FUJI错误代码查询.pdf - 第770页

Code: 12074?0B Display: "PMC?(ICM,SCU?) Error Code:********" (QP2) "CPU err (triggered pstn'g)" (QP2) PM?? ERROR Code:******** (QP132) Used by: QP242,QP201,QP202,QP203,QP132 Cause: Motion CPU err…

100%1 / 5282
------------------------------
Code: 12074?06
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;ZbrakeOn/Off" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (Z brake on/off).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?07
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;Stopping" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (stop command).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?08
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;Reduce Speed" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (deceleration command).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?09
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;Count Offset" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (counter offset).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?0A
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;0 Adjst Ofst" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (zero adjust offset too large).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
第 769 页
Code: 12074?0B
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"CPU err (triggered pstn'g)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion CPU error response (triggered positioning).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?0C
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"CPU err (nzzl check start)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion CPU error response (nozzle check start command).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?0D
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"CPU err (feeder chk start)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion CPU error response (feeder check start command).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?0E
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"CPU err (changed gain)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion CPU error response (gain change command).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?10
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Emergency Stop(PMC)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: This reports an emergency stop from the PMC.
This is a secondary error report from a sudden stoppage cause by the opening of a safety cover or use of
the EMERGENCY STOP button.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check the cause of the error, and use the RESET button to return to operation.
第 770 页
------------------------------
Code: 12074?11
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"NMI(PMC)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: NMI (axis common error data).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?12
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"0 Divide" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Zero division (axis common error data).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?13
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Overflow(PMC)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Overflow (axis common error data).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?14
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"INT_XX(PMC)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: INT_XX (axis common error data).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?15
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"2-Port RAM Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: 2-port RAM interrupt error (axis common error data).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
第 771 页