FUJI错误代码查询.pdf - 第184页

Remedy: None. ------------------------------ Code: 11060017 Display: Used by: Cause: The line number is set outside the range 0~Z. Remedy: None. ------------------------------ Code: 11060018 Display: Used by: Cause: The …

100%1 / 5282
Display:
Used by:
Cause: The Proper transmit permission flag setting is finished.
Remedy: None.
------------------------------
Code: 1106000E
Display:
Used by:
Cause: KQ has not been received.
Remedy: None.
------------------------------
Code: 1106000F
Display:
Used by:
Cause: The line number is set outside the range 0~Z.
Remedy: None.
------------------------------
Code: 11060011
Display:
Used by:
Cause: The Proper transmit non-permission flag setting is finished.
Remedy: None.
------------------------------
Code: 11060012
Display:
Used by:
Cause: KQ has not been received.
Remedy: None.
------------------------------
Code: 11060013
Display:
Used by:
Cause: The line number is set outside the range 0~Z.
Remedy: None.
------------------------------
Code: 11060014
Display:
Used by:
Cause: The transmitted data was longer than specified.
Remedy: None.
------------------------------
Code: 11060015
Display:
Used by:
Cause: The Status transmit non-permission flag setting is finished.
Remedy: None.
------------------------------
Code: 11060016
Display:
Used by:
Cause: SQ has not been received.
第 183 页
Remedy: None.
------------------------------
Code: 11060017
Display:
Used by:
Cause: The line number is set outside the range 0~Z.
Remedy: None.
------------------------------
Code: 11060018
Display:
Used by:
Cause: The transmitted data was longer than specified.
Remedy: None.
------------------------------
Code: 1106001A
Display:
Used by:
Cause: The received message level mask is finished.
Remedy: None.
------------------------------
Code: 1106001B
Display:
Used by:
Cause: The program could not be transmitted in automatic operation.
Remedy: Interrupt automatic operation.
------------------------------
Code: 1106001C
Display:
Used by:
Cause: The data could not be changed in automatic operation.
Remedy: Interrupt automatic operation.
------------------------------
Code: 1106001D
Display:
Used by:
Cause: The garbage could not be collected in automatic operation.
Remedy: Interrupt automatic operation.
------------------------------
Code: 1106001E
Display:
Used by:
Cause: The Proper could not be transmitted in automatic operation.
Remedy: Interrupt automatic operation.
------------------------------
Code: 1106001F
Display:
Used by:
Cause: The Status data could not be transmitted in automatic operation.
Remedy: Interrupt automatic operation.
------------------------------
Code: 11060020
第 184 页
Display:
Used by:
Cause: __mcs_version was set for VQ. During execution of VQ a format error occurred in MCS or at the
machine.
Remedy: Check that the transmission cable is not disconnected. Re-transmit the data.
------------------------------
Code: 11060022
Display:
Used by:
Cause: Data could not be skipped in automatic operation.
Remedy: Interrupt automatic operation.
------------------------------
Code: 11060024
Display:
Used by:
Cause: There is no specified module for data skip.
Remedy: None.
------------------------------
Code: 11060025
Display:
Used by:
Cause: The reference for the data skip module is incorrect.
Remedy: None.
------------------------------
Code: 11060027
Display:
Used by:
Cause: There is no specified module for garbage collection.
Remedy: None.
------------------------------
Code: 11060028
Display:
Used by:
Cause: There is no specified module for data transmitted from the machine.
Remedy: None.
------------------------------
Code: 11060029
Display:
Used by:
Cause: The reference for the module for data transmitted from the machine is incorrect.
Remedy: None.
------------------------------
Code: 11060030
Display:
Used by:
Cause: Data cannot be changed (empty bit) while receiving dB.
Remedy: None.
------------------------------
Code: 11060031
Display:
Used by:
第 185 页