FUJI错误代码查询.pdf - 第221页
0. ------------------------------ Code: 11082360 Display: Waffle Tray Overloaded Remove Part Used by: MTU4 Cause: Too many waffle trays have been stacked up. Remedy: Remove the overstacked waffle trays. -----------------…
------------------------------
Code: 11082341
Display: Illegal Part is Sub Nozzle (Remove Part)
Used by: MTU4
Cause: This error occurs when the machine judges that there is an undefined part on the sub-nozzle (for
example, the operator may have intentionally placed a part on the sub-nozzle).
Remedy: If there is a part on the sub-nozzle, remove it. Furthermore, check the part detection sensor.
------------------------------
Code: 11082350
Display: Part Not Been Transferred From Sob-nozzle to Carrier
Used by: MTU4
Cause: A picked part was dropped while the Z axis was moving from its ascent position to the position
where the part is placed on the carrier.
Remedy: Remove the part which was dropped
------------------------------
Code: 11082351
Display: Part Dropped During Carrier Movement (Remove Part)
Used by: MTU4
Cause: The part being moved into the machine by the carrier fell off the carrier.
Remedy: Remove the part which fell.
------------------------------
Code: 11082352
Display: Part Pusher Up Limit Sensor is Not ON
Used by: MTU4
Cause: When the clamp installed at the carrier 2nd position was raised, the up sensor did not come on.
Remedy: Check that air is being supplied and that the clamp mechanism and up sensor are functioning
normally.
------------------------------
Code: 11082353
Display: Part Pusher Down Limit Sensor is Not ON
Used by: MTU4
Cause: When the clamp installed at the carrier 2nd position was lowered, the down sensor did not come
on.
Remedy: Check that air is being supplied and that the clamp mechanism and down sensor are
functioning normally.
------------------------------
Code: 11082354
Display: Illegal Part is On Carrier (Remove Parts On Carrier)
Used by: MTU4
Cause: This error occurs when the machine judges that there is an undefined part on the carrier (for
example, the operator may have intentionally placed a part on the carrier).
Remedy: If there is a part on the carrier, remove it. Furthermore, check the part detection sensors at the
1st and 2nd positions.
------------------------------
Code: 11082355
Display: Carrier No.2 Pos. is In Part Data In Spite of No Part Pusher
Used by: MTU4
Cause: This error occurs if the 5th bit in the MTU4 Proper data item Machine_status is set to 0 (
indicating that the part clamp is not fitted), but in part data the 2nd position is specified.
Remedy: Check that there are no parts for which Carrier_select in part datais set to 1 (the 2nd position
setting) and that even if the parts clamp is installed, the 5th bit from the right in Machine_status is set to
第 220 页
0.
------------------------------
Code: 11082360
Display: Waffle Tray Overloaded Remove Part
Used by: MTU4
Cause: Too many waffle trays have been stacked up.
Remedy: Remove the overstacked waffle trays.
------------------------------
Code: 11082370
Display: Reject Tray Box Full
Used by: MTU4
Cause: This error occurs when discarded trays accumulate, causing the sensor beam to be cut for a
continued period of time.
Remedy: Remove the accumulated trays. Check the adjustment of the sensors. Check that there are no
other objects in the tray area.
------------------------------
Code: 11082380
Display: Tray Reject Error
Used by: MTU4
Cause: This error occurs when a tray which is to be ejected is released at the eject position but the eject
sensor does not detect the falling tray.
Remedy: If the tray cannot be picked up, adjust the tray pick up point set in part data's Tray_pickup_pnt
and check that the tray can be picked up. Furthermore, if this error occurs even when the tray is picked
up, check the sensor.
------------------------------
Code: 11082390
Display: Tray Plate Setting Error
Used by: MTU4
Cause: The tray plate set sensor was activated while the T axis was moving.
Remedy: Check that the tray plate door is not open and that the tray plate is firmly positioned.
------------------------------
Code: 110823A0
Display: No Tray
Used by: MTU4
Cause: There are no trays but manual tray positioning was attempted.
Remedy: Supply trays.
------------------------------
Code: 110823B0
Display: Tray Space Chk Sens. Not ON
Used by: MTU4
Cause: The robot safety sensor was not on when the Y axis moved to pick up a tray part or to eject a
tray.
Remedy: Check the robot safety sensor and the dog. Also check that a suitable value is entered for the
MTU Proper data item Origin_Position_T0 to ensure that the T axis origin is at the correct position.
------------------------------
Code: 110823C0
Display: Tray Number Internal Error
Used by: MTU3,MTU4,MTU
Cause: During tray positioning, an abnormal tray number was detected.
Remedy: Initialize the memory.
------------------------------
第 221 页
Code: 110823D0
Display: Y-Axis Not in Retract Pos
Used by: MTU4
Cause: The Y axis speed reduction sensor was not on when the T axis attempted to move.
Remedy: Check the Y axis speed reduction sensor and the dog. Also check that a suitable value has been
entered for the MTU4 Proper data item Carrier_Position_SY.
------------------------------
Code: 11082400
Display: 11082400
Used by: MTU3,MTU5
Cause: An attempt was made to advance the Y axis to the Z axis interlock position.
Remedy: Check the Z axis interlock sensor and dog.
------------------------------
Code: 11082410
Display: 11082410
Used by: MTU3,MTU5
Cause: When the sub-nozzle placed a part on the conveyor, the nozzle's vacuum sensor judged that there
was still a part on the nozzle.
Remedy: Check the mouth of the nozzle, the air supply, the sensor etc.
------------------------------
Code: 11082420
Display: 11082420
Used by: MTU3,MTU5
Cause: A tray part picked up by the sub-nozzle was dropped before it was placed on the conveyor.
Remedy: Check the mouth of the nozzle, the air supply system etc. Also check that suitable values have
been entered in part data and for the Proper data item Tray_Pos_T.
------------------------------
Code: 11082421
Display: 11082421
Used by: MTU3,MTU5
Cause: When an attempt was made to deliver a part to the IP machine, the conveyor parts check sensor
judged that there was no part on the conveyor.
Remedy: Check whether the part fell off the conveyor during delivery.
------------------------------
Code: 11082430
Display: 11082430
Used by: MTU3,MTU5
Cause: When the X and Z axes attempted to move during automatic operation, the Y axis retract sensor
was not on.
Remedy: Check that a suitable value has been entered for the Proper data item Interlock_SY.
Furthermore, adjust the sensor and the dog.
------------------------------
Code: 11082440
Display: 11082440
Used by: MTU3,MTU5
Cause: The Z axis retract sensor was off when the sub-nozzle shaft retracted during automatic operation.
Remedy: Check that the nozzle retracts correctly. Also check that the sensor is functioning correctly.
------------------------------
Code: 11082450
Display: 11082450
Used by: MTU3,MTU5
第 222 页