FUJI错误代码查询.pdf - 第2157页

optimizer, in cases where prompted to specify a file because the default file cannot be found, check the file contents and correct if necessary. ------------------------------ Code: 23050030 Display: No nozzle is registe…

contents and correct if necessary.

------------------------------

Code: 2305002B

Display: There are no data for "XP241" in the file.

Used by:

Cause: XP241 Nozzle Spec. information (XP241 specified in NZLSPEC/HEADER/TYPE) does not exist.

Remedy: There is a problem with the Nozzle Spec. file. Normally, the Nozzle Spec. file in the MCS-X

default directory is read automatically. Check that the file contains correct data. When starting up the

optimizer, in cases where prompted to specify a file because the default file cannot be found, check the file

contents and correct if necessary.

------------------------------

Code: 2305002C

Display: There is no field ["BLOCK", "SPEC+"] for "XP241" in the file.

Used by:

Cause: The field ["BLOCK","SPEC+"] does not exist in the XP241 Nozzle Spec. information (XP241

specified in NZLSPEC/HEADER/TYPE).

Remedy: There is a problem with the Nozzle Spec. file. Normally, the Nozzle Spec. file in the MCS-X

default directory is read automatically. Check that the file contains correct data. When starting up the

optimizer, in cases where prompted to specify a file because the default file cannot be found, check the file

contents and correct if necessary.

------------------------------

Code: 2305002D

Display: There is no nozzle information for "XP241" in the file.

Used by:

Cause: In the XP241 Nozzle Spec. information file (XP241 specified in NZLSPEC/HEADER/TYPE), there

are insufficient fields between the ["BLOCK","SPEC+"] field and the end of the file.

Remedy: There is a problem with the Nozzle Spec. file. Normally, the Nozzle Spec. file in the MCS-X

default directory is read automatically. Check that the file contains correct data. When starting up the

optimizer, in cases where prompted to specify a file because the default file cannot be found, check the file

contents and correct if necessary.

------------------------------

Code: 2305002E

Display: The nozzle items "NCFNAME", "NCFTYPE" or "NSPNSIZD" do not exist in the file.

Used by:

Cause: The Nozzle Name, Nozzle Type, and Nozzle Diameter cannot be obtained because one or more of

the fields, "NCFNAME", "NCFTYPE", and "NSPNSIZD" are missing from underneath the ["BLOCK","SPEC+"]

field in the XP241 Nozzle Spec. information file (XP241 specified in NZLSPEC/HEADER/TYPE).

Remedy: There is a problem with the Nozzle Spec. file. Normally, the Nozzle Spec. file in the MCS-X

default directory is read automatically. Check that the file contains correct data. When starting up the

optimizer, in cases where prompted to specify a file because the default file cannot be found, check the file

contents and correct if necessary.

------------------------------

Code: 2305002F

Display: A syntax error occurred because the data field count does not agree with the number of nozzle

specification items.

Used by:

Cause: The item count in the field immediately following the ["BLOCK","SPEC+"] field in the XP241 Nozzle

Spec. information file (XP241 specified in NZLSPEC/HEADER/TYPE) does not match the actual number of

items in the fields below that field.

Remedy: There is a problem with the Nozzle Spec. file. Normally, the Nozzle Spec. file in the MCS-X

default directory is read automatically. Check that the file contains correct data. When starting up the

第 2156 页

optimizer, in cases where prompted to specify a file because the default file cannot be found, check the file

contents and correct if necessary.

------------------------------

Code: 23050030

Display: No nozzle is registered.

Used by:

Cause: No fields containing data could be found in the second row below the ["BLOCK","SPEC+"] field or

beyond in the XP241 Nozzle Spec. information file (XP241 specified in NZLSPEC/HEADER/TYPE).

Remedy: There is a problem with the Nozzle Spec. file. Normally, the Nozzle Spec. file in the MCS-X

default directory is read automatically. Check that the file contains correct data. When starting up the

optimizer, in cases where prompted to specify a file because the default file cannot be found, check the file

contents and correct if necessary.

------------------------------

Code: 23050031

Display: The optimized program has not been saved yet. Will you save it?

Used by:

Cause: Attempting to open the program file, but the optimized program has not been saved to the file.

Remedy: Select [Yes] to display the dialog for saving the file with a new name.

Select [No] to abandon the optimized program, and display the dialog for selecting a new program file to be

optimized.

------------------------------

Code: 23050032

Display: The specified program file cannot be found. Search for a file?

Used by:

Cause: The specified program file name does not exist.

Remedy: Select [Yes] to display the dialog for selecting a program file to be read. Select [Abort] to cancel.

------------------------------

Code: 23050033

Display: The specified program file is not a CCIMF file (.pgo). Search for a file?

Used by:

Cause: The specified program file was not a CCIMF file.

Remedy: Select [Yes] to display the dialog for selecting a program file. Select [Abort] to cancel.

------------------------------

Code: 23050034

Display: The amount of nozzle data does not match with the nozzle data fields.

Used by:

Cause: In the Nozzle folder information file, the "NOZZLE","XP241+" field and the item count for the fields

following that field do not match.

Remedy: There is a problem with the program file. Check that the file contents are correct.

------------------------------

Code: 23050035

Display: The nozzle specified by the program file does not exist in Nozzle Configuration File and Nozzle

Specification File.

Do you want to continue?

Used by:

Cause: The nozzle specified in the program does not exist in the Nozzle Config. file and Nozzle Spec. file.

Remedy: Select [Yes] to ignore, and continue reading of the program file. Select [Abort] to cancel reading

of the program file.

------------------------------

Code: 23050036

Display: The following program file sequence's stage and slot No. are set to zero.

第 2157 页

Used by:

Cause: When either or both Stage and Slot number is zero, and the device number is also zero,

placement cannot be performed as the slot cannot be determined.

Remedy: There is a problem with a sequence field in the program file. Check that the file contents are

correct. The device number input range is 1 to 500. When specifying a stage - slot arrangement, when

stage 1 is specified, the slot number input range is 1 to 100, and when stage 2 is specified, the slot

number input range is 1 to 400.

------------------------------

Code: 23050037

Display: The program file feeder setup stage and slot No. are set to zero.

Used by:

Cause: When either or both Stage and Slot number is zero, and the device number is also zero, feeders

cannot be allotted as the slot cannot be determined.

Remedy: There is a problem with a feeder setup field in the program file. Check that the file contents are

correct.

The device number input range is 1 to 500.

When specifying a stage - slot arrangement, when stage 1 is specified, the slot number input range is 1 to

100, and when stage 2 is specified, the slot number input range is 1 to 400.

------------------------------

Code: 23050039

Display: No compatible nozzle diameter exists for this part.

Used by:

Cause: When creating the nozzle arrangement automatically, no Nozzle Diameter could be found within

the range defined by Minimum Nozzle Diameter and Maximum Nozzle Diameter in the part data.

Remedy: Try optimizing the program using [Automatic Nozzle Arrangement]. If still unsuccessful, check

the Minimum Nozzle Diameter (PARTS/ENVDT/XP241ENVDT-/PENMI) and Maximum Nozzle Diameter

(PARTS/ENVDT/XP241ENVDT-/PENMA) settings in the part data.

------------------------------

Code: 2305003A

Display: The stage/slot numbers for the following placement sequence in the program file are zero.

Used by:

Cause: Because either the stage or slot number is zero, the device number is referenced for calculation,

however the specified device number is outside the input range of 1 to 500.

Remedy: There is a problem with a sequence field in the program file. Check that the file contents are

correct.

The device number input range is 1 to 500.

When specifying a stage - slot arrangement, when stage 1 is specified, the slot number input range is 1 to

100, and when stage 2 is specified, the slot number input range is 1 to 400.

------------------------------

Code: 2305003B

Display: The stage number value in the following sequence in the program file is out of range.

Used by:

Cause: The slot number value is not zero, but the stage number value is out of range.

Remedy: There is a problem with a sequence field in the program file. Check that the file contents are

correct.

The stage number input range is 1 to 2.

------------------------------

Code: 2305003C

Display: The slot number value in the following sequence in the program file is out of range.

Used by:

Cause: The stage number value is 1, but the slot number value is out of range.

第 2158 页