FUJI错误代码查询.pdf - 第1912页
Remedy: Check the special condition file. ------------------------------ Code: 21006513 Display: Part_data open error Used by: Cause: Part data open error. Remedy: Check the Part data. ------------------------------ Code…
Display: Separator frame open error
Used by:
Cause: Unable to open the production program.
Remedy: Check the production program.
------------------------------
Code: 2100650A
Display: Separator frame read error
Used by:
Cause: Production program read error.
Remedy: Check the production program.
------------------------------
Code: 2100650B
Display: Separator frame write error
Used by:
Cause: Production program write error.
Remedy: Check that the write protect setting is not on.
------------------------------
Code: 2100650C
Display: Machine_type_table read error
Used by:
Cause: Machine type read error.
Remedy: Re-install the software.
------------------------------
Code: 2100650D
Display: Machine_type_table open error
Used by:
Cause: Machine type table open error.
Remedy: Re-install the software.
------------------------------
Code: 2100650F
Display: Program file copy error
Used by:
Cause: Production program copy error.
Remedy: Check that the write protect setting is not on.
------------------------------
Code: 21006510
Display: Device queue data not found
Used by:
Cause: The device queue was not found.
Remedy: Re-install the software.
------------------------------
Code: 21006511
Display: Special condition file read error
Used by:
Cause: Special condition file read error.
Remedy: Check the special condition file.
------------------------------
Code: 21006512
Display: special condition file open error
Used by:
Cause: Special condition file open error.
第 1911 页
Remedy: Check the special condition file.
------------------------------
Code: 21006513
Display: Part_data open error
Used by:
Cause: Part data open error.
Remedy: Check the Part data.
------------------------------
Code: 21006514
Display: Part_data read error
Used by:
Cause: Part data read error.
Remedy: Check the Part data.
------------------------------
Code: 21006516
Display: Device_data queue create error
Used by:
Cause: Device data queue create error.
Remedy: Check the device data.
------------------------------
Code: 21006517
Display: frame status 'OPEN' is nothing
Used by:
Cause: There was no empty slot for the device.
Remedy: This device cannot move to the specified machine.
------------------------------
Code: 21006518
Display: None separate machine
Used by:
Cause: Separation has been prohibited in the special conditions file.
Remedy: Check the file.
------------------------------
Code: 21006519
Display: Separate frame error
Used by:
Cause: Separate frame file error.
Remedy: Check that the contents of the source program device data and the contents of part data are the
same.
------------------------------
Code: 2100651A
Display: program_file read error
Used by:
Cause: Production program read error.
Remedy: Check the production program.
------------------------------
Code: 2100651B
Display: program_file write error
Used by:
Cause: Production program write error.
Remedy: Check that the write protect setting is not on. If it is not on, check the available memory on the
hard disk.
第 1912 页
------------------------------
Code: 2100651C
Display: offset_table read error
Used by:
Cause: Offset table read error.
Remedy: Re-install the software.
------------------------------
Code: 2100651D
Display: program_file open error
Used by:
Cause: Production program open error.
Remedy: Check the production program.
------------------------------
Code: 2100651E
Display: program_file read error
Used by:
Cause: Production program read error.
Remedy: Check the production program.
------------------------------
Code: 2100651F
Display: program_file write error
Used by:
Cause: Production program write error.
Remedy: Check that the write protect setting is not on.
------------------------------
Code: 21006520
Display: defferent data 'd_comment' and 'part name'
Used by:
Cause: The destination machine had these settings, and there is a difference in the d_comments and the
Part data between the base machine and the destination machine.
Remedy: This is a warning. Production will continue.
------------------------------
Code: 21006521
Display: defferent data 'd_comment'
Used by:
Cause: When the next machine had these settings, there is a difference in the d_comments between the
base machine and the destination machine.
Remedy: This is a warning. Production will continue.
------------------------------
Code: 21006522
Display: defferent data 'part name'
Used by:
Cause: When the next machine had these settings, there is a difference in the part name between the
base machine and the destination machine.
Remedy: This is a warning. Production will continue.
------------------------------
Code: 21006523
Display: frame status FIX 'base' and 'distination'
Used by:
Cause: The base move and the destination move's frame status is different.
Remedy: Check the settings of the permanent set and special variables files.
第 1913 页