FUJI错误代码查询.pdf - 第458页

Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected, notify Fuji. ------------------------------ Code: 12037201 Display: CPU CH2 creation error Used by: CP4-1,CP4-2,CP4- …

100%1 / 5282
Display: I/O creation error
Used by: CP3,GP551,GP6,QP242,QP201,QP202,QP203
Cause: An error occurred due to a lack of memory in the machine control software. This error occurred
when Fuji OS system call_create_pia() which generates event control blocks (ICB ) for VM-1520, VM-1540,
and ACTIVE_PIA was used. The last number in the error code indicates the number of the board in which
the error occurred. 0 indicates the first board.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 12037130
Display: I/O creation error
Used by:
Cause: An error occurred due to a lack of memory in the machine control software. This error occurred
when Fuji OS system call_create_in() which generates event control blocks (ICB) for sequential address
input such as LUC and TSA-150 was used.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 12037140
Display: I/O creation error
Used by:
Cause: An error occurred due to a lack of memory in the machine control software. This error occurred
when Fuji OS system call_system(_CREATE_ICB) which generates input control blocks (ICB) for digital
input was used.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 12037150
Display: Interrupt creation error
Used by:
Cause: An attempt was made to register an interrupt as an entry interrupt but the vector number was
over 181. The entry interrupt registration was made by Fuji OS system call_create_int().
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 12037160
Display: Interrupt creation error
Used by: CP4-1,CP4-2
Cause: An attempt was made to register in the CPU a certain interrupt as an event issuing interrupt but
the vector number was over 181. Registration of the event issuing interrupt was made by Fuji OS system
call_create_int().
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 12037200
Display: CPU CH1 creation error
Used by: CP4-1,CP4-2,CP4-
3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL541,GP551,GP6,QP242,QP201,QP202,QP203
Cause: An error occurred due to a lack of memory in the machine control software. This error occurred
when Fuji OS system call_create_cpu_com() which automatically generates communication drivers for a 16
or 32 bit CPU board's channel 1 serial port was used.
第 457 页
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 12037201
Display: CPU CH2 creation error
Used by: CP4-1,CP4-2,CP4-
3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL541,GP551,GP6,QP242,QP201,QP202,QP203
Cause: An error occurred due to a lack of memory in the machine control software. This error occurred
when Fuji OS system call_create_cpu_com() which automatically generates communication drivers for a 16
or 32 bit CPU board's channel 2 serial port was used.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 12037202
Display: PIA PRN creation error
Used by: CP4-1,CP4-2,CP4-
3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL541,GP551,GP6,QP242,QP201,QP202,QP203
Cause: An error occurred due to a lack of memory in the machine control software. This error occurred
when Fuji OS system call_create_cpu_com() which automatically generates communication drivers for a 16
or 32 bit CPU board's parallel port was used.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 12037203
Display: CPU board type error
Used by: CP4-1,CP4-2,CP4-
3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL541,GP551,GP6,QP242,QP201,QP202,QP203
Cause: This CPU board type is not automatically generated. This error occurred when Fuji OS system
call_create_cpu_com() was used.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203721?
Display: ACIA creation error
Used by: CP5,CP642,CP643
Cause: An error occurred due to a lack of memory and duplicated settings when the MC6850 (ACIA)
driver was generated. This error occurred when Fuji OS system call_create_acia() was used. The last
number in the error code indicates the unit in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203722?
Display: ACIA DBG creation error
Used by: CP642,GP6,CP643
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
generate debugger MC6850 (ACIA). This error occurred when Fuji OS system call_create_acia_d() was
used. The last number in the error code indicates the unit in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203723?
第 458 页
Display: SMI creation error
Used by:
Cause: An error occurred due to a lack of memory and duplicated settings when the TC8577 (SMI) driver
was generated. This error occurred when Fuji OS system call_create_smi() was used. The last number in
the error code indicates the unit in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203724?
Display: SMI DBG creation error
Used by:
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
generate debugger MC8577 (ACIA). This error occurred when Fuji OS system call_create_smi_d() was
used. The last number in the error code indicates the unit in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203725?
Display: ARCNET creation error
Used by: CP3,CP5,QP242,QP201,QP202,QP203
Cause: An error occurred due to a lack of memory and duplicated settings when the ARCNET driver was
generated. This error occurred when Fuji OS system call_create_arcnet() was used. The last number in
the error code indicates the unit in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203726?
Display: PIA PRN creation error
Used by: CP642,CP643
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
create the driver for the PIA (MC6821) printer port. This error occurred when Fuji OS system
call_create_pia_prn() was used. The last number in the error code indicates the unit in which the error
occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203727?
Display: SECS/GEM creation error
Used by: CP642,CP643,QP242,QP201,QP202,QP203,GP6
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
generate the SECS/GEM driver. This error occurred when Fuji OS system call_create_vme132() was used.
The last number in the error code indicates the unit number in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203728?
Display: VM1440 creation error
Used by: CP3,CP4-1,CP4-2,CP4-3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL541,GP551,GP6,QP132
Cause: The machine control software failed to boot up the first 6 channel communications board. This
may be caused by insufficient memory or overlapping settings for that board. The final digit of the error
code indicates the device in question.
第 459 页