FUJI错误代码查询.pdf - 第55页
MTU on the machine, these devices cannot be used. This is to prevent possible interference between feeders and the carrier. This message applies to sequences 626~750. Remedy: Check the above mentioned sequences and alter…
Remedy: Refer to the above device numbers and enter correct values for the package type in Part data.
------------------------------
Code: 11011710
Display:
Used by: IP2
Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an
MTU on the machine, these devices cannot be used. This is to prevent possible interference between
feeders and the carrier. This message applies to sequences 1~125.
Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3
(85~87 if there is a left MTU) are not used.
------------------------------
Code: 11011711
Display:
Used by: IP2
Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an
MTU on the machine, these devices cannot be used. This is to prevent possible interference between
feeders and the carrier. This message applies to sequences 126~250.
Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3
(85~87 if there is a left MTU) are not used.
------------------------------
Code: 11011712
Display:
Used by: IP2
Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an
MTU on the machine, these devices cannot be used. This is to prevent possible interference between
feeders and the carrier. This message applies to sequences 251~375.
Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3
(85~87 if there is a left MTU) are not used.
------------------------------
Code: 11011713
Display:
Used by: IP2
Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an
MTU on the machine, these devices cannot be used. This is to prevent possible interference between
feeders and the carrier. This message applies to sequences 376~500.
Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3
(85~87 if there is a left MTU) are not used.
------------------------------
Code: 11011714
Display:
Used by: IP2
Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an
MTU on the machine, these devices cannot be used. This is to prevent possible interference between
feeders and the carrier. This message applies to sequences 501~625.
Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3
(85~87 if there is a left MTU) are not used.
------------------------------
Code: 11011715
Display:
Used by: IP2
Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an
第 54 页
MTU on the machine, these devices cannot be used. This is to prevent possible interference between
feeders and the carrier. This message applies to sequences 626~750.
Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3
(85~87 if there is a left MTU) are not used.
------------------------------
Code: 11011716
Display:
Used by: IP2
Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an
MTU on the machine, these devices cannot be used. This is to prevent possible interference between
feeders and the carrier. This message applies to sequences 751~875.
Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3
(85~87 if there is a left MTU) are not used.
------------------------------
Code: 11011717
Display:
Used by: IP2
Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an
MTU on the machine, these devices cannot be used. This is to prevent possible interference between
feeders and the carrier. This message applies to sequences 876~1000.
Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3
(85~87 if there is a left MTU) are not used.
------------------------------
Code: 11011718
Display:
Used by: IP2
Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an
MTU on the machine, these devices cannot be used. This is to prevent possible interference between
feeders and the carrier. This message applies to sequences 1001~1125.
Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3
(85~87 if there is a left MTU) are not used.
------------------------------
Code: 11011719
Display:
Used by: IP2
Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an
MTU on the machine, these devices cannot be used. This is to prevent possible interference between
feeders and the carrier. This message applies to sequences 1126~1250.
Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3
(85~87 if there is a left MTU) are not used.
------------------------------
Code: 1101171A
Display:
Used by: IP2
Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an
MTU on the machine, these devices cannot be used. This is to prevent possible interference between
feeders and the carrier. This message applies to sequences 1251~1375.
Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3
(85~87 if there is a left MTU) are not used.
------------------------------
Code: 1101171B
第 55 页
Display:
Used by: IP2
Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an
MTU on the machine, these devices cannot be used. This is to prevent possible interference between
feeders and the carrier. This message applies to sequences 1376~1500.
Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3
(85~87 if there is a left MTU) are not used.
------------------------------
Code: 1101171C
Display:
Used by: IP2
Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an
MTU on the machine, these devices cannot be used. This is to prevent possible interference between
feeders and the carrier. This message applies to sequences 1501~1625.
Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3
(85~87 if there is a left MTU) are not used.
------------------------------
Code: 1101171D
Display:
Used by: IP2
Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an
MTU on the machine, these devices cannot be used. This is to prevent possible interference between
feeders and the carrier. This message applies to sequences 1626~1750.
Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3
(85~87 if there is a left MTU) are not used.
------------------------------
Code: 1101171E
Display:
Used by: IP2
Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an
MTU on the machine, these devices cannot be used. This is to prevent possible interference between
feeders and the carrier. This message applies to sequences 1751~1875.
Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3
(85~87 if there is a left MTU) are not used.
------------------------------
Code: 1101171F
Display:
Used by: IP2
Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an
MTU on the machine, these devices cannot be used. This is to prevent possible interference between
feeders and the carrier. This message applies to sequences 1876~2000.
Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3
(85~87 if there is a left MTU) are not used.
------------------------------
Code: 11011C00
Display:
Used by: IP2
Cause: There are parts requiring coplanarity check on the fixed nozzles (holders 2, 3). Coplanarity check
can only be carried out using holder 1 or 4. This error occurs in sequence 1 to 125.
Remedy: Check that the 1.Coplanarity_check item in Coplanarity in Part data is not set to YES for this
part (even if the part does not require a coplanarity check). If this part does require a coplanarity check,
第 56 页