FUJI错误代码查询.pdf - 第1306页

Cause: The lead length is too long (longer than the PDG setting by over 10%). Remedy: Check that the nozzle is not dirty and that there are no foreign particles on the part. Check that the correct part is being picked. -…

Cause: The part pickup slippage was too large (Y direction).

Remedy: Check how the parts are being supplied.

------------------------------

Code: 1D05E???

Display:

Used by:

Cause: The image in vision processing is not correct so operation was canceled.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D05F???

Display:

Used by:

Cause: There was a logical error in the management probram.

Remedy: Check Part data.

------------------------------

Code: 1D060002

Display:

Used by:

Cause: Parts are not being picked.

Remedy: Replenish the part supply.

------------------------------

Code: 1D060004

Display:

Used by:

Cause: The part condition is not correct.

Remedy: Check the image, and check the part size.

------------------------------

Code: 1D060010

Display:

Used by:

Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too

uneven. There is foreign matter stuck to the part.

Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not

stuck to the parts.

------------------------------

Code: 1D060011

Display:

Used by:

Cause: An edge without leads cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D060012

Display:

Used by:

Cause: The lead length is not long enough (shorter than the PDG setting by over 10%).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D060013

Display:

Used by:

第 1305 页

Cause: The lead length is too long (longer than the PDG setting by over 10%).

Remedy: Check that the nozzle is not dirty and that there are no foreign particles on the part. Check that

the correct part is being picked.

------------------------------

Code: 1D060014

Display:

Used by:

Cause: The lead length is not long enough (shorter than the PDG setting by over 10%).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D060015

Display:

Used by:

Cause: The lead length is too long (longer than the PDG setting by over 10%).

Remedy: Check that the nozzle is not dirty and that there are no foreign particles on the part. Check that

the correct part is being picked.

------------------------------

Code: 1D060016

Display:

Used by:

Cause: The lead length is not long enough (shorter than the PDG setting by over 10%).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D060017

Display:

Used by:

Cause: The lead length is too long (longer than the PDG setting by over 10%).

Remedy: Check that the nozzle is not dirty and that there are no foreign particles on the part. Check that

the correct part is being picked.

------------------------------

Code: 1D060018

Display:

Used by:

Cause: The lead length is not long enough (shorter than the PDG setting by over 10%).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D060019

Display:

Used by:

Cause: The lead length is too long (longer than the PDG setting by over 10%).

Remedy: Check that the nozzle is not dirty and that there are no foreign particles on the part. Check that

the correct part is being picked.

------------------------------

Code: 1D06001A

Display:

Used by:

Cause: The shape of the part was strange. Vision processing cannot take a good image.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D06001B

Display:

第 1306 页

Used by:

Cause: There are too many leads (set in PDG).

Remedy: Check that the nozzle is not dirty, that there are no foreign particles on the part, and that the

correct part is being analyzed.

------------------------------

Code: 1D06001C

Display:

Used by:

Cause: There are too many leads (compared with the PDG setting).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D060020

Display:

Used by:

Cause: There are too many leads (compared with the PDG setting).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D060021

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D060022

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D060023

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D060024

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D060025

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D060026

Display:

Used by:

Cause: The corner lead cannot be found.

第 1307 页