FUJI错误代码查询.pdf - 第2662页

Display: 执行错误 Used by: Cause: 模块构成与任务内的Machine Configuration不一致。 Remedy: 根据情况，进行下述对应。符合设备模块构成时，请确认任务内的模块构成并修正。符合任务内模块构成时 请更改设备的模块构成以及生产线构成服务器的模型标准值。 ------------------------------ Code: 61746201 Display: 执行错误 Used by: Ca…

100%1 / 5282
Cause: 设备中发生多个错误。
Remedy: 请确认各个错误的详细Cause。
------------------------------
Code: 61746009
Display: 执行错误
Used by: 无
Cause: 与传输处机器的连接失败了。
Remedy: 因为传输处的机器还未起动或者没有正常的起动所以不能连接。
请确认机器正常起动后重新传输。
------------------------------
Code: 6174600A
Display: 执行错误
Used by: 无
Cause: 规格数据的传输失败了。
Remedy: 向机器传输时所必需的设定文件有可能损坏了。
请确认FncTfSrv2.conf的设定文件。
如果损坏了请重新安装Fuji Flexa。
------------------------------
Code: 61746065
Display: 执行错误
Used by:
Cause: 设备内找不到指定的程序，无法切换。
Remedy: 请更新程序列表，确认指定的程序存在后再试。
------------------------------
Code: 61746069
Display: 执行错误
Used by:
Cause: 设备内找不到指定的程序，无法删除。
Remedy: 请更新程序列表，确认指定的程序存在后再试。
------------------------------
Code: 61746101
Display: 执行错误
Used by:
Cause: 在生产线编辑器中设定的基座信息与机器不一致。
Remedy: 基座类型或者机器类型有可能不正确。
1. 请通过生产线编辑器的基座编辑画面取得基座类型。
2. 请确认在生产线编辑器中设定的机器类型与实际机器的机器类型是否一致。如果不一致，请重新执行机器的登录。
------------------------------
Code: 61746102
Display: 执行错误
Used by:
Cause: 库信息Cause有错误。
Remedy: 请确认设备的库名和库类型。
------------------------------
Code: 61746103
Display: 执行错误
Used by:
Cause: 登录库信息失败。
Remedy: 请确认是否正常启动，以及网络连接好后是否正产工作。
------------------------------
Code: 61746104
第 2661 页
Display: 执行错误
Used by:
Cause: 模块构成与任务内的Machine Configuration不一致。
Remedy: 根据情况，进行下述对应。符合设备模块构成时，请确认任务内的模块构成并修正。符合任务内模块构成时
请更改设备的模块构成以及生产线构成服务器的模型标准值。
------------------------------
Code: 61746201
Display: 执行错误
Used by:
Cause: 生产线信息中设置了无法利用的COM端口。
Remedy: 请确认生产线编辑器中生产线信息里的COM端口设置。
------------------------------
Code: 61746202
Display: Boot error
Used by:
Cause: Unable to create directory for saving recipe revision file.
Remedy: The specified file directory is invalid or the directory could not be created. Check the settings file
is correct and whether a directory can be created.
------------------------------
Code: 61746203
Display: Boot error
Used by:
Cause: Unable to load a DLL (FNCTFFTP.DLL) required for execution.
Remedy: It is possible the system was not properly installed, or an important file has become corrupted
after installation. Please reinstall the operating system.
------------------------------
Code: 61746211
Display: Execution error
Used by:
Cause: The recipe revision file administration function is not enabled.
Remedy: A GEM machine may not be registered in the line. Register the GEM machine that is target of
the recipe revision file in the line. If the GEM machine is registered in the line, check the machine
transmission route [Disable GEM] setting is set to "No".
------------------------------
Code: 61746212
Display: Execution error
Used by:
Cause: Job transmission log does not exist.
Remedy: The recipe name or revision has been changed.
------------------------------
Code: 61746213
Display: Execution error
Used by:
Cause: The specified recipe revision file does not exist on the transmission server.
Remedy: The specified recipe revision file may have been loaded by another client.
------------------------------
Code: 61746214
Display: Execution error
Used by:
Cause: The recipe revision file is currently being read by another client.
Remedy: Retry after a few minutes or select a different file.
第 2662 页
------------------------------
Code: 61746215
Display: Execution error
Used by:
Cause: Unable to acquire or delete the recipe revision file from the machine.
Remedy: Either the recipe revision file does not exist or it cannot be operated. Check the recipe revision
file at the machine.
------------------------------
Code: 61746250
Display: Internal error
Used by:
Cause: Invalid parameter
Remedy: There may be a problem with the transmission server.
------------------------------
Code: 61746251
Display: Data processing error
Used by:
Cause: Unable to analyze the recipe revision file.
Remedy: There may be a problem with the recipe revision file.
------------------------------
Code: 61746252
Display: Data processing error
Used by:
Cause: The recipe revision file header does not exist.
Remedy: There may be a problem with the recipe revision file.
------------------------------
Code: 61746253
Display: Execution error
Used by:
Cause: The recipe revision administration file is invalid.
Remedy: It is possible the system was not properly installed, or an important file has become corrupted
after installation. Please reinstall the operating system.
------------------------------
Code: 61746254
Display: Internal error
Used by:
Cause: An internal error occurred.
Remedy: There may be a problem with the transmission server.
------------------------------
Code: 617462A0
Display: System error
Used by:
Cause: Unable to start thread.
Remedy: The operating system may be unstable. Restart the computer. If the error still occurs reinstall
the operating system.
------------------------------
Code: 617462A1
Display: Execution error
Used by:
Cause: Unable to open the recipe revision file.
Remedy: Either the available disk space is insufficient or a file has been corrupted after installation.
第 2663 页