FUJI错误代码查询.pdf - 第1228页
------------------------------ Code: 1D008112 Display: Used by: Cause: Lead_length_x in Part data has not been specified. Remedy: Specify Lead_length_x in Part data. ------------------------------ Code: 1D008113 Display:…
Display: 要素的虚拟引脚检查错误
Used by: XP142,XP242
Cause: 在虚拟引脚部分没有发现引脚。
Remedy: 请确认元件以及供应方向是否错误、元件数据的Result的设定是否错误。
元件数据正确时，请调查吸取状态、影像的明亮度、焦距、污垢等。
多画面处理时，请确认以分割画面摄入的影像的合成是否正常地进行。合成没有正常地进行时，请确认元件的高
度和元件数据的 Part Height 是否正确、吸嘴置放地测定是否正常地进行。
------------------------------
Code: 1D00501B
Display: 要素的引脚中心的长度方向公差错误
Used by: XP142,XP242
Cause: 引脚中心的长度方向的公差检查错误。
Remedy: 请更换发生错误的元件或者确认元件数据是否正确。请特别确认Lead Center Tolerance 的数值是否极小。
元件数据正确时，请调查吸取状态、影像的明亮度、焦距、污垢等。
多画面处理时，请确认以分割画面摄入的影像的合成是否正常地进行。合成没有正常地进行时，请确认元件的高
度和元件数据的 Part Height 是否正确、吸嘴置放地测定是否正常地进行。
------------------------------
Code: 1D00501C
Display: 要素的引脚中心的宽度方向公差错误
Used by: XP142,XP242
Cause: 引脚中心的长度方向的公差检查错误。
Remedy: 请更换发生错误的元件或者确认元件数据是否正确。请特别确认Lead Center Tolerance 的数值是否极小。
元件数据正确时，请调查吸取状态、影像的明亮度、焦距、污垢等。
多画面处理时，请确认以分割画面摄入的影像的合成是否正常地进行。合成没有正常地进行时，请确认元件的高
度和元件数据的 Part Height 是否正确、吸嘴置放地测定是否正常地进行。
------------------------------
Code: 1D008002
Display:
Used by:
Cause: The part could not be picked. The nozzle used with this part is too large. Vision processing could
not detect any part.
Remedy: Re-supply parts. If parts were picked and this error occurred, make the nozzle smaller. Lower
the CCD level so that parts can be detected.
------------------------------
Code: 1D008100
Display:
Used by:
Cause: This Computer Vision No. is not supported.
Remedy: Check the Computer Vision No. in Part Data.
------------------------------
Code: 1D008110
Display:
Used by:
Cause: Lead_pitch (pitch between the lead spaces) in Part data has not been specified.
Remedy: Specify Lead_pitch in Part data.
------------------------------
Code: 1D008111
Display:
Used by:
Cause: Lead_width in Part data has not been specified.
Remedy: Specify Lead_width in Part data.
第 1227 页
------------------------------
Code: 1D008112
Display:
Used by:
Cause: Lead_length_x in Part data has not been specified.
Remedy: Specify Lead_length_x in Part data.
------------------------------
Code: 1D008113
Display:
Used by:
Cause: Lead_length_y in Part data has not been specified.
Remedy: Specify Lead_length_y in Part data.
------------------------------
Code: 1D008114
Display:
Used by:
Cause: Body_size_1 (body length in the X direction) in Part data has not been specified.
Remedy: Specify Body_size_1 in Part data.
------------------------------
Code: 1D008115
Display:
Used by:
Cause: Body_size_0 (body length in the Y direction) in Part data has not been specified.
Remedy: Specify Body_size_0 in Part data.
------------------------------
Code: 1D008120
Display:
Used by:
Cause: Qty_0 (the number of leads on the left side) in Part data has not been specified.
Remedy: Specify Qty_0.
------------------------------
Code: 1D008121
Display:
Used by:
Cause: Qty_1 (the number of leads on the lower side) in Part data has not been specified.
Remedy: Specify Qty_1.
------------------------------
Code: 1D008122
Display:
Used by:
Cause: Qty_2 (the number of leads on the right side) in Part data has not been specified.
Remedy: Specify Qty_2.
------------------------------
Code: 1D008123
Display:
Used by:
Cause: Qty_3 (the number of leads on the upper side) in Part data has not been specified.
Remedy: Specify Qty_3.
------------------------------
Code: 1D0082??
Display:
第 1228 页
Used by:
Cause: The body is too long in the X direction.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D0083??
Display:
Used by:
Cause: The body is too short in the X direction.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D0084??
Display:
Used by:
Cause: The body is too long in the Y direction.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D0085??
Display:
Used by:
Cause: The body is too short in the Y direction.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D0088??
Display:
Used by:
Cause: A lead on the left side of the part is too long. The final two digits indicate the lead number.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D0089??
Display:
Used by:
Cause: A lead on the left side of the part is too short. The final two digits indicate the lead number.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D008A??
Display:
Used by:
Cause: A lead on the lower side of the part is too long. The final two digits indicate the lead number.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D008B??
Display:
Used by:
Cause: A lead on the lower side of the part is too short. The final two digits indicate the lead number.
第 1229 页