FUJI错误代码查询.pdf - 第1952页

Code: 21007636 Display: Different cartridge name in PST file Used by: Cause: The feeder name in the PST file is wrong. Remedy: Check the PST file feeder name. ------------------------------ Code: 21007637 Display: PST fi…

100%1 / 5282
------------------------------
Code: 2100762E
Display: Can not setting Next device data
Used by:
Cause: As there are too many devices in use, the next device cannot be set.
Remedy: Reduce the number of devices in use.
------------------------------
Code: 2100762F
Display: Next device not found
Used by:
Cause: The next device was not found.
Remedy: This message appears when there is no next device specified in the program.
------------------------------
Code: 21007630
Display: Cartridge name get error
Used by:
Cause: The feeder name is not input in the Device_name section of Sep_data in Part data.
Remedy: Check that the Part data has been entered correctly.
------------------------------
Code: 21007631
Display: Station over
Used by:
Cause: The device cannot be placed in the station.
Remedy: Join the feeders. Alternately, stop using the PST or the base program. Alternately, use fewer
devices.
------------------------------
Code: 21007632
Display: Occupancy data read error
Used by:
Cause: Unable to read the information.
Remedy: Re-install the software.
------------------------------
Code: 21007633
Display: Slot info data read error
Used by:
Cause: Unable to read the information.
Remedy: Re-install the software.
------------------------------
Code: 21007634
Display: New program file has no sequence
Used by:
Cause: There are no sequences in the new program file.
Remedy: Use the editor to check the input file.
------------------------------
Code: 21007635
Display: Parts height regulation over
Used by:
Cause: The part height exceeds the set limit.
Remedy: Check the Part data part height. It must be 4 mm or less on the FCP-II, and 6 mm or less on
other machines.
------------------------------
第 1951 页
Code: 21007636
Display: Different cartridge name in PST file
Used by:
Cause: The feeder name in the PST file is wrong.
Remedy: Check the PST file feeder name.
------------------------------
Code: 21007637
Display: PST file data type unmatch
Used by:
Cause: The PST file data type is incorrect.
Remedy: Use the Editor to check the file. If there are problems, recreate the file.
------------------------------
Code: 21007638
Display: Base program file data type unmatch
Used by:
Cause: The base program data type is incorrect.
Remedy: Use the Editor to check the file. If there are problems, recreate the file.
------------------------------
Code: 21007639
Display: Program file offset data read error
Used by:
Cause: Unable to read the file.
Remedy: Use the Editor to check the file. If there are problems, recreate the file.
------------------------------
Code: 2100763A
Display: Program file header read error
Used by:
Cause: Unable to read the file.
Remedy: Use the Editor to check the file. If there are problems, recreate the file.
------------------------------
Code: 2100763B
Display: Base program file read error
Used by:
Cause: Unable to read the file.
Remedy: Use the Editor to check the file. If there are problems, recreate the file.
------------------------------
Code: 2100763C
Display: Part data header read error
Used by:
Cause: Unable to read the file.
Remedy: Use the Editor to check the file. If there are problems, recreate the file.
------------------------------
Code: 2100763D
Display: Input program file not found
Used by:
Cause: Input program file was not found.
Remedy: Check the filename.
------------------------------
Code: 2100763E
Display: Input program file name is too long
Used by:
第 1952 页
Cause: The input program filename is too long.
Remedy: Check the filename.
------------------------------
Code: 2100763F
Display: Output program file name is too long
Used by:
Cause: The output program filename is too long.
Remedy: Check the filename.
------------------------------
Code: 21007640
Display: Permanent Set Table name is too long
Used by:
Cause: The Permanent Set Table name is too long.
Remedy: Check the filename.
------------------------------
Code: 21007641
Display: Base program file name is too long
Used by:
Cause: The base program filename is too long.
Remedy: Check the filename.
------------------------------
Code: 21007642
Display: Illegal format at Machine type table
Used by:
Cause: The machine type table format is illegal.
Remedy: Re-install the software.
------------------------------
Code: 21007643
Display: Make not mount sequence
Used by:
Cause: The Queue data (used in the strategy section of the system file) could not be created.
Remedy: Reboot MCS. If the error recurs, replace the MPU (memory) board.
------------------------------
Code: 21007644
Display: No entry Machine name
Used by:
Cause: The machine entered in the "Type" heading in "Sep_data" could not be found.
Remedy: Input the correct machine name under the "Type" (do not forget to also input "Time" and
"Device_Name") heading.
------------------------------
Code: 21007645
Display: Cam_table file open error
Used by:
Cause: The system file could not be opened.
Remedy: Re-install the Automatic Programming software.
------------------------------
Code: 21007646
Display: Cam_table file read error
Used by:
Cause: The system file could not be read.
Remedy: Re-install the Automatic Programming software.
第 1953 页