FUJI错误代码查询.pdf - 第2183页

Used by: Cause: The nickname is incorrect. Remedy: Check the specified nickname. ------------------------------ Code: 51??0003 Display: Either the file name or path name is too long. Used by: Cause: File names may be up …

100%1 / 5282
Cause: There is no reported code data at the LMS.
Remedy: Check the LMS data table.
------------------------------
Code: 31003113
Display: CELL MODE ERROR Check CELL_STATUS
Used by: CP3,CP4-1,CP4-2,CP4-
3.CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL2,GL5,GL541,GSP2,GSP3,GSP5,GP2,GP3,GP6,IP1,IP3,Q
P242,QP201
Cause: The reported board type is not the same as the board type waiting at the LMS.
Remedy: Check cell status or changeover mode.
------------------------------
Code: 31003114
Display: LMS is BUSY Waiting for LMS edition
Used by: GSP2,GSP3,IP3
Cause: The LMS production schedule table was being prepared when information was reported.
Remedy: Wait for the LMS to finish preparing the production schedule table.
------------------------------
Code: 31003116
Display: 31003116
Used by:
Cause: A command was sent to a passive cell.
Remedy: Check the LMS and the machine cell status settings and enter correct values.
------------------------------
Code: 31003117
Display: 31003117
Used by:
Cause: The status data is out of range.
Remedy: Check the cell status values and enter correct values.
------------------------------
Code: 31003118
Display: 31003118
Used by:
Cause: There is no reserved data.
Remedy: Check the table data, etc. necessary for changeover and then perform changeover again.
------------------------------
Code: 51??0000
Display: Normal ending or normal start.
Used by:
Cause: The command was completed normally or started normally (when using immediate return mode).
Remedy:
------------------------------
Code: 51??0001
Display: Command format error.
Used by:
Cause: One of the following mistakes has been made in the format of the command. Either the
subcommand name is incorrect, the number of arguments is incorrect or an invalid argument has been
specified as the option argument.
Remedy: Check that there are no mistakes in the command format.
------------------------------
Code: 51??0002
Display: Nickname error.
第 2182 页
Used by:
Cause: The nickname is incorrect.
Remedy: Check the specified nickname.
------------------------------
Code: 51??0003
Display: Either the file name or path name is too long.
Used by:
Cause: File names may be up to 23 characters and path names may be up to 127 characters.
Remedy: Check the specified file and path names.
------------------------------
Code: 51??0004
Display: The file name is incorrect.
Used by:
Cause: The specified file name is incorrect.
Remedy: Check the specified file name.
------------------------------
Code: 51??0005
Display: Machine not supported.
Used by:
Cause: Either the machine type or the command is not supported.
Remedy: Check the specified nickname and machine type.
------------------------------
Code: 51??0006
Display: Revision not supported.
Used by:
Cause: The revision cannot be supported by the machine or a mistake has been made in specifying the
revision.
Remedy: Check how the revision was specified.
------------------------------
Code: 51??0007
Display: Specified revision does not exist.
Used by:
Cause: This revision does not exist in the machine.
Remedy:
------------------------------
Code: 51??0008
Display: Specified job number is out of range.
Used by:
Cause: The job number specified in the command line is incorrect.
Remedy: Check the specified job number.
------------------------------
Code: 51??0009
Display: Specified job does not exist.
Used by:
Cause: The job specified by the nickname and job number does not exist.
Remedy:
------------------------------
Code: 51??0010
Display: Partial data setting is incorrect.
Used by:
Cause: There is an error in the partial data setting specified in the command line.
第 2183 页
Remedy: Check the partial data setting.
------------------------------
Code: 51??0011
Display: Read level setting is incorrect.
Used by:
Cause: There is an error in the read level setting specified in the command line.
Remedy: Check the read level setting.
------------------------------
Code: 51??0012
Display: The file type setting is incorrect.
Used by:
Cause: There is an error in the file type setting specified in the command line.
Remedy: Check the file type setting.
------------------------------
Code: 51??0013
Display: The host name setting is incorrect.
Used by:
Cause: There is an error in the host name specified in the command line.
Remedy: Check the host name setting.
------------------------------
Code: 51??0014
Display: The block number setting is incorrect.
Used by:
Cause: There is an error in the block number specified in the command line.
Remedy: Check the block number setting.
------------------------------
Code: 51??0015
Display: The line configuration setting is incorrect.
Used by:
Cause: There is an error in the line configuration specified in the command line.
Remedy: Check the line configuration setting.
------------------------------
Code: 51??0020
Display: File format error.
Used by:
Cause: There is a mistake in the format of the production program file, the pallet data file, the partial
data file, the Proper data file or the status data file.
Remedy: Check and correct the file format. Supplementary data may be displayed which will indicate the
approximate location of the error.
------------------------------
Code: 51??0021
Display: Arrived at EOF.
Used by:
Cause: A file was read and an EOF was detected at a location where it was not expected.
Remedy: Check and correct the contents of the file.
------------------------------
Code: 51??0022
Display: File already exists.
Used by:
Cause: The specified file already exists.
Remedy: Check the specified file name. If the file can be overwritten, specify the overwrite command and
第 2184 页