 1207A?0B
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Z-axis Positioning Time Out" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Z-axis positioning timeout.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether something is interfering with the axis, whether the axis action has become
extremely heavy, or whether an error has occurred in the servo amp.
------------------------------
Code: 1207A?0C
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Deviation Count Overflow(Z)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Z-axis deviation overflow.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether something is interfering with the axis, whether the axis action has become
extremely heavy, or whether an error has occurred in the servo amp.
------------------------------
Code: 1207A?0D
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Z-axis (-) Software Limit" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The axis movement target value has exceeded the software limit in the (-) direction.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check the program coordinates and the Proper data values.
------------------------------
Code: 1207A?0E
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Z-axis (+) Software Limit" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The axis movement target value has exceeded the software limit in the (+) direction.
(value replacing "?" is module number; error code appears in place of asterisks)
第 795 页
(value replacing "??" is module number)(QP132)
Remedy: Check the program coordinates and the Proper data values.
------------------------------
Code: 1207A?10
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Overcurrent/PWT Overheat" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Either excessive current or overheating of the power transistor has been detected in the Z-axis
servopack.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Servopack replacement may be necessary.
------------------------------
Code: 1207A?11
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Short Circuit" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: A short circuit has been detected in the Z-axis servopack.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether one of the motor power wires (U, V, or W) is shorted to the ground (E).
------------------------------
Code: 1207A?20
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Software Limit (+)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Z-axis servopack software limit has been exceeded in the (+) direction.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: The movement target position exceeds the limit values specified in the Proper data. Check the
movement target value and the Proper data values.
------------------------------
Code: 1207A?21
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Software Limit (-)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Z-axis servopack software limit has been exceeded in the (-) direction.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: The movement target position exceeds the limit values specified in the Proper data. Check the
movement target value and the Proper data values.
------------------------------
Code: 1207A?22
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Positioning Time-out" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
第 796 页
Cause: Z-axis servopack positioning timeout.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether something is interfering with the axis, or whether the axis action has become
extremely heavy.
------------------------------
Code: 1207A?23
Display: "ICM (PMC?,SCU?) Error Code:********" (QP2)
"Power to the servo amp has been cut" (QP2)
Used by: QP202,QP203,QP242
Cause: The power to the servo amp has been cut. ? is the module number. "****" is the error code.
Remedy: Check around the power source for problems such as loose terminal blocks etc.
------------------------------
Code: 1207A?2A
Display: PM?? ERROR Code: ********
"Z-axis down time out"
Used by: QP132
Cause: Z-axis descent timed out for nozzle A.
The question marks represent the module number, and the asterisks represent the error code.
Remedy: Check that axis movement is not being interfered with, and that movement is normal along the
entire length of the axis.
------------------------------
Code: 1207A?2B
Display: PM?? ERROR Code: ********
"Z-axis down time out"
Used by: QP132
Cause: Z-axis descent timed out for nozzle B.
The question marks represent the module number, and the asterisks represent the error code.
Remedy: Check that axis movement is not being interfered with, and that movement is normal along the
entire length of the axis.
------------------------------
Code: 1207A?2C
Display: PM?? ERROR Code: ********
"Z-axis down time out"
Used by: QP132
Cause: Z-axis descent timed out for nozzle C.
The question marks represent the module number, and the asterisks represent the error code.
Remedy: Check that axis movement is not being interfered with, and that movement is normal along the
entire length of the axis.
------------------------------
Code: 1207A?2D
Display: PM?? ERROR Code: ********
"Z-axis down time out"
Used by: QP132
Cause: Z-axis descent timed out for nozzle D.
The question marks represent the module number, and the asterisks represent the error code.
Remedy: Check that axis movement is not being interfered with, and that movement is normal along the
entire length of the axis.
------------------------------
Code: 1207A?2E
Display: PM?? ERROR Code: ********
第 797 页