FUJI错误代码查询.pdf - 第2190页

was made to download it to the machine foreground. Remedy: ------------------------------ Code: 51??0068 Display: Non-deletable program. Used by: Cause: Among the programs specified for deletion there is a program which …

100%1 / 5282
Code: 51??0060
Display: The machine is transmitting.
Used by:
Cause: The machine with the specified nickname is presently transmitting other data.
Remedy: Execute in return on completion mode or execute again after waiting for a short time.
------------------------------
Code: 51??0061
Display: Incorrect reply from machine.
Used by:
Cause: An incorrect reply was reported from the machine. A description of the error is contained in the
supplementary information.
Remedy: Check the machine error code reported in the supplementary information and correct the data
or take other necessary steps.
------------------------------
Code: 51??0062
Display: Machine response time-up error.
Used by:
Cause: Even though the specified waiting time elapsed no response was returned from the machine.
Remedy: Check the machine status.
------------------------------
Code: 51??0063
Display: No program storage field in the machine.
Used by:
Cause: There is no field in the machine in which to download the program. There are already 10
production programs in the machine.
Remedy: After deleting unnecessary programs, execute download.
------------------------------
Code: 51??0064
Display: Program already exists.
Used by:
Cause: The specified production program is already in the machine.
Remedy: If downloading a program with the same name, append the overwrite option and then download.
Alternatively, execute download after deleting the relevant program.
------------------------------
Code: 51??0065
Display: There is no program.
Used by:
Cause: The specified production program is not in the machine.
Remedy:
------------------------------
Code: 51??0066
Display: Program in the foreground.
Used by:
Cause: Although the specified production program is already in the machine foreground, an attempt was
made to download it to the machine background.
Remedy:
------------------------------
Code: 51??0067
Display: Program in the background.
Used by:
Cause: Although the specified production program is already in the machine background, an attempt
第 2189 页
was made to download it to the machine foreground.
Remedy:
------------------------------
Code: 51??0068
Display: Non-deletable program.
Used by:
Cause: Among the programs specified for deletion there is a program which cannot be deleted.
Remedy:
------------------------------
Code: 51??0069
Display: No program.
Used by:
Cause: The program specified for deletion is not in the machine or if several programs have been
specified for deletion, one of them is not in the machine.
Remedy:
------------------------------
Code: 51??0070
Display: Too many programs specified.
Used by:
Cause: Too many programs have been specified for deletion.
Remedy: No more than ten programs can be specified since there are only a maximum of ten programs in
the machine.
------------------------------
Code: 51??0071
Display: Specified machine is a slave.
Used by:
Cause: The machine specified by its nickname is a slave. Production information cannot be acquired
from a slave.
Remedy: Check the nickname and specify a master.
------------------------------
Code: 51??0079
Display: Specified machine does not support the command.
Used by:
Cause: The command cannot be performed because the specified machine does not support it.
Remedy:
------------------------------
Code: 51??0080
Display: Production log acquisition has already ended.
Used by:
Cause: Production data log acquisition for the applicable machine has already been ended with the finish
command.
Remedy: To perform production data log acquisition, it is necessary to restart the C/C.
------------------------------
Code: 51??0081
Display: Real-time process simultaneous start limit exceeded.
Used by:
Cause: For the same machine up to four real-time commands may be started/operated at the same time.
However, an attempt was made to start a fifth real-time command.
Remedy: Check that no real-time commands are being executed at the machine.
------------------------------
Code: 51??0082
第 2190 页
Display: Nickname specified as filename in flush command.
Used by:
Cause: A name the same as the nickname cannot be set in the output file specified by the flush
command.
Remedy: Specify a name other than the nickname for the output file name.
------------------------------
Code: 51??0083
Display: The production data log is being acquired.
Used by:
Cause: The production data log for the target machine is presently being acquired.
Remedy: Use the fi finish command to stop acquisition of the production data log.
------------------------------
Code: 51??0084
Display: The sampled event is not defined.
Used by:
Cause: The sampled event is not recorded in the C/C setting data.
Remedy: None of the items EVENT,REMARK or HLP is recorded in the C/C setting data,therefore the
production data is not sampled.Record the production data which you want to sample in the C/C setting
data.
------------------------------
Code: 51??0090
Display: Error ending machine.
Used by:
Cause: When a single command was executed for a number of machines, a machine which had made an
error stop was discovered. Result codes for each of the machines are reported to the supplementary
information.
Remedy:
------------------------------
Code: 51??0091
Display: Command canceled by operator.
Used by:
Cause: Execution of the command was canceled by the operator.
Remedy:
------------------------------
Code: 51??0092
Display: Non-interruptable command.
Used by:
Cause: The specified job is a command which cannot be interrupted.
Remedy:
------------------------------
Code: 51??0093
Display: Command in interrupt-prohibit status.
Used by:
Cause: Interruption of the specified job is presently prohibited.
Remedy:
------------------------------
Code: 51??0094
Display: Command not supported in present version.
Used by:
Cause: The specified command is not supported in the present C/C.
Remedy: The specified command cannot be used in the present C/C. The command will either be
第 2191 页