FUJI错误代码查询.pdf - 第1275页

Code: 1D040018 Display: Used by: Cause: There is too much part slippage at the pickup point. Remedy: Check pickup conditions. ------------------------------ Code: 1D040019 Display: Used by: Cause: There is too much part …

100%1 / 5282
Cause: Parts cannot be picked.
Remedy: Replenish the part supply.
------------------------------
Code: 1D040010
Display:
Used by:
Cause: The Y length is too short.
Remedy: Check the part length.
------------------------------
Code: 1D040011
Display:
Used by:
Cause: The part length in the Y direction is too long.
Remedy: Check the part length.
------------------------------
Code: 1D040012
Display:
Used by:
Cause: The pitch between leads is too narrow (by more than 20%).
Remedy: Check the part shape.
------------------------------
Code: 1D040013
Display:
Used by:
Cause: The pitch between leads is too wide (by more than 20%).
Remedy: Check the part shape.
------------------------------
Code: 1D040014
Display:
Used by:
Cause: There are too many leads.
Remedy: Check the part shape.
------------------------------
Code: 1D040015
Display:
Used by:
Cause: The pitch between leads is too narrow (by more than 20%).
Remedy: Check the part shape.
------------------------------
Code: 1D040016
Display:
Used by:
Cause: The pitch between leads is too wide (by more than 20%).
Remedy: Check the part shape.
------------------------------
Code: 1D040017
Display:
Used by:
Cause: There are too many leads.
Remedy: Check the part shape.
------------------------------
第 1274 页
Code: 1D040018
Display:
Used by:
Cause: There is too much part slippage at the pickup point.
Remedy: Check pickup conditions.
------------------------------
Code: 1D040019
Display:
Used by:
Cause: There is too much part slippage at the pickup point.
Remedy: Check pickup conditions.
------------------------------
Code: 1D04001A
Display:
Used by:
Cause: The part shape is not what was expected. Vision processing cannot take a good image.
Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.
------------------------------
Code: 1D04001B
Display:
Used by:
Cause: There are too many leads (set in PDG).
Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.
------------------------------
Code: 1D04001C
Display:
Used by:
Cause: There are too many leads (set in PDG).
Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.
------------------------------
Code: 1D040020
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D040021
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D040022
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
第 1275 页
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D040023
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.Make sure foreign matter is not stuck to the parts.
Remedy: Check the camera, vision processing board, cable and focus.
------------------------------
Code: 1D040024
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D040025
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D040026
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D040027
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D040028
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D040029
第 1276 页