FUJI错误代码查询.pdf - 第1073页
Display: "Multiple pilot board Error" Used by: QP242,QP201 Cause: The machine contains two or more pilot boards at one time. This error might also be caused by a malfunction of the sensor that detects pilot boa…
Display: I/D_Conv Time up Check I/D_conveyor
Used by: CP3,GL2,GSP2,GSP3,IP1
Cause: A board is caught on the ID conveyor.
Remedy: Send the caught board through. Check that the ID conveyor's board detection sensor is
operating correctly.
------------------------------
Code: 1301002D
Display: WARNING: Check Push Plate
Used by: GSP2,GSP3
Cause: The board lifter has not been removed.
Remedy: Remove the board lifter.
------------------------------
Code: 1301002E
Display: WARNING: Check Vacuum plate
Used by: GSP2,GSP3
Cause: The board holder has not been removed.
Remedy: Remove the board holder.
------------------------------
Code: 1301002F
Display:
Used by:
Cause: The board holder could not be clamped.
Remedy: Clamp the board holder. Alternately, remove the board holder and check the sensor (IN3-24
REMOVE_S_PLATE).
------------------------------
Code: 13010030
Display: Sectional Transmitting... (PROG NAME)
Used by: CP3,CP4-1,CP4-2,CP4-
3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL2,GL5,GL541,GSP2,GSP3,GSP5,GP2,GP3,GP551,GP6,IP
1,IP3,QP242,QP201
Cause: The program could not be changed while part of the reservation program was being transmitted.
Remedy: Wait until the section is transmitted, and then either re-execute the function or transmit the
reservation program.
------------------------------
Code: 13010031
Display: Sectional Transmit Error (PROG NAME)
Used by: CP3,CP4-1,CP4-2,CP4-
3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL2,GL5,GL541,GSP2,GSP3,GSP5,GP2,GP3,IP1,IP2,IP3,QP
242,QP201
Cause: The reservation program was invalid due to a transmission error, so the program could not be
changed.
Remedy: Re-transmit the reservation program.
------------------------------
Code: 13010032
Display: "Family Board Error"
Used by: QP242,QP201
Cause: When performing a seamless changeover using a pilot board, the production order table specified
a production program with either a different family board name or a different board width (QP2).
Remedy: Change the production order table.
------------------------------
Code: 13010033
第 1072 页
Display: "Multiple pilot board Error"
Used by: QP242,QP201
Cause: The machine contains two or more pilot boards at one time. This error might also be caused by a
malfunction of the sensor that detects pilot boards.
Remedy: Remove the pilot board from the ICM side of the first placing module, then feed it back into the
machine after all the boards currently in the machine have been fed out.
------------------------------
Code: 14010000
Display: Image Process Time Over
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The vision processing could not be carried out within the preset time limit.
Remedy: Check mark_data.
------------------------------
Code: 14010001
Display: err0001
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The color of the first search point is the color specified in the Black/White item but the edge of
the mark (the border between the mark color and base color) could not be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010002
Display: err0002
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The color of the first search point is the color specified in the Black/White item but the edge of
the mark (the border between the mark color and base color) does not form a closed shape.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010003
Display: err0003
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The color of the first search point is not the color specified in the Black/White item and the edge
of the mark ( the border between the mark color and base color) could not be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010004
Display: err0004
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The color of the first search point is the color specified in the Black/White item but the edge of
the mark (the border between the mark color and base color) does not form a closed shape.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010005
Display: err0005
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: An area with the opposite color of the mark was discovered but no mark could be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010006
Display: err0006
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: An area with the opposite color of the mark was discovered but no mark could be found.
第 1073 页
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010007
Display: err0007
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The perimeter of the fiducial mark is too small.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010008
Display: err0008
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: Processing interrupted as the perimeter of the fiducial mark is too large.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010009
Display: err0009
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: Noise was discovered (small areas with the same color as the mark) but no mark could be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 1401000A
Display: err000A
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: Small areas with the same color as the mark were discovered but no mark could be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 1401000B
Display: err000B
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: Small areas with the same color as the mark were discovered but no mark could be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 1401000C
Display: err000C
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: An area larger than the fiducial mark of the opposite color from the mark was found but no mark
could be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 1401000D
Display: err000D
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: An area with the opposite color of the mark was discovered but no mark could be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 1401000E
Display: err000E
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: An area with the opposite color of the mark was discovered but no mark could be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
第 1074 页