FUJI错误代码查询.pdf - 第912页

Code: 1220600f Display: Port error Used by: Cause: Failed to open COM Port.(Radds-Shell) Remedy: Reinstall software if this error cannot be corrected after reboot, because the Radds-Shell could be damaged. --------------…

100%1 / 5282
Code: 12205008
Display: Updating...
Used by:
Cause: The firmware is being updated. (Update shell)
Remedy: The firmware is being updated, do not carry out any other operations.
------------------------------
Code: 12205009
Display: The number of updates has exceeded 100.
Used by:
Cause: The number of write operations to the board has exceeded the number under which operation
can be guaranteed. (Update shell)
Remedy: Prepare a spare board because the number of write operations to the board has exceeded the
number under which operation can be guaranteed.
------------------------------
Code: 1220600a
Display: Port error
Used by:
Cause: The COM port been already open.(Radds-Shell)
Remedy: Please cancel an error.
When this error comes out frequently, Reboot the machine.
Reinstall software if this error cannot be corrected after reboot, because the Radds-Shell could be
damaged.
------------------------------
Code: 1220600b
Display: Port error
Used by:
Cause: The COM port been still not open.(Radds-Shell)
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Radds-Shell could
be damaged.
------------------------------
Code: 1220600c
Display: Port error
Used by:
Cause: Timeout occurred in the initialize statge.(Radds-Shell)
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Radds-Shell could
be damaged.
------------------------------
Code: 1220600d
Display: Port error
Used by:
Cause: Timeout occurred in the command-sending statge.(Radds-Shell)
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Radds-Shell could
be damaged.
------------------------------
Code: 1220600e
Display: Load error
Used by:
Cause: Failed to load Dll.(Radds-Shell)
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Radds-Shell could
be damaged.
------------------------------
第 911 页
Code: 1220600f
Display: Port error
Used by:
Cause: Failed to open COM Port.(Radds-Shell)
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Radds-Shell could
be damaged.
------------------------------
Code: 12206010
Display: Port error
Used by:
Cause: Failed to set COM Port.(Radds-Shell)
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Radds-Shell could
be damaged.
------------------------------
Code: 12206011
Display: Port error
Used by:
Cause: Failed to set timeout.(Radds-Shell)
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Radds-Shell could
be damaged.
------------------------------
Code: 12206012
Display: Port error
Used by:
Cause: Failed to write to COM Port.(Radds-Shell)
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Radds-Shell could
be damaged.
------------------------------
Code: 12206013
Display: Port error
Used by:
Cause: Failed to read from COM Port.(Radds-Shell)
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Radds-Shell could
be damaged.
------------------------------
Code: 12206014
Display: Port error
Used by:
Cause: Failed to close COM Port.(Radds-Shell)
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Radds-Shell could
be damaged.
------------------------------
Code: 12206015
Display: Response error
Used by:
Cause: The controller has returned the code which is not ACK or NAK.(Radds-Shell)
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Radds-Shell could
be damaged.
------------------------------
Code: 12206016
Display: Check Sum error
第 912 页
Used by:
Cause: The Check sum error occurred.(Radds-Shell)
Remedy: Reboot the machine or Reinstall software.
Replace Radds controller with a new one if this error is not corrected after reinstall,
because the controller could be damaged.
------------------------------
Code: 12206017
Display: Response error
Used by:
Cause: The shell has not received data correctly.(Radds-Shell)
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Radds-Shell could
be damaged.
------------------------------
Code: 12206018
Display: Response error
Used by:
Cause: The shell has no response from the controller.(Radds-Shell)
Remedy: Replace Radds controller with a new one if this error is not corrected after reboot,
because the controller could be damaged.
------------------------------
Code: 12206019
Display: Que error
Used by:
Cause: The Que is full.(Radds-Shell)
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Radds-Shell could
be damaged.
------------------------------
Code: 1220601a
Display: Que error
Used by:
Cause: The Que has no receive data.(Radds-Shell)
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Radds-Shell could
be damaged.
------------------------------
Code: 1220601b
Display: Que error
Used by:
Cause: Failed to clear the que.(Radds-Shell)
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Radds-Shell could
be damaged.
------------------------------
Code: 1220601c
Display: Transmitting waiting state
Used by:
Cause: It is a transmitting waiting state.(Radds-Shell)
Remedy: Please cancel an error.
When this error comes out frequently, Reboot the machine.
Reinstall software if this error cannot be corrected after reboot, because the Radds-Shell could be
damaged.
------------------------------
Code: 1220601d
第 913 页