FUJI错误代码查询.pdf - 第1217页

Remedy: This is not a common error. There could be a visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error occurs multiple times. ------------------------------ Code: 1CFF0030…

100%1 / 5282
------------------------------
Code: 1CFF0029
Display: 1CFF0029
Used by:
Cause: An unsupported machine model was specified.
Remedy: A machine model other than NP1, NP2, CP7, or QP3 was specified when vision processing was
started. Check the "machine type" setting.
------------------------------
Code: 1CFF002A
Display: 1CFF002A
Used by:
Cause: Failed to start the RTX execution process.
Remedy: Either there is no VDFRtxProcQP3.rtss, or the file has been corrupted. Check these items.
------------------------------
Code: 1CFF002B
Display: 1CFF002B
Used by:
Cause: Cannot connect to the shared memory where the start status is saved.
Remedy: An error occurred at RtOpenSharedMemory(). This is not a common error. There could be a
visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error occurs
multiple times.
------------------------------
Code: 1CFF002C
Display: 1CFF002C
Used by:
Cause: Failed to wait for the shutter control response.
Remedy: An error occurred at ffGetShutterControlRsp(). This is not a common error. There could be a
visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error occurs
multiple times.
------------------------------
Code: 1CFF002D
Display: 1CFF002D
Used by:
Cause: The specified camera either does not exist, or it is not a CCD camera.
Remedy: A nonexistent camera ID was specified for the camera which can change the shutter speed. Or,
a line scan camera was specified.
------------------------------
Code: 1CFF002E
Display: 1CFF002E
Used by:
Cause: A waiting period time-up occurred for the "vision processing results" response from simultaneous
2-mark processing.
Remedy: The mark vision processing result was not reported from the VP within the prescribed period of
time. At present, the VA has no wait period (unlimited wait), so this error does not occur. This is not a
common error. There could be a visionsystem abnormality. Restart the system. Obtain the trace data
and contact Fuji if this error occurs multiple times.
------------------------------
Code: 1CFF002F
Display: 1CFF002F
Used by:
Cause: Exception processing occurred during vision processing.
第 1216 页
Remedy: This is not a common error. There could be a visionsystem abnormality. Restart the system.
Obtain the trace data and contact Fuji if this error occurs multiple times.
------------------------------
Code: 1CFF0030
Display: 1CFF0030
Used by:
Cause: Execution of an unsupported command was attempted.
Remedy: The ID of the attempted command was in the UlSubCode. This is not a common error. There
could be a visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this
error occurs multiple times.
------------------------------
Code: 1CFF0032
Display: 1CFF0032
Used by:
Cause: The connection port number for the line-scan camera is not correct.
Remedy: A value "6" or less has been set for the connection port number.Line-scan cameras must be a
value "7" or greater.An incorrect camera ID is entered for the "ulSubCode".
------------------------------
Code: 1CFF0033
Display: 1CFF0033
Used by:
Cause: Failed to send VP execute command.
Remedy: A function error was returned while attempting to send the VP execute command. The vision
command ID specified in the ulSubcode is output. This is a rarely occurring error. There could be a
problem with the vision system. Cut and then resupply power to the machine. If this does not rectify the
problem, contact Fuji. Obtain a trace report.
------------------------------
Code: 1CFF0034
Display: 1CFF0034
Used by:
Cause: VP execute command timeout error.
Remedy: The vision processing execute command was not received within the specified time. The vision
command ID specified in the ulSubcode is output. This error should not normally occur as the VA time
out period is unlimited. There could be a problem with the vision system. Cut and then resupply power to
the machine. If this does not rectify the problem, contact Fuji. Obtain a trace report.
------------------------------
Code: 1CFF0035
Display: 1CFF0035
Used by:
Cause: Error occurred while waiting for VP result.
Remedy: An error was returned while attempting the VP result response. There could be a problem with
the vision system. Cut and then resupply power to the machine. If this does not rectify the problem,
contact Fuji. Obtain a trace report.
------------------------------
Code: 1CFF0036
Display: 1CFF0036
Used by:
Cause: Image file could not be opened.
Remedy: Verify that the folder used for storing image files exists.
------------------------------
Code: 1CFF0037
第 1217 页
Display: 1CFF0037
Used by:
Cause: Failed to save image.
Remedy: There may be insufficient disk space. Verify there is enough free disk space available.
------------------------------
Code: 1CFF0038
Display: 1CFF0038
Used by:
Cause: An error occurred during vision processing.
Remedy: An error occurred during vision processing. This is not a common error.There could be a
problem with the vision processing system. Restart the system and continue production. If this error
occurs repeatedly, please save the image, obtain trace data, and contact Fuji.
------------------------------
Code: 1CFF010C
Display: 1CFF010C
Used by:
Cause: IC mark check and cut check were not registered.
Remedy: The machine can not register these checks, if it is using an old version of vision
processing.Change the part data so that the first pin check is not carried out. Or use the new version
(V2.42 or later).
------------------------------
Code: 1CFF5001
Display: 1CFF5001
Used by:
Cause: Failed to generate the "acquire object".
Remedy: This error occurs if a re-registration is attempted without deleting the object. This is not a
common error. There could be a visionsystem abnormality. Restart the system. Obtain the trace data
and contact Fuji if this error occurs multiple times.
------------------------------
Code: 1CFF5002
Display: 1CFF5002
Used by:
Cause: Failed to set the "acquire object" CCD camera properties.
Remedy: This error occurs if these settings are attempted before "acquire object" is generated. This is not
a common error. There could be a visionsystem abnormality. Restart the system. Obtain the trace data
and contact Fuji if this error occurs multiple times.
------------------------------
Code: 1CFF5003
Display: 1CFF5003
Used by:
Cause: Failed to set the "acquire object" LS camera properties.
Remedy: This error occurs if these settings are attempted before "acquire object" is generated. This is not
a common error. There could be a visionsystem abnormality. Restart the system. Obtain the trace data
and contact Fuji if this error occurs multiple times.
------------------------------
Code: 1CFF5004
Display: 1CFF5004
Used by:
Cause: Failed to set the "acquire object" utility settings.
Remedy: This error occurs if these settings are attempted before "acquire object" is generated. This is not
a common error. There could be a visionsystem abnormality. Restart the system. Obtain the trace data
第 1218 页