FUJI错误代码查询.pdf - 第1953页
Cause: The input program filename is too long. Remedy: Check the filename. ------------------------------ Code: 2100763F Display: Output program file name is too long Used by: Cause: The output program filename is too lo…
Code: 21007636
Display: Different cartridge name in PST file
Used by:
Cause: The feeder name in the PST file is wrong.
Remedy: Check the PST file feeder name.
------------------------------
Code: 21007637
Display: PST file data type unmatch
Used by:
Cause: The PST file data type is incorrect.
Remedy: Use the Editor to check the file. If there are problems, recreate the file.
------------------------------
Code: 21007638
Display: Base program file data type unmatch
Used by:
Cause: The base program data type is incorrect.
Remedy: Use the Editor to check the file. If there are problems, recreate the file.
------------------------------
Code: 21007639
Display: Program file offset data read error
Used by:
Cause: Unable to read the file.
Remedy: Use the Editor to check the file. If there are problems, recreate the file.
------------------------------
Code: 2100763A
Display: Program file header read error
Used by:
Cause: Unable to read the file.
Remedy: Use the Editor to check the file. If there are problems, recreate the file.
------------------------------
Code: 2100763B
Display: Base program file read error
Used by:
Cause: Unable to read the file.
Remedy: Use the Editor to check the file. If there are problems, recreate the file.
------------------------------
Code: 2100763C
Display: Part data header read error
Used by:
Cause: Unable to read the file.
Remedy: Use the Editor to check the file. If there are problems, recreate the file.
------------------------------
Code: 2100763D
Display: Input program file not found
Used by:
Cause: Input program file was not found.
Remedy: Check the filename.
------------------------------
Code: 2100763E
Display: Input program file name is too long
Used by:
第 1952 页
Cause: The input program filename is too long.
Remedy: Check the filename.
------------------------------
Code: 2100763F
Display: Output program file name is too long
Used by:
Cause: The output program filename is too long.
Remedy: Check the filename.
------------------------------
Code: 21007640
Display: Permanent Set Table name is too long
Used by:
Cause: The Permanent Set Table name is too long.
Remedy: Check the filename.
------------------------------
Code: 21007641
Display: Base program file name is too long
Used by:
Cause: The base program filename is too long.
Remedy: Check the filename.
------------------------------
Code: 21007642
Display: Illegal format at Machine type table
Used by:
Cause: The machine type table format is illegal.
Remedy: Re-install the software.
------------------------------
Code: 21007643
Display: Make not mount sequence
Used by:
Cause: The Queue data (used in the strategy section of the system file) could not be created.
Remedy: Reboot MCS. If the error recurs, replace the MPU (memory) board.
------------------------------
Code: 21007644
Display: No entry Machine name
Used by:
Cause: The machine entered in the "Type" heading in "Sep_data" could not be found.
Remedy: Input the correct machine name under the "Type" (do not forget to also input "Time" and
"Device_Name") heading.
------------------------------
Code: 21007645
Display: Cam_table file open error
Used by:
Cause: The system file could not be opened.
Remedy: Re-install the Automatic Programming software.
------------------------------
Code: 21007646
Display: Cam_table file read error
Used by:
Cause: The system file could not be read.
Remedy: Re-install the Automatic Programming software.
第 1953 页
------------------------------
Code: 21007647
Display: Cam_table file seek error
Used by:
Cause: The seek function did not work on the system file.
Remedy: Re-install the Automatic Programming software.
------------------------------
Code: 21007648
Display: Cam_table file path read error
Used by:
Cause: The input path could not be specified.
Remedy: Re-boot MCS. If the error recurs, re-install the software.
------------------------------
Code: 21007649
Display: Not get cycle time
Used by:
Cause: Management time could not be calculated.
Remedy: Re-install the Automatic Programming software.
------------------------------
Code: 2100764A
Display: Illegal format at Cam_table
Used by:
Cause: The cam table is not formatted correctly.
Remedy: Re-install the Automatic Programming software.
------------------------------
Code: 2100764B
Display: Pairing pattern file open error
Used by:
Cause: The system file could not be opened.
Remedy: Re-install the Automatic Programming software.
------------------------------
Code: 2100764C
Display: Pairing pattern file read error
Used by:
Cause: The system file could not be read.
Remedy: Re-install the Automatic Programming software.
------------------------------
Code: 2100764D
Display: Pairing pattern file file value different
Used by:
Cause: The contents of the system file are not normal.
Remedy: Re-install the Automatic Programming software.
------------------------------
Code: 2100764E
Display: Not get queue position
Used by:
Cause: Memory could not be processed.
Remedy: Re-boot MCS.
------------------------------
Code: 2100764F
Display: Sequence data co-ordinates over range
第 1954 页