FUJI错误代码查询.pdf - 第814页

Code: 1207C?C4 Display: "PMC?(ICM,SCU?) Error Code:********" (QP2) "Phase PC Disconnected" (QP2) PM?? ERROR Code:******** (QP132) Used by: QP242,QP201,QP202,QP203,QP132 Cause: Q-axis servopack phase P…

100%1 / 5282
------------------------------
Code: 1207C?B4
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Current Fdback Errr/Phase V" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Q-axis servopack current feedback error in phase V.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether the motor power wire (phase V) has become broken or short-circuited.
------------------------------
Code: 1207C?B5
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Watch-dog Circuit Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Q-axis servopack watchdog detection circuit error.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Servopack replacement may be necessary.
------------------------------
Code: 1207C?C1
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Motor/Encoder Wrong Wiring" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Q-axis servopack malfunction (due to a wiring error of motor or encoder).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Servopack replacement may be necessary.
------------------------------
Code: 1207C?C2
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Detected Wrong Phase" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Q-axis servopack phase error detected (for new incremental encoder only).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether the encoder wire has become broken or short-circuited.
------------------------------
Code: 1207C?C3
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Phase PA/PB Disconnected" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Q-axis servopack phase PA or PB is disconnected.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether the encoder wire has become broken or short-circuited.
------------------------------
第 813 页
Code: 1207C?C4
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Phase PC Disconnected" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Q-axis servopack phase PC is disconnected.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether the encoder wire has become broken or short-circuited.
------------------------------
Code: 1207C?C5
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"PG Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Q-axis servopack PG error.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether the encoder wire has become broken or short-circuited.
------------------------------
Code: 1207C?F3
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Momentary Power Failure" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Momentary power failure alarm in Q-axis servopack (detected when power is resupplied during
power maintenance interval).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 1207C?FF
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Undefined error in Q-axis servopack.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 1207E?00
Display: "SCU?(ICM,PMC?) Error Code:********" (QP2)
"SCU Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: SCU error.
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: Turn the SCU off and on again, then restart from zero setting.
------------------------------
Code: 1207E?01
Display: "SCU?(ICM,PMC?) Error Code:********" (QP2)
第 814 页
"IOCountMachConstrctMismatch" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The I/O quantity does not match the machine configuration.
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: This error should not occur under normal conditions.
------------------------------
Code: 1207E?02
Display: "SCU?(ICM,PMC?) Error Code:********" (QP2)
"Sig From Next Stge Time Out" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: A timeout occurred while waiting for the next stage.
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: Make sure that boards are smoothly sent on to the next stage. Make sure that the board arrival
check sensor at the next stage is functioning normally.
------------------------------
Code: 1207E?03
Display: "SCU?(ICM,PMC?) Error Code:********" (QP2)
"Board Loading Time Out" (QP2)
Used by: QP242,QP201,QP202,QP203
Cause: A timeout occurred while waiting to load a board.
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: Make sure that boards are smoothly sent from the previous stage smoothly. Make sure that the
board arrival check sensor is functioning normally.
------------------------------
Code: 1207E?04
Display: "SCU?(ICM,PMC?) Error Code:********" (QP2)
"Board Exists" (QP2)
Used by: QP242,QP201,QP202,QP203
Cause: There is a board on the conveyor.
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: Remove the board that is on the conveyor. Make sure that the board arrival check sensor is
functioning normally.
------------------------------
Code: 1207E?05
Display: "SCU?(ICM,PMC?) Error Code:********" (QP2)
"Thermal Tripped" (QP2)
Used by: QP242,QP201,QP202,QP203
Cause: Thermal relay has been tripped.
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: Reset the thermal relay.
------------------------------
Code: 1207E?06
Display: "SCU?(ICM,PMC?) Error Code:********" (QP2)
"Reject Parts Conveyor Full" (QP2)
Used by: QP242,QP201,QP202,QP203
Cause: The reject conveyor is full.
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: Remove the rejected parts from the reject conveyor. Make sure that the reject conveyor full
check sensor is functioning normally.
第 815 页