FUJI错误代码查询.pdf - 第2188页
------------------------------ Code: 51??0053 Display: Not status data. Used by: Cause: The specified file is not status data. Remedy: Check the "FILETYPE" and "FILESTRUCT" settings in "UNIT"…
Cause: The name is not specified in the header information of the specified file. The name for a
transmission image format production program is taken to be the same as the program name.
Remedy: Input the "NAME" item.
------------------------------
Code: 51??0039
Display: Too many part data entries.
Used by:
Cause: There are too many part data unit entries in the specified production program. This error occurs
when the production program and part data are in one file and the part data unit entries which are not
referred to exceed a fixed limit.
Remedy: Delete unused part data.
------------------------------
Code: 51??0040
Display: Image data transmission revision is different.
Used by:
Cause: The specified production program is a transmission image data file but the transmission data
revision entered in the program does not match the present machine transmission revision. For this
reason the specified production program cannot be downloaded.
Remedy: A transmission image format production program can only be downloaded if the machine's
transmission revision at the time the image format file was created and the present transmission revision
are the same.
------------------------------
Code: 51??0041
Display: Image data program name is different.
Used by:
Cause: The specified partial data is a transmission image data file, but the program name recorded in the
program does not agree with the program name specified in the command line. For this reason the
specified partial data cannot be downloaded.
Remedy: Transmission image format partial data can only be downloaded to the same program as
specified at the time of image format file creation.
------------------------------
Code: 51??0050
Display: Information reported from default check/file existence check.
Used by:
Cause: Information from the default check/file existence check has been reported. This is output as
supplementary information.
Remedy: Following the supplementary information, edit the files as necessary.
------------------------------
Code: 51??0051
Display: Not production program data.
Used by:
Cause: The specified file is not a production program.
Remedy: Check the "FILETYPE" and "FILESTRUCT" settings in "UNIT", "STRUCT" - "BLOCK", "HEADER-"
in the specified file.
------------------------------
Code: 51??0052
Display: Not Proper data.
Used by:
Cause: The specified file is not Proper data.
Remedy: Check the "FILETYPE" and "FILESTRUCT" settings in "UNIT", "STRUCT" - "BLOCK", "HEADER-"
in the specified file.
第 2187 页
------------------------------
Code: 51??0053
Display: Not status data.
Used by:
Cause: The specified file is not status data.
Remedy: Check the "FILETYPE" and "FILESTRUCT" settings in "UNIT", "STRUCT" - "BLOCK", "HEADER-"
in the specified file.
------------------------------
Code: 51??0054
Display: Machine type does not use mark data.
Used by:
Cause: The specified machine type does not use mark data. This message is reported if a machine type
which does not use mark data is detected during the mark data check. In such a case the content of the
production program is not checked.
Remedy:
------------------------------
Code: 51??0055
Display: Machine type does not use nozzle data.
Used by:
Cause: The specified machine type does not use nozzle data. This message is reported if a machine type
which does not use nozzle data is detected during the nozzle data check In such a case the content of the
production program is not checked.
Remedy:
------------------------------
Code: 51??0056
Display: Machine type does not use sequence data.
Used by:
Cause: The specified machine type does not use sequence data. At present this is not reported.
Remedy:
------------------------------
Code: 51??0057
Display: Machine type does not use device data.
Used by:
Cause: The specified machine type does not use device data. This message is reported if a machine type
which does not use device data is detected during the part data check. In such a case the content of the
production program is not checked.
Remedy:
------------------------------
Code: 51??0058
Display: Machine type does not use pallet data.
Used by:
Cause: The specified machine type does not use pallet data. At present this is not reported.
Remedy:
------------------------------
Code: 51??0059
Display: This machine type does not use GSS data.
Used by:
Cause: The specified machine type does not use GSS data.Presently,this error dose not display when it
occurs.
Remedy:
------------------------------
第 2188 页
Code: 51??0060
Display: The machine is transmitting.
Used by:
Cause: The machine with the specified nickname is presently transmitting other data.
Remedy: Execute in return on completion mode or execute again after waiting for a short time.
------------------------------
Code: 51??0061
Display: Incorrect reply from machine.
Used by:
Cause: An incorrect reply was reported from the machine. A description of the error is contained in the
supplementary information.
Remedy: Check the machine error code reported in the supplementary information and correct the data
or take other necessary steps.
------------------------------
Code: 51??0062
Display: Machine response time-up error.
Used by:
Cause: Even though the specified waiting time elapsed no response was returned from the machine.
Remedy: Check the machine status.
------------------------------
Code: 51??0063
Display: No program storage field in the machine.
Used by:
Cause: There is no field in the machine in which to download the program. There are already 10
production programs in the machine.
Remedy: After deleting unnecessary programs, execute download.
------------------------------
Code: 51??0064
Display: Program already exists.
Used by:
Cause: The specified production program is already in the machine.
Remedy: If downloading a program with the same name, append the overwrite option and then download.
Alternatively, execute download after deleting the relevant program.
------------------------------
Code: 51??0065
Display: There is no program.
Used by:
Cause: The specified production program is not in the machine.
Remedy:
------------------------------
Code: 51??0066
Display: Program in the foreground.
Used by:
Cause: Although the specified production program is already in the machine foreground, an attempt was
made to download it to the machine background.
Remedy:
------------------------------
Code: 51??0067
Display: Program in the background.
Used by:
Cause: Although the specified production program is already in the machine background, an attempt
第 2189 页