FUJI错误代码查询.pdf - 第855页
------------------------------ Code: 1207F?8B Display: "SCU?(ICM,PMC?) Error Code:********" "PX-Axis Servo Alarm Counter Overflow" Used by: QP242 Cause: During axis movemen,the maximum counter value w…
Cause: A timeout occurred during communication with the RB servo unit. The ALM lamp on the RB unit
will light when this error occurs. (If the new RB unit is being used, an amp driver alarm will be indicated.)
"?" indicates the module number (QP2).
"****" indicates the error code.
Remedy: Restart processing after resetting. (If the new RB unit is being used, check the amp driver power
supply.)
------------------------------
Code: 1207F?86
Display: "SCU?(ICM,PMC?) Error Code:********"
"PX-Axis Servo Alarm Controller Processing"
Used by: QP242
Cause: Command execution was not possible because the RB controller was busy processing.
"?" indicates the module number (QP2).
"****" indicates the error code.
Remedy: Restart processing after resetting. The STOP signal of the RB interface unit may be stuck open.
------------------------------
Code: 1207F?87
Display: "SCU?(ICM,PMC?) Error Code:********"
"PX-Axis Servo Alarm Transmission Timeout"
Used by: QP242
Cause: The command's first character was not input within the specified time (30 ms).
"?" indicates the module number (QP2).
"****" indicates the error code.
Remedy: Press RESET and then restart operation.
------------------------------
Code: 1207F?88
Display: "SCU?(ICM,PMC?) Error Code:********"
"PX-Axis Servo Alarm Transmission Timeout"
Used by: QP242
Cause: The time between characters exceeds 100 ms.
"?" indicates the module number (QP2).
"****" indicates the error code.
Remedy: Press RESET and then restart operation.
------------------------------
Code: 1207F?89
Display: "SCU?(ICM,PMC?) Error Code:********"
"PX-Axis Servo Alarm Memory Failure"
Used by: QP242
Cause: Memory cannot be secured.
"?" indicates the module number (QP2).
"****" indicates the error code.
Remedy: Switch the power off and then on, then restart operation.
------------------------------
Code: 1207F?8A
Display: "SCU?(ICM,PMC?) Error Code:********"
"PX-Axis Servo Alarm Axis Alarm Still Occuring"
Used by: QP242
Cause: A command was received before the machine was reset.
"?" indicates the module number (QP2).
"****" indicates the error code.
Remedy: Press RESET and then restart operation.
第 854 页
------------------------------
Code: 1207F?8B
Display: "SCU?(ICM,PMC?) Error Code:********"
"PX-Axis Servo Alarm Counter Overflow"
Used by: QP242
Cause: During axis movemen,the maximum counter value was exceeded.
"?" indicates the module number (QP2).
"****" indicates the error code.
Remedy: Press RESET and then restart operation.
------------------------------
Code: 1207F?90
Display: "SCU?(PMC?,ICM) Error Code:********"
"PX-Axis Comm Error"
Used by: QP242
Cause: Cannot communicate with the servo unit.
"?" indicates the module number (QP2).
"****" indicates the error code.
Remedy: Check that the servo unit is properly connected.
------------------------------
Code: 1207F?91
Display: "SCU?(PMC?,ICM) Error Code:********"
"PX-Axis Memory Failure"
Used by: QP242
Cause: Memory cannot be secured.
"?" indicates the module number (QP2).
"****" indicates the error code.
Remedy: Switch the power off and then on, then restart operation.
------------------------------
Code: 1207F?92
Display: "SCU?(PMC?,ICM) Error Code:********"
"The PX-Axis Servo is OFF or an alarm is active."
Used by: QP242
Cause: The PX-axis servo is off or an alarm is active.
"?" indicates the module number (QP2).
"****" indicates the error code.
Remedy: If the PX-axis servo is off, check that the servo controller is being supplied with power. If an
alarm is active, clear the alarm and restart operation.
------------------------------
Code: 1207F?93
Display: "SCU?(PMC?,ICM) Error Code:********"
"A PX-axis servo parameter have not been set."
Used by: QP242
Cause: Check the parameters for the PX-axis.
"?" indicates the module number (QP2).
"****" indicates the error code.
Remedy: Set the PX-axis servo parameters, supply power and restart operation.
------------------------------
Code: 1207F?94
Display: "SCU?(PMC?,ICM) Error Code:********"
"Cancellation by PX-Axis stop command."
Used by: QP242
第 855 页
Cause: Axis operation terminated because a separate error occurred during communication.
"?" indicates the module number (QP2).
"****" indicates the error code.
Remedy: Press RESET and then restart operation.
------------------------------
Code: 1207F?95
Display: "SCU?(PMC?,ICM) Error Code:********"
"Error prior to PX-Axis Encorder Counter Operation"
Used by: QP242
Cause: The machine attempted to take an encoder count before the current count had been confirmed.
"?" indicates the module number (QP2).
"****" indicates the error code.
Remedy: Press RESET and then restart operation.
------------------------------
Code: 1207F?96
Display: "SCU?(PMC?,ICM) Error Code:********"
"PX-Axis Encorder Counter Overflow"
Used by: QP242
Cause: During axis movemen,the maximum counter value was exceeded.
"?" indicates the module number (QP2).
"****" indicates the error code.
Remedy: Press RESET and then restart operation.
------------------------------
Code: 1207F?97
Display: "SCU?(PMC?,ICM) Error Code:********"
"PX-Axis Encorder Counter Recieving Error"
Used by: QP242
Cause: An error occurred at the PX-axis servo controller when receiving data.
"?" indicates the module number (QP2).
"****" indicates the error code.
Remedy: Press RESET and then restart operation.
------------------------------
Code: 1207F?98
Display: "SCU?(PMC?,ICM) Error Code:********"
"Disconnected PX-Axis"
Used by: QP242
Cause: PX-axis is not connected.
"?" indicates the module number (QP2).
"****" indicates the error code.
Remedy: Check the RB controller cable connections.
------------------------------
Code: 1207F?99
Display: "SCU?(PMC?,ICM) Error Code:********"
"PX-Axis Servo Controller Timeout"
Used by: QP242
Cause: The PX-axis timed out.
"?" indicates the module number (QP2).
"****" indicates the error code.
Remedy: Press RESET and then restart operation.
------------------------------
Code: 1207F?9A
第 856 页