FUJI错误代码查询.pdf - 第2124页
------------------------------ Code: 2300300C Display: Registration application information for another computer is registered on this license file. This license file cannot be used. Used by: Cause: The license file regi…
------------------------------
Code: 23003003
Display: Could not read the license information from this file.
Used by:
Cause: The specified file may not be the license file.
Remedy: Perform license registration after verifying that the specified file is the license file.
------------------------------
Code: 23003004
Display: Could not write the license information to this file.
Used by:
Cause: The license file may be write-protected.
Remedy: Perform the license registration application process after removing the write-protection status for
the license file.
------------------------------
Code: 23003005
Display: Preparation for the MCS-X license registration application failed.
Used by:
Cause: Preparation for the license registration failed.
Remedy: Prepare the license registration again.
------------------------------
Code: 23003006
Display: MCS-X license registration failed.
Used by:
Cause: The MCS-X license registration failed.
Remedy: Restart the license registration.
------------------------------
Code: 23003007
Display: Please contact your Fuji sales representative if you are interested in purchasing this option.
If you have already purchased this option it will be activated when the MCS-X license is registered.
Used by:
Cause: The purchased or registered MCS-X license does not allow this option to be used.
Remedy: Please contact your Fuji sales representative if you are interested in purchasing this option.
If you have already purchased this option it will be activated when the MCS-X license is registered.
------------------------------
Code: 23003008
Display: License information is invalid. Restart the license registration procedure.
Used by:
Cause: The registered license information may be damaged.
Remedy: Re-register the license.
------------------------------
Code: 2300300A
Display: The network card cannot be found.
Used by:
Cause: The network card is not inserted, or the driver may not be installed.
Remedy: Insert the network card and install the driver. Check that the network can be used.
------------------------------
Code: 2300300B
Display: The MCS-X pre-registration period has expired.
Used by:
Cause: The MCS-X pre-registration period has expired.
Remedy: Restart MCS-X, and register the license at the "Pre-registration period expiry" screen.
第 2123 页
------------------------------
Code: 2300300C
Display: Registration application information for another computer is registered on this license file. This
license file cannot be used.
Used by:
Cause: The license file registration application can only be performed at one computer. This license file
has already been used for license registration application at another computer.
Remedy: Check the license file classification number. If the license registration application process was
performed at an incorrect computer, apply to your Fuji sales representative for a new license file.
------------------------------
Code: 2300300D
Display: The license key for another computer is registered on this license file. This license file cannot be
used.
Used by:
Cause: A license file that contains the license key for another computer is being used.
Remedy: Check the license file classification number. If the license registration application process was
performed at an incorrect computer, apply to your Fuji sales representative for a new license file.
------------------------------
Code: 2300300E
Display: This license file is to be used for applying for new license registration. This file cannot be used on
a computer for which license registration has been completed.
Used by:
Cause: A license file that may only be used for new license registration is being used on a computer for
which license registration has been completed.
Remedy: Check the license file classification number. If the license registration application process was
performed at an incorrect computer, apply to your Fuji sales representative for a new license file.
------------------------------
Code: 2300300F
Display: The registration application information for this computer is registered on this license file. This
file cannot be used on a computer for which license registration has been completed.
Used by:
Cause: An unregistered license file is being used to perform the license registration application process
on a computer for which license registration has been completed. This error does not normally occur.
Remedy: If a registered license file is missing, apply to your Fuji sales representative for a new license file.
------------------------------
Code: 23003010
Display: An attempt was made to register the license by an account without administrator rights.Logon
using an account with administrator rights and register the license.
Used by:
Cause: An attempt was made to register the license by an account without administrator rights.
Remedy: Logon using an account with administrator rights and register the license.
------------------------------
Code: 23004001
Display: The communications port cannot be opened.
Used by:
Cause: The communications port cannot be opened because of some reason.
(i.e., The port is being used or broken.)
Remedy: Valid the communications port. (i.e., Close the application which is using the port. etc)
------------------------------
Code: 23004002
Display: The received data is corrupt.
第 2124 页
Used by:
Cause: Invalid production program data has been downloaded.
(i.e., The program with more than 100 slots is downloaded to XP141.)
Remedy: Check to see if the slot number and stage number are correcet.etc.
------------------------------
Code: 23004003
Display: Failed to receive the program.
Used by:
Cause: Failed to receive the program.
Remedy: Transmit the program from MCS/2 again.
------------------------------
Code: 23004004
Display: There is no response from MCS/2.
Used by:
Cause: There is no response from MCS/2 for MCS-X data requiring signal.
Setting for cables or ports may be incorrect.
Remedy: Check to see if the cables and ports are fine, then transmit the data from MCS/2 again.
------------------------------
Code: 23005007
Display: Select the log files in succession.
Used by:
Cause: The selected log files in the displayed list are not in succession.
Remedy: Select log files in succession.
------------------------------
Code: 23005008
Display: Unable to create an error code table.
Used by:
Cause: An error code table could not be created.
Remedy: Check whether the XP error code file exists
>>(Install folder)\System\XP_ENG.ERR
If this file does not exist, it is necessary to reinstall the software.
------------------------------
Code: 23005009
Display: A program necessary for totalisation does not exist. [File Name] Continue with calculation?
Used by:
Cause: The program required for log file tabulation does not exist in the specified folder.
Remedy: Obtain the required program from the XP machine, and save the program in the specified folder.
------------------------------
Code: 2300E001
Display: Range error [item name].
Used by:
Cause: A value which exceeds the permissible input range was entered.
Remedy: Enter a value within the permissible input range.
------------------------------
Code: 2300E002
Display: Number of permissible characters exceeded. [item name].
Used by:
Cause: The number of entered characters exceeded the permissible number.
Remedy: Select the setting item where the error occurred to display the permissible number of characters
(input range) at the bottom of the window, then revise the setting data so that this range is not exceeded.
------------------------------
第 2125 页